ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.176.0/24
network10.76.176.0/24
broadcast10.76.176.255
first host10.76.176.1
last host10.76.176.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.176.0/24
address00001010.01001100.10110000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.10110000.00000000
broadcast00001010.01001100.10110000.11111111
green = network part, grey = host part
hex0x0a4cb000
decimal172797952
reverse dns0.176.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:b000

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.176.0/3010.76.176.1 – 10.76.176.210.76.176.3
210.76.176.4/3010.76.176.5 – 10.76.176.610.76.176.7
310.76.176.8/3010.76.176.9 – 10.76.176.1010.76.176.11
410.76.176.12/3010.76.176.13 – 10.76.176.1410.76.176.15
510.76.176.16/3010.76.176.17 – 10.76.176.1810.76.176.19
610.76.176.20/3010.76.176.21 – 10.76.176.2210.76.176.23
710.76.176.24/3010.76.176.25 – 10.76.176.2610.76.176.27
810.76.176.28/3010.76.176.29 – 10.76.176.3010.76.176.31
910.76.176.32/3010.76.176.33 – 10.76.176.3410.76.176.35
1010.76.176.36/3010.76.176.37 – 10.76.176.3810.76.176.39
1110.76.176.40/3010.76.176.41 – 10.76.176.4210.76.176.43
1210.76.176.44/3010.76.176.45 – 10.76.176.4610.76.176.47
1310.76.176.48/3010.76.176.49 – 10.76.176.5010.76.176.51
1410.76.176.52/3010.76.176.53 – 10.76.176.5410.76.176.55
1510.76.176.56/3010.76.176.57 – 10.76.176.5810.76.176.59
1610.76.176.60/3010.76.176.61 – 10.76.176.6210.76.176.63
1710.76.176.64/3010.76.176.65 – 10.76.176.6610.76.176.67
1810.76.176.68/3010.76.176.69 – 10.76.176.7010.76.176.71
1910.76.176.72/3010.76.176.73 – 10.76.176.7410.76.176.75
2010.76.176.76/3010.76.176.77 – 10.76.176.7810.76.176.79
2110.76.176.80/3010.76.176.81 – 10.76.176.8210.76.176.83
2210.76.176.84/3010.76.176.85 – 10.76.176.8610.76.176.87
2310.76.176.88/3010.76.176.89 – 10.76.176.9010.76.176.91
2410.76.176.92/3010.76.176.93 – 10.76.176.9410.76.176.95
2510.76.176.96/3010.76.176.97 – 10.76.176.9810.76.176.99
2610.76.176.100/3010.76.176.101 – 10.76.176.10210.76.176.103
2710.76.176.104/3010.76.176.105 – 10.76.176.10610.76.176.107
2810.76.176.108/3010.76.176.109 – 10.76.176.11010.76.176.111
2910.76.176.112/3010.76.176.113 – 10.76.176.11410.76.176.115
3010.76.176.116/3010.76.176.117 – 10.76.176.11810.76.176.119
3110.76.176.120/3010.76.176.121 – 10.76.176.12210.76.176.123
3210.76.176.124/3010.76.176.125 – 10.76.176.12610.76.176.127
3310.76.176.128/3010.76.176.129 – 10.76.176.13010.76.176.131
3410.76.176.132/3010.76.176.133 – 10.76.176.13410.76.176.135
3510.76.176.136/3010.76.176.137 – 10.76.176.13810.76.176.139
3610.76.176.140/3010.76.176.141 – 10.76.176.14210.76.176.143
3710.76.176.144/3010.76.176.145 – 10.76.176.14610.76.176.147
3810.76.176.148/3010.76.176.149 – 10.76.176.15010.76.176.151
3910.76.176.152/3010.76.176.153 – 10.76.176.15410.76.176.155
4010.76.176.156/3010.76.176.157 – 10.76.176.15810.76.176.159
4110.76.176.160/3010.76.176.161 – 10.76.176.16210.76.176.163
4210.76.176.164/3010.76.176.165 – 10.76.176.16610.76.176.167
4310.76.176.168/3010.76.176.169 – 10.76.176.17010.76.176.171
4410.76.176.172/3010.76.176.173 – 10.76.176.17410.76.176.175
4510.76.176.176/3010.76.176.177 – 10.76.176.17810.76.176.179
4610.76.176.180/3010.76.176.181 – 10.76.176.18210.76.176.183
4710.76.176.184/3010.76.176.185 – 10.76.176.18610.76.176.187
4810.76.176.188/3010.76.176.189 – 10.76.176.19010.76.176.191
4910.76.176.192/3010.76.176.193 – 10.76.176.19410.76.176.195
5010.76.176.196/3010.76.176.197 – 10.76.176.19810.76.176.199
5110.76.176.200/3010.76.176.201 – 10.76.176.20210.76.176.203
5210.76.176.204/3010.76.176.205 – 10.76.176.20610.76.176.207
5310.76.176.208/3010.76.176.209 – 10.76.176.21010.76.176.211
5410.76.176.212/3010.76.176.213 – 10.76.176.21410.76.176.215
5510.76.176.216/3010.76.176.217 – 10.76.176.21810.76.176.219
5610.76.176.220/3010.76.176.221 – 10.76.176.22210.76.176.223
5710.76.176.224/3010.76.176.225 – 10.76.176.22610.76.176.227
5810.76.176.228/3010.76.176.229 – 10.76.176.23010.76.176.231
5910.76.176.232/3010.76.176.233 – 10.76.176.23410.76.176.235
6010.76.176.236/3010.76.176.237 – 10.76.176.23810.76.176.239
6110.76.176.240/3010.76.176.241 – 10.76.176.24210.76.176.243
6210.76.176.244/3010.76.176.245 – 10.76.176.24610.76.176.247
6310.76.176.248/3010.76.176.249 – 10.76.176.25010.76.176.251
6410.76.176.252/3010.76.176.253 – 10.76.176.25410.76.176.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →