ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.72.149.0/24
network10.72.149.0/24
broadcast10.72.149.255
first host10.72.149.1
last host10.72.149.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.72.149.0/24
address00001010.01001000.10010101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01001000.10010101.00000000
broadcast00001010.01001000.10010101.11111111
green = network part, grey = host part
hex0x0a489500
decimal172528896
reverse dns0.149.72.10.in-addr.arpa
ipv4-mapped::ffff:a48:9500

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.72.149.0/3010.72.149.1 – 10.72.149.210.72.149.3
210.72.149.4/3010.72.149.5 – 10.72.149.610.72.149.7
310.72.149.8/3010.72.149.9 – 10.72.149.1010.72.149.11
410.72.149.12/3010.72.149.13 – 10.72.149.1410.72.149.15
510.72.149.16/3010.72.149.17 – 10.72.149.1810.72.149.19
610.72.149.20/3010.72.149.21 – 10.72.149.2210.72.149.23
710.72.149.24/3010.72.149.25 – 10.72.149.2610.72.149.27
810.72.149.28/3010.72.149.29 – 10.72.149.3010.72.149.31
910.72.149.32/3010.72.149.33 – 10.72.149.3410.72.149.35
1010.72.149.36/3010.72.149.37 – 10.72.149.3810.72.149.39
1110.72.149.40/3010.72.149.41 – 10.72.149.4210.72.149.43
1210.72.149.44/3010.72.149.45 – 10.72.149.4610.72.149.47
1310.72.149.48/3010.72.149.49 – 10.72.149.5010.72.149.51
1410.72.149.52/3010.72.149.53 – 10.72.149.5410.72.149.55
1510.72.149.56/3010.72.149.57 – 10.72.149.5810.72.149.59
1610.72.149.60/3010.72.149.61 – 10.72.149.6210.72.149.63
1710.72.149.64/3010.72.149.65 – 10.72.149.6610.72.149.67
1810.72.149.68/3010.72.149.69 – 10.72.149.7010.72.149.71
1910.72.149.72/3010.72.149.73 – 10.72.149.7410.72.149.75
2010.72.149.76/3010.72.149.77 – 10.72.149.7810.72.149.79
2110.72.149.80/3010.72.149.81 – 10.72.149.8210.72.149.83
2210.72.149.84/3010.72.149.85 – 10.72.149.8610.72.149.87
2310.72.149.88/3010.72.149.89 – 10.72.149.9010.72.149.91
2410.72.149.92/3010.72.149.93 – 10.72.149.9410.72.149.95
2510.72.149.96/3010.72.149.97 – 10.72.149.9810.72.149.99
2610.72.149.100/3010.72.149.101 – 10.72.149.10210.72.149.103
2710.72.149.104/3010.72.149.105 – 10.72.149.10610.72.149.107
2810.72.149.108/3010.72.149.109 – 10.72.149.11010.72.149.111
2910.72.149.112/3010.72.149.113 – 10.72.149.11410.72.149.115
3010.72.149.116/3010.72.149.117 – 10.72.149.11810.72.149.119
3110.72.149.120/3010.72.149.121 – 10.72.149.12210.72.149.123
3210.72.149.124/3010.72.149.125 – 10.72.149.12610.72.149.127
3310.72.149.128/3010.72.149.129 – 10.72.149.13010.72.149.131
3410.72.149.132/3010.72.149.133 – 10.72.149.13410.72.149.135
3510.72.149.136/3010.72.149.137 – 10.72.149.13810.72.149.139
3610.72.149.140/3010.72.149.141 – 10.72.149.14210.72.149.143
3710.72.149.144/3010.72.149.145 – 10.72.149.14610.72.149.147
3810.72.149.148/3010.72.149.149 – 10.72.149.15010.72.149.151
3910.72.149.152/3010.72.149.153 – 10.72.149.15410.72.149.155
4010.72.149.156/3010.72.149.157 – 10.72.149.15810.72.149.159
4110.72.149.160/3010.72.149.161 – 10.72.149.16210.72.149.163
4210.72.149.164/3010.72.149.165 – 10.72.149.16610.72.149.167
4310.72.149.168/3010.72.149.169 – 10.72.149.17010.72.149.171
4410.72.149.172/3010.72.149.173 – 10.72.149.17410.72.149.175
4510.72.149.176/3010.72.149.177 – 10.72.149.17810.72.149.179
4610.72.149.180/3010.72.149.181 – 10.72.149.18210.72.149.183
4710.72.149.184/3010.72.149.185 – 10.72.149.18610.72.149.187
4810.72.149.188/3010.72.149.189 – 10.72.149.19010.72.149.191
4910.72.149.192/3010.72.149.193 – 10.72.149.19410.72.149.195
5010.72.149.196/3010.72.149.197 – 10.72.149.19810.72.149.199
5110.72.149.200/3010.72.149.201 – 10.72.149.20210.72.149.203
5210.72.149.204/3010.72.149.205 – 10.72.149.20610.72.149.207
5310.72.149.208/3010.72.149.209 – 10.72.149.21010.72.149.211
5410.72.149.212/3010.72.149.213 – 10.72.149.21410.72.149.215
5510.72.149.216/3010.72.149.217 – 10.72.149.21810.72.149.219
5610.72.149.220/3010.72.149.221 – 10.72.149.22210.72.149.223
5710.72.149.224/3010.72.149.225 – 10.72.149.22610.72.149.227
5810.72.149.228/3010.72.149.229 – 10.72.149.23010.72.149.231
5910.72.149.232/3010.72.149.233 – 10.72.149.23410.72.149.235
6010.72.149.236/3010.72.149.237 – 10.72.149.23810.72.149.239
6110.72.149.240/3010.72.149.241 – 10.72.149.24210.72.149.243
6210.72.149.244/3010.72.149.245 – 10.72.149.24610.72.149.247
6310.72.149.248/3010.72.149.249 – 10.72.149.25010.72.149.251
6410.72.149.252/3010.72.149.253 – 10.72.149.25410.72.149.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →