ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.76.141.0/24
network10.76.141.0/24
broadcast10.76.141.255
first host10.76.141.1
last host10.76.141.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.76.141.0/24
address00001010.01001100.10001101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001100.10001101.00000000
broadcast00001010.01001100.10001101.11111111
green = network part, grey = host part
hex0x0a4c8d00
decimal172788992
reverse dns0.141.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:8d00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.76.141.0/3010.76.141.1 – 10.76.141.210.76.141.3
210.76.141.4/3010.76.141.5 – 10.76.141.610.76.141.7
310.76.141.8/3010.76.141.9 – 10.76.141.1010.76.141.11
410.76.141.12/3010.76.141.13 – 10.76.141.1410.76.141.15
510.76.141.16/3010.76.141.17 – 10.76.141.1810.76.141.19
610.76.141.20/3010.76.141.21 – 10.76.141.2210.76.141.23
710.76.141.24/3010.76.141.25 – 10.76.141.2610.76.141.27
810.76.141.28/3010.76.141.29 – 10.76.141.3010.76.141.31
910.76.141.32/3010.76.141.33 – 10.76.141.3410.76.141.35
1010.76.141.36/3010.76.141.37 – 10.76.141.3810.76.141.39
1110.76.141.40/3010.76.141.41 – 10.76.141.4210.76.141.43
1210.76.141.44/3010.76.141.45 – 10.76.141.4610.76.141.47
1310.76.141.48/3010.76.141.49 – 10.76.141.5010.76.141.51
1410.76.141.52/3010.76.141.53 – 10.76.141.5410.76.141.55
1510.76.141.56/3010.76.141.57 – 10.76.141.5810.76.141.59
1610.76.141.60/3010.76.141.61 – 10.76.141.6210.76.141.63
1710.76.141.64/3010.76.141.65 – 10.76.141.6610.76.141.67
1810.76.141.68/3010.76.141.69 – 10.76.141.7010.76.141.71
1910.76.141.72/3010.76.141.73 – 10.76.141.7410.76.141.75
2010.76.141.76/3010.76.141.77 – 10.76.141.7810.76.141.79
2110.76.141.80/3010.76.141.81 – 10.76.141.8210.76.141.83
2210.76.141.84/3010.76.141.85 – 10.76.141.8610.76.141.87
2310.76.141.88/3010.76.141.89 – 10.76.141.9010.76.141.91
2410.76.141.92/3010.76.141.93 – 10.76.141.9410.76.141.95
2510.76.141.96/3010.76.141.97 – 10.76.141.9810.76.141.99
2610.76.141.100/3010.76.141.101 – 10.76.141.10210.76.141.103
2710.76.141.104/3010.76.141.105 – 10.76.141.10610.76.141.107
2810.76.141.108/3010.76.141.109 – 10.76.141.11010.76.141.111
2910.76.141.112/3010.76.141.113 – 10.76.141.11410.76.141.115
3010.76.141.116/3010.76.141.117 – 10.76.141.11810.76.141.119
3110.76.141.120/3010.76.141.121 – 10.76.141.12210.76.141.123
3210.76.141.124/3010.76.141.125 – 10.76.141.12610.76.141.127
3310.76.141.128/3010.76.141.129 – 10.76.141.13010.76.141.131
3410.76.141.132/3010.76.141.133 – 10.76.141.13410.76.141.135
3510.76.141.136/3010.76.141.137 – 10.76.141.13810.76.141.139
3610.76.141.140/3010.76.141.141 – 10.76.141.14210.76.141.143
3710.76.141.144/3010.76.141.145 – 10.76.141.14610.76.141.147
3810.76.141.148/3010.76.141.149 – 10.76.141.15010.76.141.151
3910.76.141.152/3010.76.141.153 – 10.76.141.15410.76.141.155
4010.76.141.156/3010.76.141.157 – 10.76.141.15810.76.141.159
4110.76.141.160/3010.76.141.161 – 10.76.141.16210.76.141.163
4210.76.141.164/3010.76.141.165 – 10.76.141.16610.76.141.167
4310.76.141.168/3010.76.141.169 – 10.76.141.17010.76.141.171
4410.76.141.172/3010.76.141.173 – 10.76.141.17410.76.141.175
4510.76.141.176/3010.76.141.177 – 10.76.141.17810.76.141.179
4610.76.141.180/3010.76.141.181 – 10.76.141.18210.76.141.183
4710.76.141.184/3010.76.141.185 – 10.76.141.18610.76.141.187
4810.76.141.188/3010.76.141.189 – 10.76.141.19010.76.141.191
4910.76.141.192/3010.76.141.193 – 10.76.141.19410.76.141.195
5010.76.141.196/3010.76.141.197 – 10.76.141.19810.76.141.199
5110.76.141.200/3010.76.141.201 – 10.76.141.20210.76.141.203
5210.76.141.204/3010.76.141.205 – 10.76.141.20610.76.141.207
5310.76.141.208/3010.76.141.209 – 10.76.141.21010.76.141.211
5410.76.141.212/3010.76.141.213 – 10.76.141.21410.76.141.215
5510.76.141.216/3010.76.141.217 – 10.76.141.21810.76.141.219
5610.76.141.220/3010.76.141.221 – 10.76.141.22210.76.141.223
5710.76.141.224/3010.76.141.225 – 10.76.141.22610.76.141.227
5810.76.141.228/3010.76.141.229 – 10.76.141.23010.76.141.231
5910.76.141.232/3010.76.141.233 – 10.76.141.23410.76.141.235
6010.76.141.236/3010.76.141.237 – 10.76.141.23810.76.141.239
6110.76.141.240/3010.76.141.241 – 10.76.141.24210.76.141.243
6210.76.141.244/3010.76.141.245 – 10.76.141.24610.76.141.247
6310.76.141.248/3010.76.141.249 – 10.76.141.25010.76.141.251
6410.76.141.252/3010.76.141.253 – 10.76.141.25410.76.141.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →