ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.76.221.0/24
network10.76.221.0/24
broadcast10.76.221.255
first host10.76.221.1
last host10.76.221.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.221.0/24
address00001010.01001100.11011101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.11011101.00000000
broadcast00001010.01001100.11011101.11111111
green = network part, grey = host part
hex0x0a4cdd00
decimal172809472
reverse dns0.221.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:dd00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.221.0/3010.76.221.1 – 10.76.221.210.76.221.3
210.76.221.4/3010.76.221.5 – 10.76.221.610.76.221.7
310.76.221.8/3010.76.221.9 – 10.76.221.1010.76.221.11
410.76.221.12/3010.76.221.13 – 10.76.221.1410.76.221.15
510.76.221.16/3010.76.221.17 – 10.76.221.1810.76.221.19
610.76.221.20/3010.76.221.21 – 10.76.221.2210.76.221.23
710.76.221.24/3010.76.221.25 – 10.76.221.2610.76.221.27
810.76.221.28/3010.76.221.29 – 10.76.221.3010.76.221.31
910.76.221.32/3010.76.221.33 – 10.76.221.3410.76.221.35
1010.76.221.36/3010.76.221.37 – 10.76.221.3810.76.221.39
1110.76.221.40/3010.76.221.41 – 10.76.221.4210.76.221.43
1210.76.221.44/3010.76.221.45 – 10.76.221.4610.76.221.47
1310.76.221.48/3010.76.221.49 – 10.76.221.5010.76.221.51
1410.76.221.52/3010.76.221.53 – 10.76.221.5410.76.221.55
1510.76.221.56/3010.76.221.57 – 10.76.221.5810.76.221.59
1610.76.221.60/3010.76.221.61 – 10.76.221.6210.76.221.63
1710.76.221.64/3010.76.221.65 – 10.76.221.6610.76.221.67
1810.76.221.68/3010.76.221.69 – 10.76.221.7010.76.221.71
1910.76.221.72/3010.76.221.73 – 10.76.221.7410.76.221.75
2010.76.221.76/3010.76.221.77 – 10.76.221.7810.76.221.79
2110.76.221.80/3010.76.221.81 – 10.76.221.8210.76.221.83
2210.76.221.84/3010.76.221.85 – 10.76.221.8610.76.221.87
2310.76.221.88/3010.76.221.89 – 10.76.221.9010.76.221.91
2410.76.221.92/3010.76.221.93 – 10.76.221.9410.76.221.95
2510.76.221.96/3010.76.221.97 – 10.76.221.9810.76.221.99
2610.76.221.100/3010.76.221.101 – 10.76.221.10210.76.221.103
2710.76.221.104/3010.76.221.105 – 10.76.221.10610.76.221.107
2810.76.221.108/3010.76.221.109 – 10.76.221.11010.76.221.111
2910.76.221.112/3010.76.221.113 – 10.76.221.11410.76.221.115
3010.76.221.116/3010.76.221.117 – 10.76.221.11810.76.221.119
3110.76.221.120/3010.76.221.121 – 10.76.221.12210.76.221.123
3210.76.221.124/3010.76.221.125 – 10.76.221.12610.76.221.127
3310.76.221.128/3010.76.221.129 – 10.76.221.13010.76.221.131
3410.76.221.132/3010.76.221.133 – 10.76.221.13410.76.221.135
3510.76.221.136/3010.76.221.137 – 10.76.221.13810.76.221.139
3610.76.221.140/3010.76.221.141 – 10.76.221.14210.76.221.143
3710.76.221.144/3010.76.221.145 – 10.76.221.14610.76.221.147
3810.76.221.148/3010.76.221.149 – 10.76.221.15010.76.221.151
3910.76.221.152/3010.76.221.153 – 10.76.221.15410.76.221.155
4010.76.221.156/3010.76.221.157 – 10.76.221.15810.76.221.159
4110.76.221.160/3010.76.221.161 – 10.76.221.16210.76.221.163
4210.76.221.164/3010.76.221.165 – 10.76.221.16610.76.221.167
4310.76.221.168/3010.76.221.169 – 10.76.221.17010.76.221.171
4410.76.221.172/3010.76.221.173 – 10.76.221.17410.76.221.175
4510.76.221.176/3010.76.221.177 – 10.76.221.17810.76.221.179
4610.76.221.180/3010.76.221.181 – 10.76.221.18210.76.221.183
4710.76.221.184/3010.76.221.185 – 10.76.221.18610.76.221.187
4810.76.221.188/3010.76.221.189 – 10.76.221.19010.76.221.191
4910.76.221.192/3010.76.221.193 – 10.76.221.19410.76.221.195
5010.76.221.196/3010.76.221.197 – 10.76.221.19810.76.221.199
5110.76.221.200/3010.76.221.201 – 10.76.221.20210.76.221.203
5210.76.221.204/3010.76.221.205 – 10.76.221.20610.76.221.207
5310.76.221.208/3010.76.221.209 – 10.76.221.21010.76.221.211
5410.76.221.212/3010.76.221.213 – 10.76.221.21410.76.221.215
5510.76.221.216/3010.76.221.217 – 10.76.221.21810.76.221.219
5610.76.221.220/3010.76.221.221 – 10.76.221.22210.76.221.223
5710.76.221.224/3010.76.221.225 – 10.76.221.22610.76.221.227
5810.76.221.228/3010.76.221.229 – 10.76.221.23010.76.221.231
5910.76.221.232/3010.76.221.233 – 10.76.221.23410.76.221.235
6010.76.221.236/3010.76.221.237 – 10.76.221.23810.76.221.239
6110.76.221.240/3010.76.221.241 – 10.76.221.24210.76.221.243
6210.76.221.244/3010.76.221.245 – 10.76.221.24610.76.221.247
6310.76.221.248/3010.76.221.249 – 10.76.221.25010.76.221.251
6410.76.221.252/3010.76.221.253 – 10.76.221.25410.76.221.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →