ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.240.0/22
network10.76.240.0/22
broadcast10.76.243.255
first host10.76.240.1
last host10.76.243.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.76.240.0/22
address00001010.01001100.11110000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01001100.11110000.00000000
broadcast00001010.01001100.11110011.11111111
green = network part, grey = host part
hex0x0a4cf000
decimal172814336
reverse dns0.240.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:f000

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.240.0/2810.76.240.1 – 10.76.240.1410.76.240.15
210.76.240.16/2810.76.240.17 – 10.76.240.3010.76.240.31
310.76.240.32/2810.76.240.33 – 10.76.240.4610.76.240.47
410.76.240.48/2810.76.240.49 – 10.76.240.6210.76.240.63
510.76.240.64/2810.76.240.65 – 10.76.240.7810.76.240.79
610.76.240.80/2810.76.240.81 – 10.76.240.9410.76.240.95
710.76.240.96/2810.76.240.97 – 10.76.240.11010.76.240.111
810.76.240.112/2810.76.240.113 – 10.76.240.12610.76.240.127
910.76.240.128/2810.76.240.129 – 10.76.240.14210.76.240.143
1010.76.240.144/2810.76.240.145 – 10.76.240.15810.76.240.159
1110.76.240.160/2810.76.240.161 – 10.76.240.17410.76.240.175
1210.76.240.176/2810.76.240.177 – 10.76.240.19010.76.240.191
1310.76.240.192/2810.76.240.193 – 10.76.240.20610.76.240.207
1410.76.240.208/2810.76.240.209 – 10.76.240.22210.76.240.223
1510.76.240.224/2810.76.240.225 – 10.76.240.23810.76.240.239
1610.76.240.240/2810.76.240.241 – 10.76.240.25410.76.240.255
1710.76.241.0/2810.76.241.1 – 10.76.241.1410.76.241.15
1810.76.241.16/2810.76.241.17 – 10.76.241.3010.76.241.31
1910.76.241.32/2810.76.241.33 – 10.76.241.4610.76.241.47
2010.76.241.48/2810.76.241.49 – 10.76.241.6210.76.241.63
2110.76.241.64/2810.76.241.65 – 10.76.241.7810.76.241.79
2210.76.241.80/2810.76.241.81 – 10.76.241.9410.76.241.95
2310.76.241.96/2810.76.241.97 – 10.76.241.11010.76.241.111
2410.76.241.112/2810.76.241.113 – 10.76.241.12610.76.241.127
2510.76.241.128/2810.76.241.129 – 10.76.241.14210.76.241.143
2610.76.241.144/2810.76.241.145 – 10.76.241.15810.76.241.159
2710.76.241.160/2810.76.241.161 – 10.76.241.17410.76.241.175
2810.76.241.176/2810.76.241.177 – 10.76.241.19010.76.241.191
2910.76.241.192/2810.76.241.193 – 10.76.241.20610.76.241.207
3010.76.241.208/2810.76.241.209 – 10.76.241.22210.76.241.223
3110.76.241.224/2810.76.241.225 – 10.76.241.23810.76.241.239
3210.76.241.240/2810.76.241.241 – 10.76.241.25410.76.241.255
3310.76.242.0/2810.76.242.1 – 10.76.242.1410.76.242.15
3410.76.242.16/2810.76.242.17 – 10.76.242.3010.76.242.31
3510.76.242.32/2810.76.242.33 – 10.76.242.4610.76.242.47
3610.76.242.48/2810.76.242.49 – 10.76.242.6210.76.242.63
3710.76.242.64/2810.76.242.65 – 10.76.242.7810.76.242.79
3810.76.242.80/2810.76.242.81 – 10.76.242.9410.76.242.95
3910.76.242.96/2810.76.242.97 – 10.76.242.11010.76.242.111
4010.76.242.112/2810.76.242.113 – 10.76.242.12610.76.242.127
4110.76.242.128/2810.76.242.129 – 10.76.242.14210.76.242.143
4210.76.242.144/2810.76.242.145 – 10.76.242.15810.76.242.159
4310.76.242.160/2810.76.242.161 – 10.76.242.17410.76.242.175
4410.76.242.176/2810.76.242.177 – 10.76.242.19010.76.242.191
4510.76.242.192/2810.76.242.193 – 10.76.242.20610.76.242.207
4610.76.242.208/2810.76.242.209 – 10.76.242.22210.76.242.223
4710.76.242.224/2810.76.242.225 – 10.76.242.23810.76.242.239
4810.76.242.240/2810.76.242.241 – 10.76.242.25410.76.242.255
4910.76.243.0/2810.76.243.1 – 10.76.243.1410.76.243.15
5010.76.243.16/2810.76.243.17 – 10.76.243.3010.76.243.31
5110.76.243.32/2810.76.243.33 – 10.76.243.4610.76.243.47
5210.76.243.48/2810.76.243.49 – 10.76.243.6210.76.243.63
5310.76.243.64/2810.76.243.65 – 10.76.243.7810.76.243.79
5410.76.243.80/2810.76.243.81 – 10.76.243.9410.76.243.95
5510.76.243.96/2810.76.243.97 – 10.76.243.11010.76.243.111
5610.76.243.112/2810.76.243.113 – 10.76.243.12610.76.243.127
5710.76.243.128/2810.76.243.129 – 10.76.243.14210.76.243.143
5810.76.243.144/2810.76.243.145 – 10.76.243.15810.76.243.159
5910.76.243.160/2810.76.243.161 – 10.76.243.17410.76.243.175
6010.76.243.176/2810.76.243.177 – 10.76.243.19010.76.243.191
6110.76.243.192/2810.76.243.193 – 10.76.243.20610.76.243.207
6210.76.243.208/2810.76.243.209 – 10.76.243.22210.76.243.223
6310.76.243.224/2810.76.243.225 – 10.76.243.23810.76.243.239
6410.76.243.240/2810.76.243.241 – 10.76.243.25410.76.243.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →