ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.72.149.64/26
network10.72.149.64/26
broadcast10.72.149.127
first host10.72.149.65
last host10.72.149.126
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.72.149.64/26
address00001010.01001000.10010101.01000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01001000.10010101.01000000
broadcast00001010.01001000.10010101.01111111
green = network part, grey = host part
hex0x0a489540
decimal172528960
reverse dns64.149.72.10.in-addr.arpa
ipv4-mapped::ffff:a48:9540

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.72.149.64/3110.72.149.64 – 10.72.149.6510.72.149.65
210.72.149.66/3110.72.149.66 – 10.72.149.6710.72.149.67
310.72.149.68/3110.72.149.68 – 10.72.149.6910.72.149.69
410.72.149.70/3110.72.149.70 – 10.72.149.7110.72.149.71
510.72.149.72/3110.72.149.72 – 10.72.149.7310.72.149.73
610.72.149.74/3110.72.149.74 – 10.72.149.7510.72.149.75
710.72.149.76/3110.72.149.76 – 10.72.149.7710.72.149.77
810.72.149.78/3110.72.149.78 – 10.72.149.7910.72.149.79
910.72.149.80/3110.72.149.80 – 10.72.149.8110.72.149.81
1010.72.149.82/3110.72.149.82 – 10.72.149.8310.72.149.83
1110.72.149.84/3110.72.149.84 – 10.72.149.8510.72.149.85
1210.72.149.86/3110.72.149.86 – 10.72.149.8710.72.149.87
1310.72.149.88/3110.72.149.88 – 10.72.149.8910.72.149.89
1410.72.149.90/3110.72.149.90 – 10.72.149.9110.72.149.91
1510.72.149.92/3110.72.149.92 – 10.72.149.9310.72.149.93
1610.72.149.94/3110.72.149.94 – 10.72.149.9510.72.149.95
1710.72.149.96/3110.72.149.96 – 10.72.149.9710.72.149.97
1810.72.149.98/3110.72.149.98 – 10.72.149.9910.72.149.99
1910.72.149.100/3110.72.149.100 – 10.72.149.10110.72.149.101
2010.72.149.102/3110.72.149.102 – 10.72.149.10310.72.149.103
2110.72.149.104/3110.72.149.104 – 10.72.149.10510.72.149.105
2210.72.149.106/3110.72.149.106 – 10.72.149.10710.72.149.107
2310.72.149.108/3110.72.149.108 – 10.72.149.10910.72.149.109
2410.72.149.110/3110.72.149.110 – 10.72.149.11110.72.149.111
2510.72.149.112/3110.72.149.112 – 10.72.149.11310.72.149.113
2610.72.149.114/3110.72.149.114 – 10.72.149.11510.72.149.115
2710.72.149.116/3110.72.149.116 – 10.72.149.11710.72.149.117
2810.72.149.118/3110.72.149.118 – 10.72.149.11910.72.149.119
2910.72.149.120/3110.72.149.120 – 10.72.149.12110.72.149.121
3010.72.149.122/3110.72.149.122 – 10.72.149.12310.72.149.123
3110.72.149.124/3110.72.149.124 – 10.72.149.12510.72.149.125
3210.72.149.126/3110.72.149.126 – 10.72.149.12710.72.149.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →