ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.70.76.192/26
network10.70.76.192/26
broadcast10.70.76.255
first host10.70.76.193
last host10.70.76.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.70.76.192/26
address00001010.01000110.01001100.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.01000110.01001100.11000000
broadcast00001010.01000110.01001100.11111111
green = network part, grey = host part
hex0x0a464cc0
decimal172379328
reverse dns192.76.70.10.in-addr.arpa
ipv4-mapped::ffff:a46:4cc0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.70.76.192/3210.70.76.192 – 10.70.76.19210.70.76.192
210.70.76.193/3210.70.76.193 – 10.70.76.19310.70.76.193
310.70.76.194/3210.70.76.194 – 10.70.76.19410.70.76.194
410.70.76.195/3210.70.76.195 – 10.70.76.19510.70.76.195
510.70.76.196/3210.70.76.196 – 10.70.76.19610.70.76.196
610.70.76.197/3210.70.76.197 – 10.70.76.19710.70.76.197
710.70.76.198/3210.70.76.198 – 10.70.76.19810.70.76.198
810.70.76.199/3210.70.76.199 – 10.70.76.19910.70.76.199
910.70.76.200/3210.70.76.200 – 10.70.76.20010.70.76.200
1010.70.76.201/3210.70.76.201 – 10.70.76.20110.70.76.201
1110.70.76.202/3210.70.76.202 – 10.70.76.20210.70.76.202
1210.70.76.203/3210.70.76.203 – 10.70.76.20310.70.76.203
1310.70.76.204/3210.70.76.204 – 10.70.76.20410.70.76.204
1410.70.76.205/3210.70.76.205 – 10.70.76.20510.70.76.205
1510.70.76.206/3210.70.76.206 – 10.70.76.20610.70.76.206
1610.70.76.207/3210.70.76.207 – 10.70.76.20710.70.76.207
1710.70.76.208/3210.70.76.208 – 10.70.76.20810.70.76.208
1810.70.76.209/3210.70.76.209 – 10.70.76.20910.70.76.209
1910.70.76.210/3210.70.76.210 – 10.70.76.21010.70.76.210
2010.70.76.211/3210.70.76.211 – 10.70.76.21110.70.76.211
2110.70.76.212/3210.70.76.212 – 10.70.76.21210.70.76.212
2210.70.76.213/3210.70.76.213 – 10.70.76.21310.70.76.213
2310.70.76.214/3210.70.76.214 – 10.70.76.21410.70.76.214
2410.70.76.215/3210.70.76.215 – 10.70.76.21510.70.76.215
2510.70.76.216/3210.70.76.216 – 10.70.76.21610.70.76.216
2610.70.76.217/3210.70.76.217 – 10.70.76.21710.70.76.217
2710.70.76.218/3210.70.76.218 – 10.70.76.21810.70.76.218
2810.70.76.219/3210.70.76.219 – 10.70.76.21910.70.76.219
2910.70.76.220/3210.70.76.220 – 10.70.76.22010.70.76.220
3010.70.76.221/3210.70.76.221 – 10.70.76.22110.70.76.221
3110.70.76.222/3210.70.76.222 – 10.70.76.22210.70.76.222
3210.70.76.223/3210.70.76.223 – 10.70.76.22310.70.76.223
3310.70.76.224/3210.70.76.224 – 10.70.76.22410.70.76.224
3410.70.76.225/3210.70.76.225 – 10.70.76.22510.70.76.225
3510.70.76.226/3210.70.76.226 – 10.70.76.22610.70.76.226
3610.70.76.227/3210.70.76.227 – 10.70.76.22710.70.76.227
3710.70.76.228/3210.70.76.228 – 10.70.76.22810.70.76.228
3810.70.76.229/3210.70.76.229 – 10.70.76.22910.70.76.229
3910.70.76.230/3210.70.76.230 – 10.70.76.23010.70.76.230
4010.70.76.231/3210.70.76.231 – 10.70.76.23110.70.76.231
4110.70.76.232/3210.70.76.232 – 10.70.76.23210.70.76.232
4210.70.76.233/3210.70.76.233 – 10.70.76.23310.70.76.233
4310.70.76.234/3210.70.76.234 – 10.70.76.23410.70.76.234
4410.70.76.235/3210.70.76.235 – 10.70.76.23510.70.76.235
4510.70.76.236/3210.70.76.236 – 10.70.76.23610.70.76.236
4610.70.76.237/3210.70.76.237 – 10.70.76.23710.70.76.237
4710.70.76.238/3210.70.76.238 – 10.70.76.23810.70.76.238
4810.70.76.239/3210.70.76.239 – 10.70.76.23910.70.76.239
4910.70.76.240/3210.70.76.240 – 10.70.76.24010.70.76.240
5010.70.76.241/3210.70.76.241 – 10.70.76.24110.70.76.241
5110.70.76.242/3210.70.76.242 – 10.70.76.24210.70.76.242
5210.70.76.243/3210.70.76.243 – 10.70.76.24310.70.76.243
5310.70.76.244/3210.70.76.244 – 10.70.76.24410.70.76.244
5410.70.76.245/3210.70.76.245 – 10.70.76.24510.70.76.245
5510.70.76.246/3210.70.76.246 – 10.70.76.24610.70.76.246
5610.70.76.247/3210.70.76.247 – 10.70.76.24710.70.76.247
5710.70.76.248/3210.70.76.248 – 10.70.76.24810.70.76.248
5810.70.76.249/3210.70.76.249 – 10.70.76.24910.70.76.249
5910.70.76.250/3210.70.76.250 – 10.70.76.25010.70.76.250
6010.70.76.251/3210.70.76.251 – 10.70.76.25110.70.76.251
6110.70.76.252/3210.70.76.252 – 10.70.76.25210.70.76.252
6210.70.76.253/3210.70.76.253 – 10.70.76.25310.70.76.253
6310.70.76.254/3210.70.76.254 – 10.70.76.25410.70.76.254
6410.70.76.255/3210.70.76.255 – 10.70.76.25510.70.76.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →