IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.76.161.0/26

network10.76.161.0/26

broadcast10.76.161.63

first host10.76.161.1

last host10.76.161.62

subnet mask255.255.255.192

wildcard0.0.0.63

addresses64

usable hosts62

classA

ipcalc 10.76.161.0/26

address00001010.01001100.10100001.00000000

subnet mask11111111.11111111.11111111.11000000

network00001010.01001100.10100001.00000000

broadcast00001010.01001100.10100001.00111111

green = network part, grey = host part

hex0x0a4ca100

decimal172794112

reverse dns0.161.76.10.in-addr.arpa

ipv4-mapped::ffff:a4c:a100

/26 split into /32 · 64 subnets

close ×

#	network	host range	broadcast
1	10.76.161.0/32	10.76.161.0 – 10.76.161.0	10.76.161.0
2	10.76.161.1/32	10.76.161.1 – 10.76.161.1	10.76.161.1
3	10.76.161.2/32	10.76.161.2 – 10.76.161.2	10.76.161.2
4	10.76.161.3/32	10.76.161.3 – 10.76.161.3	10.76.161.3
5	10.76.161.4/32	10.76.161.4 – 10.76.161.4	10.76.161.4
6	10.76.161.5/32	10.76.161.5 – 10.76.161.5	10.76.161.5
7	10.76.161.6/32	10.76.161.6 – 10.76.161.6	10.76.161.6
8	10.76.161.7/32	10.76.161.7 – 10.76.161.7	10.76.161.7
9	10.76.161.8/32	10.76.161.8 – 10.76.161.8	10.76.161.8
10	10.76.161.9/32	10.76.161.9 – 10.76.161.9	10.76.161.9
11	10.76.161.10/32	10.76.161.10 – 10.76.161.10	10.76.161.10
12	10.76.161.11/32	10.76.161.11 – 10.76.161.11	10.76.161.11
13	10.76.161.12/32	10.76.161.12 – 10.76.161.12	10.76.161.12
14	10.76.161.13/32	10.76.161.13 – 10.76.161.13	10.76.161.13
15	10.76.161.14/32	10.76.161.14 – 10.76.161.14	10.76.161.14
16	10.76.161.15/32	10.76.161.15 – 10.76.161.15	10.76.161.15
17	10.76.161.16/32	10.76.161.16 – 10.76.161.16	10.76.161.16
18	10.76.161.17/32	10.76.161.17 – 10.76.161.17	10.76.161.17
19	10.76.161.18/32	10.76.161.18 – 10.76.161.18	10.76.161.18
20	10.76.161.19/32	10.76.161.19 – 10.76.161.19	10.76.161.19
21	10.76.161.20/32	10.76.161.20 – 10.76.161.20	10.76.161.20
22	10.76.161.21/32	10.76.161.21 – 10.76.161.21	10.76.161.21
23	10.76.161.22/32	10.76.161.22 – 10.76.161.22	10.76.161.22
24	10.76.161.23/32	10.76.161.23 – 10.76.161.23	10.76.161.23
25	10.76.161.24/32	10.76.161.24 – 10.76.161.24	10.76.161.24
26	10.76.161.25/32	10.76.161.25 – 10.76.161.25	10.76.161.25
27	10.76.161.26/32	10.76.161.26 – 10.76.161.26	10.76.161.26
28	10.76.161.27/32	10.76.161.27 – 10.76.161.27	10.76.161.27
29	10.76.161.28/32	10.76.161.28 – 10.76.161.28	10.76.161.28
30	10.76.161.29/32	10.76.161.29 – 10.76.161.29	10.76.161.29
31	10.76.161.30/32	10.76.161.30 – 10.76.161.30	10.76.161.30
32	10.76.161.31/32	10.76.161.31 – 10.76.161.31	10.76.161.31
33	10.76.161.32/32	10.76.161.32 – 10.76.161.32	10.76.161.32
34	10.76.161.33/32	10.76.161.33 – 10.76.161.33	10.76.161.33
35	10.76.161.34/32	10.76.161.34 – 10.76.161.34	10.76.161.34
36	10.76.161.35/32	10.76.161.35 – 10.76.161.35	10.76.161.35
37	10.76.161.36/32	10.76.161.36 – 10.76.161.36	10.76.161.36
38	10.76.161.37/32	10.76.161.37 – 10.76.161.37	10.76.161.37
39	10.76.161.38/32	10.76.161.38 – 10.76.161.38	10.76.161.38
40	10.76.161.39/32	10.76.161.39 – 10.76.161.39	10.76.161.39
41	10.76.161.40/32	10.76.161.40 – 10.76.161.40	10.76.161.40
42	10.76.161.41/32	10.76.161.41 – 10.76.161.41	10.76.161.41
43	10.76.161.42/32	10.76.161.42 – 10.76.161.42	10.76.161.42
44	10.76.161.43/32	10.76.161.43 – 10.76.161.43	10.76.161.43
45	10.76.161.44/32	10.76.161.44 – 10.76.161.44	10.76.161.44
46	10.76.161.45/32	10.76.161.45 – 10.76.161.45	10.76.161.45
47	10.76.161.46/32	10.76.161.46 – 10.76.161.46	10.76.161.46
48	10.76.161.47/32	10.76.161.47 – 10.76.161.47	10.76.161.47
49	10.76.161.48/32	10.76.161.48 – 10.76.161.48	10.76.161.48
50	10.76.161.49/32	10.76.161.49 – 10.76.161.49	10.76.161.49
51	10.76.161.50/32	10.76.161.50 – 10.76.161.50	10.76.161.50
52	10.76.161.51/32	10.76.161.51 – 10.76.161.51	10.76.161.51
53	10.76.161.52/32	10.76.161.52 – 10.76.161.52	10.76.161.52
54	10.76.161.53/32	10.76.161.53 – 10.76.161.53	10.76.161.53
55	10.76.161.54/32	10.76.161.54 – 10.76.161.54	10.76.161.54
56	10.76.161.55/32	10.76.161.55 – 10.76.161.55	10.76.161.55
57	10.76.161.56/32	10.76.161.56 – 10.76.161.56	10.76.161.56
58	10.76.161.57/32	10.76.161.57 – 10.76.161.57	10.76.161.57
59	10.76.161.58/32	10.76.161.58 – 10.76.161.58	10.76.161.58
60	10.76.161.59/32	10.76.161.59 – 10.76.161.59	10.76.161.59
61	10.76.161.60/32	10.76.161.60 – 10.76.161.60	10.76.161.60
62	10.76.161.61/32	10.76.161.61 – 10.76.161.61	10.76.161.61
63	10.76.161.62/32	10.76.161.62 – 10.76.161.62	10.76.161.62
64	10.76.161.63/32	10.76.161.63 – 10.76.161.63	10.76.161.63

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /26
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	-
/25	255.255.255.128	128	126	-
/26	255.255.255.192	64	62	1
/27	255.255.255.224	32	30	2 split →
/28	255.255.255.240	16	14	4 split →
/29	255.255.255.248	8	6	8 split →
/30	255.255.255.252	4	2	16 split →
/31	255.255.255.254	2	2	32 split →
/32	255.255.255.255	1	1	64 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →