ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.76.12.0/23
network10.76.12.0/23
broadcast10.76.13.255
first host10.76.12.1
last host10.76.13.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.76.12.0/23
address00001010.01001100.00001100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.01001100.00001100.00000000
broadcast00001010.01001100.00001101.11111111
green = network part, grey = host part
hex0x0a4c0c00
decimal172755968
reverse dns0.12.76.10.in-addr.arpa
ipv4-mapped::ffff:a4c:c00

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.76.12.0/2810.76.12.1 – 10.76.12.1410.76.12.15
210.76.12.16/2810.76.12.17 – 10.76.12.3010.76.12.31
310.76.12.32/2810.76.12.33 – 10.76.12.4610.76.12.47
410.76.12.48/2810.76.12.49 – 10.76.12.6210.76.12.63
510.76.12.64/2810.76.12.65 – 10.76.12.7810.76.12.79
610.76.12.80/2810.76.12.81 – 10.76.12.9410.76.12.95
710.76.12.96/2810.76.12.97 – 10.76.12.11010.76.12.111
810.76.12.112/2810.76.12.113 – 10.76.12.12610.76.12.127
910.76.12.128/2810.76.12.129 – 10.76.12.14210.76.12.143
1010.76.12.144/2810.76.12.145 – 10.76.12.15810.76.12.159
1110.76.12.160/2810.76.12.161 – 10.76.12.17410.76.12.175
1210.76.12.176/2810.76.12.177 – 10.76.12.19010.76.12.191
1310.76.12.192/2810.76.12.193 – 10.76.12.20610.76.12.207
1410.76.12.208/2810.76.12.209 – 10.76.12.22210.76.12.223
1510.76.12.224/2810.76.12.225 – 10.76.12.23810.76.12.239
1610.76.12.240/2810.76.12.241 – 10.76.12.25410.76.12.255
1710.76.13.0/2810.76.13.1 – 10.76.13.1410.76.13.15
1810.76.13.16/2810.76.13.17 – 10.76.13.3010.76.13.31
1910.76.13.32/2810.76.13.33 – 10.76.13.4610.76.13.47
2010.76.13.48/2810.76.13.49 – 10.76.13.6210.76.13.63
2110.76.13.64/2810.76.13.65 – 10.76.13.7810.76.13.79
2210.76.13.80/2810.76.13.81 – 10.76.13.9410.76.13.95
2310.76.13.96/2810.76.13.97 – 10.76.13.11010.76.13.111
2410.76.13.112/2810.76.13.113 – 10.76.13.12610.76.13.127
2510.76.13.128/2810.76.13.129 – 10.76.13.14210.76.13.143
2610.76.13.144/2810.76.13.145 – 10.76.13.15810.76.13.159
2710.76.13.160/2810.76.13.161 – 10.76.13.17410.76.13.175
2810.76.13.176/2810.76.13.177 – 10.76.13.19010.76.13.191
2910.76.13.192/2810.76.13.193 – 10.76.13.20610.76.13.207
3010.76.13.208/2810.76.13.209 – 10.76.13.22210.76.13.223
3110.76.13.224/2810.76.13.225 – 10.76.13.23810.76.13.239
3210.76.13.240/2810.76.13.241 – 10.76.13.25410.76.13.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →