ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.69.76.0/22
network10.69.76.0/22
broadcast10.69.79.255
first host10.69.76.1
last host10.69.79.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.69.76.0/22
address00001010.01000101.01001100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.01000101.01001100.00000000
broadcast00001010.01000101.01001111.11111111
green = network part, grey = host part
hex0x0a454c00
decimal172313600
reverse dns0.76.69.10.in-addr.arpa
ipv4-mapped::ffff:a45:4c00

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.69.76.0/2810.69.76.1 – 10.69.76.1410.69.76.15
210.69.76.16/2810.69.76.17 – 10.69.76.3010.69.76.31
310.69.76.32/2810.69.76.33 – 10.69.76.4610.69.76.47
410.69.76.48/2810.69.76.49 – 10.69.76.6210.69.76.63
510.69.76.64/2810.69.76.65 – 10.69.76.7810.69.76.79
610.69.76.80/2810.69.76.81 – 10.69.76.9410.69.76.95
710.69.76.96/2810.69.76.97 – 10.69.76.11010.69.76.111
810.69.76.112/2810.69.76.113 – 10.69.76.12610.69.76.127
910.69.76.128/2810.69.76.129 – 10.69.76.14210.69.76.143
1010.69.76.144/2810.69.76.145 – 10.69.76.15810.69.76.159
1110.69.76.160/2810.69.76.161 – 10.69.76.17410.69.76.175
1210.69.76.176/2810.69.76.177 – 10.69.76.19010.69.76.191
1310.69.76.192/2810.69.76.193 – 10.69.76.20610.69.76.207
1410.69.76.208/2810.69.76.209 – 10.69.76.22210.69.76.223
1510.69.76.224/2810.69.76.225 – 10.69.76.23810.69.76.239
1610.69.76.240/2810.69.76.241 – 10.69.76.25410.69.76.255
1710.69.77.0/2810.69.77.1 – 10.69.77.1410.69.77.15
1810.69.77.16/2810.69.77.17 – 10.69.77.3010.69.77.31
1910.69.77.32/2810.69.77.33 – 10.69.77.4610.69.77.47
2010.69.77.48/2810.69.77.49 – 10.69.77.6210.69.77.63
2110.69.77.64/2810.69.77.65 – 10.69.77.7810.69.77.79
2210.69.77.80/2810.69.77.81 – 10.69.77.9410.69.77.95
2310.69.77.96/2810.69.77.97 – 10.69.77.11010.69.77.111
2410.69.77.112/2810.69.77.113 – 10.69.77.12610.69.77.127
2510.69.77.128/2810.69.77.129 – 10.69.77.14210.69.77.143
2610.69.77.144/2810.69.77.145 – 10.69.77.15810.69.77.159
2710.69.77.160/2810.69.77.161 – 10.69.77.17410.69.77.175
2810.69.77.176/2810.69.77.177 – 10.69.77.19010.69.77.191
2910.69.77.192/2810.69.77.193 – 10.69.77.20610.69.77.207
3010.69.77.208/2810.69.77.209 – 10.69.77.22210.69.77.223
3110.69.77.224/2810.69.77.225 – 10.69.77.23810.69.77.239
3210.69.77.240/2810.69.77.241 – 10.69.77.25410.69.77.255
3310.69.78.0/2810.69.78.1 – 10.69.78.1410.69.78.15
3410.69.78.16/2810.69.78.17 – 10.69.78.3010.69.78.31
3510.69.78.32/2810.69.78.33 – 10.69.78.4610.69.78.47
3610.69.78.48/2810.69.78.49 – 10.69.78.6210.69.78.63
3710.69.78.64/2810.69.78.65 – 10.69.78.7810.69.78.79
3810.69.78.80/2810.69.78.81 – 10.69.78.9410.69.78.95
3910.69.78.96/2810.69.78.97 – 10.69.78.11010.69.78.111
4010.69.78.112/2810.69.78.113 – 10.69.78.12610.69.78.127
4110.69.78.128/2810.69.78.129 – 10.69.78.14210.69.78.143
4210.69.78.144/2810.69.78.145 – 10.69.78.15810.69.78.159
4310.69.78.160/2810.69.78.161 – 10.69.78.17410.69.78.175
4410.69.78.176/2810.69.78.177 – 10.69.78.19010.69.78.191
4510.69.78.192/2810.69.78.193 – 10.69.78.20610.69.78.207
4610.69.78.208/2810.69.78.209 – 10.69.78.22210.69.78.223
4710.69.78.224/2810.69.78.225 – 10.69.78.23810.69.78.239
4810.69.78.240/2810.69.78.241 – 10.69.78.25410.69.78.255
4910.69.79.0/2810.69.79.1 – 10.69.79.1410.69.79.15
5010.69.79.16/2810.69.79.17 – 10.69.79.3010.69.79.31
5110.69.79.32/2810.69.79.33 – 10.69.79.4610.69.79.47
5210.69.79.48/2810.69.79.49 – 10.69.79.6210.69.79.63
5310.69.79.64/2810.69.79.65 – 10.69.79.7810.69.79.79
5410.69.79.80/2810.69.79.81 – 10.69.79.9410.69.79.95
5510.69.79.96/2810.69.79.97 – 10.69.79.11010.69.79.111
5610.69.79.112/2810.69.79.113 – 10.69.79.12610.69.79.127
5710.69.79.128/2810.69.79.129 – 10.69.79.14210.69.79.143
5810.69.79.144/2810.69.79.145 – 10.69.79.15810.69.79.159
5910.69.79.160/2810.69.79.161 – 10.69.79.17410.69.79.175
6010.69.79.176/2810.69.79.177 – 10.69.79.19010.69.79.191
6110.69.79.192/2810.69.79.193 – 10.69.79.20610.69.79.207
6210.69.79.208/2810.69.79.209 – 10.69.79.22210.69.79.223
6310.69.79.224/2810.69.79.225 – 10.69.79.23810.69.79.239
6410.69.79.240/2810.69.79.241 – 10.69.79.25410.69.79.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →