ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.169.0/24
network10.76.169.0/24
broadcast10.76.169.255
first host10.76.169.1
last host10.76.169.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.169.0/24
address00001010.01001100.10101001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.10101001.00000000
broadcast00001010.01001100.10101001.11111111
green = network part, grey = host part
hex0x0a4ca900
decimal172796160
reverse dns0.169.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:a900

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.169.0/3010.76.169.1 – 10.76.169.210.76.169.3
210.76.169.4/3010.76.169.5 – 10.76.169.610.76.169.7
310.76.169.8/3010.76.169.9 – 10.76.169.1010.76.169.11
410.76.169.12/3010.76.169.13 – 10.76.169.1410.76.169.15
510.76.169.16/3010.76.169.17 – 10.76.169.1810.76.169.19
610.76.169.20/3010.76.169.21 – 10.76.169.2210.76.169.23
710.76.169.24/3010.76.169.25 – 10.76.169.2610.76.169.27
810.76.169.28/3010.76.169.29 – 10.76.169.3010.76.169.31
910.76.169.32/3010.76.169.33 – 10.76.169.3410.76.169.35
1010.76.169.36/3010.76.169.37 – 10.76.169.3810.76.169.39
1110.76.169.40/3010.76.169.41 – 10.76.169.4210.76.169.43
1210.76.169.44/3010.76.169.45 – 10.76.169.4610.76.169.47
1310.76.169.48/3010.76.169.49 – 10.76.169.5010.76.169.51
1410.76.169.52/3010.76.169.53 – 10.76.169.5410.76.169.55
1510.76.169.56/3010.76.169.57 – 10.76.169.5810.76.169.59
1610.76.169.60/3010.76.169.61 – 10.76.169.6210.76.169.63
1710.76.169.64/3010.76.169.65 – 10.76.169.6610.76.169.67
1810.76.169.68/3010.76.169.69 – 10.76.169.7010.76.169.71
1910.76.169.72/3010.76.169.73 – 10.76.169.7410.76.169.75
2010.76.169.76/3010.76.169.77 – 10.76.169.7810.76.169.79
2110.76.169.80/3010.76.169.81 – 10.76.169.8210.76.169.83
2210.76.169.84/3010.76.169.85 – 10.76.169.8610.76.169.87
2310.76.169.88/3010.76.169.89 – 10.76.169.9010.76.169.91
2410.76.169.92/3010.76.169.93 – 10.76.169.9410.76.169.95
2510.76.169.96/3010.76.169.97 – 10.76.169.9810.76.169.99
2610.76.169.100/3010.76.169.101 – 10.76.169.10210.76.169.103
2710.76.169.104/3010.76.169.105 – 10.76.169.10610.76.169.107
2810.76.169.108/3010.76.169.109 – 10.76.169.11010.76.169.111
2910.76.169.112/3010.76.169.113 – 10.76.169.11410.76.169.115
3010.76.169.116/3010.76.169.117 – 10.76.169.11810.76.169.119
3110.76.169.120/3010.76.169.121 – 10.76.169.12210.76.169.123
3210.76.169.124/3010.76.169.125 – 10.76.169.12610.76.169.127
3310.76.169.128/3010.76.169.129 – 10.76.169.13010.76.169.131
3410.76.169.132/3010.76.169.133 – 10.76.169.13410.76.169.135
3510.76.169.136/3010.76.169.137 – 10.76.169.13810.76.169.139
3610.76.169.140/3010.76.169.141 – 10.76.169.14210.76.169.143
3710.76.169.144/3010.76.169.145 – 10.76.169.14610.76.169.147
3810.76.169.148/3010.76.169.149 – 10.76.169.15010.76.169.151
3910.76.169.152/3010.76.169.153 – 10.76.169.15410.76.169.155
4010.76.169.156/3010.76.169.157 – 10.76.169.15810.76.169.159
4110.76.169.160/3010.76.169.161 – 10.76.169.16210.76.169.163
4210.76.169.164/3010.76.169.165 – 10.76.169.16610.76.169.167
4310.76.169.168/3010.76.169.169 – 10.76.169.17010.76.169.171
4410.76.169.172/3010.76.169.173 – 10.76.169.17410.76.169.175
4510.76.169.176/3010.76.169.177 – 10.76.169.17810.76.169.179
4610.76.169.180/3010.76.169.181 – 10.76.169.18210.76.169.183
4710.76.169.184/3010.76.169.185 – 10.76.169.18610.76.169.187
4810.76.169.188/3010.76.169.189 – 10.76.169.19010.76.169.191
4910.76.169.192/3010.76.169.193 – 10.76.169.19410.76.169.195
5010.76.169.196/3010.76.169.197 – 10.76.169.19810.76.169.199
5110.76.169.200/3010.76.169.201 – 10.76.169.20210.76.169.203
5210.76.169.204/3010.76.169.205 – 10.76.169.20610.76.169.207
5310.76.169.208/3010.76.169.209 – 10.76.169.21010.76.169.211
5410.76.169.212/3010.76.169.213 – 10.76.169.21410.76.169.215
5510.76.169.216/3010.76.169.217 – 10.76.169.21810.76.169.219
5610.76.169.220/3010.76.169.221 – 10.76.169.22210.76.169.223
5710.76.169.224/3010.76.169.225 – 10.76.169.22610.76.169.227
5810.76.169.228/3010.76.169.229 – 10.76.169.23010.76.169.231
5910.76.169.232/3010.76.169.233 – 10.76.169.23410.76.169.235
6010.76.169.236/3010.76.169.237 – 10.76.169.23810.76.169.239
6110.76.169.240/3010.76.169.241 – 10.76.169.24210.76.169.243
6210.76.169.244/3010.76.169.245 – 10.76.169.24610.76.169.247
6310.76.169.248/3010.76.169.249 – 10.76.169.25010.76.169.251
6410.76.169.252/3010.76.169.253 – 10.76.169.25410.76.169.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →