ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.76.246.0/24
network10.76.246.0/24
broadcast10.76.246.255
first host10.76.246.1
last host10.76.246.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.246.0/24
address00001010.01001100.11110110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.11110110.00000000
broadcast00001010.01001100.11110110.11111111
green = network part, grey = host part
hex0x0a4cf600
decimal172815872
reverse dns0.246.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:f600

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.246.0/3010.76.246.1 – 10.76.246.210.76.246.3
210.76.246.4/3010.76.246.5 – 10.76.246.610.76.246.7
310.76.246.8/3010.76.246.9 – 10.76.246.1010.76.246.11
410.76.246.12/3010.76.246.13 – 10.76.246.1410.76.246.15
510.76.246.16/3010.76.246.17 – 10.76.246.1810.76.246.19
610.76.246.20/3010.76.246.21 – 10.76.246.2210.76.246.23
710.76.246.24/3010.76.246.25 – 10.76.246.2610.76.246.27
810.76.246.28/3010.76.246.29 – 10.76.246.3010.76.246.31
910.76.246.32/3010.76.246.33 – 10.76.246.3410.76.246.35
1010.76.246.36/3010.76.246.37 – 10.76.246.3810.76.246.39
1110.76.246.40/3010.76.246.41 – 10.76.246.4210.76.246.43
1210.76.246.44/3010.76.246.45 – 10.76.246.4610.76.246.47
1310.76.246.48/3010.76.246.49 – 10.76.246.5010.76.246.51
1410.76.246.52/3010.76.246.53 – 10.76.246.5410.76.246.55
1510.76.246.56/3010.76.246.57 – 10.76.246.5810.76.246.59
1610.76.246.60/3010.76.246.61 – 10.76.246.6210.76.246.63
1710.76.246.64/3010.76.246.65 – 10.76.246.6610.76.246.67
1810.76.246.68/3010.76.246.69 – 10.76.246.7010.76.246.71
1910.76.246.72/3010.76.246.73 – 10.76.246.7410.76.246.75
2010.76.246.76/3010.76.246.77 – 10.76.246.7810.76.246.79
2110.76.246.80/3010.76.246.81 – 10.76.246.8210.76.246.83
2210.76.246.84/3010.76.246.85 – 10.76.246.8610.76.246.87
2310.76.246.88/3010.76.246.89 – 10.76.246.9010.76.246.91
2410.76.246.92/3010.76.246.93 – 10.76.246.9410.76.246.95
2510.76.246.96/3010.76.246.97 – 10.76.246.9810.76.246.99
2610.76.246.100/3010.76.246.101 – 10.76.246.10210.76.246.103
2710.76.246.104/3010.76.246.105 – 10.76.246.10610.76.246.107
2810.76.246.108/3010.76.246.109 – 10.76.246.11010.76.246.111
2910.76.246.112/3010.76.246.113 – 10.76.246.11410.76.246.115
3010.76.246.116/3010.76.246.117 – 10.76.246.11810.76.246.119
3110.76.246.120/3010.76.246.121 – 10.76.246.12210.76.246.123
3210.76.246.124/3010.76.246.125 – 10.76.246.12610.76.246.127
3310.76.246.128/3010.76.246.129 – 10.76.246.13010.76.246.131
3410.76.246.132/3010.76.246.133 – 10.76.246.13410.76.246.135
3510.76.246.136/3010.76.246.137 – 10.76.246.13810.76.246.139
3610.76.246.140/3010.76.246.141 – 10.76.246.14210.76.246.143
3710.76.246.144/3010.76.246.145 – 10.76.246.14610.76.246.147
3810.76.246.148/3010.76.246.149 – 10.76.246.15010.76.246.151
3910.76.246.152/3010.76.246.153 – 10.76.246.15410.76.246.155
4010.76.246.156/3010.76.246.157 – 10.76.246.15810.76.246.159
4110.76.246.160/3010.76.246.161 – 10.76.246.16210.76.246.163
4210.76.246.164/3010.76.246.165 – 10.76.246.16610.76.246.167
4310.76.246.168/3010.76.246.169 – 10.76.246.17010.76.246.171
4410.76.246.172/3010.76.246.173 – 10.76.246.17410.76.246.175
4510.76.246.176/3010.76.246.177 – 10.76.246.17810.76.246.179
4610.76.246.180/3010.76.246.181 – 10.76.246.18210.76.246.183
4710.76.246.184/3010.76.246.185 – 10.76.246.18610.76.246.187
4810.76.246.188/3010.76.246.189 – 10.76.246.19010.76.246.191
4910.76.246.192/3010.76.246.193 – 10.76.246.19410.76.246.195
5010.76.246.196/3010.76.246.197 – 10.76.246.19810.76.246.199
5110.76.246.200/3010.76.246.201 – 10.76.246.20210.76.246.203
5210.76.246.204/3010.76.246.205 – 10.76.246.20610.76.246.207
5310.76.246.208/3010.76.246.209 – 10.76.246.21010.76.246.211
5410.76.246.212/3010.76.246.213 – 10.76.246.21410.76.246.215
5510.76.246.216/3010.76.246.217 – 10.76.246.21810.76.246.219
5610.76.246.220/3010.76.246.221 – 10.76.246.22210.76.246.223
5710.76.246.224/3010.76.246.225 – 10.76.246.22610.76.246.227
5810.76.246.228/3010.76.246.229 – 10.76.246.23010.76.246.231
5910.76.246.232/3010.76.246.233 – 10.76.246.23410.76.246.235
6010.76.246.236/3010.76.246.237 – 10.76.246.23810.76.246.239
6110.76.246.240/3010.76.246.241 – 10.76.246.24210.76.246.243
6210.76.246.244/3010.76.246.245 – 10.76.246.24610.76.246.247
6310.76.246.248/3010.76.246.249 – 10.76.246.25010.76.246.251
6410.76.246.252/3010.76.246.253 – 10.76.246.25410.76.246.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →