ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.74.76.64/28
network10.74.76.64/28
broadcast10.74.76.79
first host10.74.76.65
last host10.74.76.78
subnet mask255.255.255.240
wildcard0.0.0.15
addresses16
usable hosts14
classA
ipcalc 10.74.76.64/28
address00001010.01001010.01001100.01000000
subnet mask11111111.11111111.11111111.11110000
network00001010.01001010.01001100.01000000
broadcast00001010.01001010.01001100.01001111
green = network part, grey = host part
hex0x0a4a4c40
decimal172641344
reverse dns64.76.74.10.in-addr.arpa
ipv4-mapped::ffff:a4a:4c40

/28 split into /32 · 16 subnets

close ×
#networkhost rangebroadcast
110.74.76.64/3210.74.76.64 – 10.74.76.6410.74.76.64
210.74.76.65/3210.74.76.65 – 10.74.76.6510.74.76.65
310.74.76.66/3210.74.76.66 – 10.74.76.6610.74.76.66
410.74.76.67/3210.74.76.67 – 10.74.76.6710.74.76.67
510.74.76.68/3210.74.76.68 – 10.74.76.6810.74.76.68
610.74.76.69/3210.74.76.69 – 10.74.76.6910.74.76.69
710.74.76.70/3210.74.76.70 – 10.74.76.7010.74.76.70
810.74.76.71/3210.74.76.71 – 10.74.76.7110.74.76.71
910.74.76.72/3210.74.76.72 – 10.74.76.7210.74.76.72
1010.74.76.73/3210.74.76.73 – 10.74.76.7310.74.76.73
1110.74.76.74/3210.74.76.74 – 10.74.76.7410.74.76.74
1210.74.76.75/3210.74.76.75 – 10.74.76.7510.74.76.75
1310.74.76.76/3210.74.76.76 – 10.74.76.7610.74.76.76
1410.74.76.77/3210.74.76.77 – 10.74.76.7710.74.76.77
1510.74.76.78/3210.74.76.78 – 10.74.76.7810.74.76.78
1610.74.76.79/3210.74.76.79 – 10.74.76.7910.74.76.79
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /28
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.2243230-
/28255.255.255.24016141
/29255.255.255.248862 split →
/30255.255.255.252424 split →
/31255.255.255.254228 split →
/32255.255.255.2551116 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →