ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.182.64/26
network10.76.182.64/26
broadcast10.76.182.127
first host10.76.182.65
last host10.76.182.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.76.182.64/26
address00001010.01001100.10110110.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001100.10110110.01000000
broadcast00001010.01001100.10110110.01111111
green = network part, grey = host part
hex0x0a4cb640
decimal172799552
reverse dns64.182.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:b640

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.76.182.64/3110.76.182.64 – 10.76.182.6510.76.182.65
210.76.182.66/3110.76.182.66 – 10.76.182.6710.76.182.67
310.76.182.68/3110.76.182.68 – 10.76.182.6910.76.182.69
410.76.182.70/3110.76.182.70 – 10.76.182.7110.76.182.71
510.76.182.72/3110.76.182.72 – 10.76.182.7310.76.182.73
610.76.182.74/3110.76.182.74 – 10.76.182.7510.76.182.75
710.76.182.76/3110.76.182.76 – 10.76.182.7710.76.182.77
810.76.182.78/3110.76.182.78 – 10.76.182.7910.76.182.79
910.76.182.80/3110.76.182.80 – 10.76.182.8110.76.182.81
1010.76.182.82/3110.76.182.82 – 10.76.182.8310.76.182.83
1110.76.182.84/3110.76.182.84 – 10.76.182.8510.76.182.85
1210.76.182.86/3110.76.182.86 – 10.76.182.8710.76.182.87
1310.76.182.88/3110.76.182.88 – 10.76.182.8910.76.182.89
1410.76.182.90/3110.76.182.90 – 10.76.182.9110.76.182.91
1510.76.182.92/3110.76.182.92 – 10.76.182.9310.76.182.93
1610.76.182.94/3110.76.182.94 – 10.76.182.9510.76.182.95
1710.76.182.96/3110.76.182.96 – 10.76.182.9710.76.182.97
1810.76.182.98/3110.76.182.98 – 10.76.182.9910.76.182.99
1910.76.182.100/3110.76.182.100 – 10.76.182.10110.76.182.101
2010.76.182.102/3110.76.182.102 – 10.76.182.10310.76.182.103
2110.76.182.104/3110.76.182.104 – 10.76.182.10510.76.182.105
2210.76.182.106/3110.76.182.106 – 10.76.182.10710.76.182.107
2310.76.182.108/3110.76.182.108 – 10.76.182.10910.76.182.109
2410.76.182.110/3110.76.182.110 – 10.76.182.11110.76.182.111
2510.76.182.112/3110.76.182.112 – 10.76.182.11310.76.182.113
2610.76.182.114/3110.76.182.114 – 10.76.182.11510.76.182.115
2710.76.182.116/3110.76.182.116 – 10.76.182.11710.76.182.117
2810.76.182.118/3110.76.182.118 – 10.76.182.11910.76.182.119
2910.76.182.120/3110.76.182.120 – 10.76.182.12110.76.182.121
3010.76.182.122/3110.76.182.122 – 10.76.182.12310.76.182.123
3110.76.182.124/3110.76.182.124 – 10.76.182.12510.76.182.125
3210.76.182.126/3110.76.182.126 – 10.76.182.12710.76.182.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →