ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.65.239.0/24
network10.65.239.0/24
broadcast10.65.239.255
first host10.65.239.1
last host10.65.239.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.65.239.0/24
address00001010.01000001.11101111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01000001.11101111.00000000
broadcast00001010.01000001.11101111.11111111
green = network part, grey = host part
hex0x0a41ef00
decimal172093184
reverse dns0.239.65.10.in-addr.arpa
ipv4-mapped::ffff:a41:ef00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.65.239.0/3010.65.239.1 – 10.65.239.210.65.239.3
210.65.239.4/3010.65.239.5 – 10.65.239.610.65.239.7
310.65.239.8/3010.65.239.9 – 10.65.239.1010.65.239.11
410.65.239.12/3010.65.239.13 – 10.65.239.1410.65.239.15
510.65.239.16/3010.65.239.17 – 10.65.239.1810.65.239.19
610.65.239.20/3010.65.239.21 – 10.65.239.2210.65.239.23
710.65.239.24/3010.65.239.25 – 10.65.239.2610.65.239.27
810.65.239.28/3010.65.239.29 – 10.65.239.3010.65.239.31
910.65.239.32/3010.65.239.33 – 10.65.239.3410.65.239.35
1010.65.239.36/3010.65.239.37 – 10.65.239.3810.65.239.39
1110.65.239.40/3010.65.239.41 – 10.65.239.4210.65.239.43
1210.65.239.44/3010.65.239.45 – 10.65.239.4610.65.239.47
1310.65.239.48/3010.65.239.49 – 10.65.239.5010.65.239.51
1410.65.239.52/3010.65.239.53 – 10.65.239.5410.65.239.55
1510.65.239.56/3010.65.239.57 – 10.65.239.5810.65.239.59
1610.65.239.60/3010.65.239.61 – 10.65.239.6210.65.239.63
1710.65.239.64/3010.65.239.65 – 10.65.239.6610.65.239.67
1810.65.239.68/3010.65.239.69 – 10.65.239.7010.65.239.71
1910.65.239.72/3010.65.239.73 – 10.65.239.7410.65.239.75
2010.65.239.76/3010.65.239.77 – 10.65.239.7810.65.239.79
2110.65.239.80/3010.65.239.81 – 10.65.239.8210.65.239.83
2210.65.239.84/3010.65.239.85 – 10.65.239.8610.65.239.87
2310.65.239.88/3010.65.239.89 – 10.65.239.9010.65.239.91
2410.65.239.92/3010.65.239.93 – 10.65.239.9410.65.239.95
2510.65.239.96/3010.65.239.97 – 10.65.239.9810.65.239.99
2610.65.239.100/3010.65.239.101 – 10.65.239.10210.65.239.103
2710.65.239.104/3010.65.239.105 – 10.65.239.10610.65.239.107
2810.65.239.108/3010.65.239.109 – 10.65.239.11010.65.239.111
2910.65.239.112/3010.65.239.113 – 10.65.239.11410.65.239.115
3010.65.239.116/3010.65.239.117 – 10.65.239.11810.65.239.119
3110.65.239.120/3010.65.239.121 – 10.65.239.12210.65.239.123
3210.65.239.124/3010.65.239.125 – 10.65.239.12610.65.239.127
3310.65.239.128/3010.65.239.129 – 10.65.239.13010.65.239.131
3410.65.239.132/3010.65.239.133 – 10.65.239.13410.65.239.135
3510.65.239.136/3010.65.239.137 – 10.65.239.13810.65.239.139
3610.65.239.140/3010.65.239.141 – 10.65.239.14210.65.239.143
3710.65.239.144/3010.65.239.145 – 10.65.239.14610.65.239.147
3810.65.239.148/3010.65.239.149 – 10.65.239.15010.65.239.151
3910.65.239.152/3010.65.239.153 – 10.65.239.15410.65.239.155
4010.65.239.156/3010.65.239.157 – 10.65.239.15810.65.239.159
4110.65.239.160/3010.65.239.161 – 10.65.239.16210.65.239.163
4210.65.239.164/3010.65.239.165 – 10.65.239.16610.65.239.167
4310.65.239.168/3010.65.239.169 – 10.65.239.17010.65.239.171
4410.65.239.172/3010.65.239.173 – 10.65.239.17410.65.239.175
4510.65.239.176/3010.65.239.177 – 10.65.239.17810.65.239.179
4610.65.239.180/3010.65.239.181 – 10.65.239.18210.65.239.183
4710.65.239.184/3010.65.239.185 – 10.65.239.18610.65.239.187
4810.65.239.188/3010.65.239.189 – 10.65.239.19010.65.239.191
4910.65.239.192/3010.65.239.193 – 10.65.239.19410.65.239.195
5010.65.239.196/3010.65.239.197 – 10.65.239.19810.65.239.199
5110.65.239.200/3010.65.239.201 – 10.65.239.20210.65.239.203
5210.65.239.204/3010.65.239.205 – 10.65.239.20610.65.239.207
5310.65.239.208/3010.65.239.209 – 10.65.239.21010.65.239.211
5410.65.239.212/3010.65.239.213 – 10.65.239.21410.65.239.215
5510.65.239.216/3010.65.239.217 – 10.65.239.21810.65.239.219
5610.65.239.220/3010.65.239.221 – 10.65.239.22210.65.239.223
5710.65.239.224/3010.65.239.225 – 10.65.239.22610.65.239.227
5810.65.239.228/3010.65.239.229 – 10.65.239.23010.65.239.231
5910.65.239.232/3010.65.239.233 – 10.65.239.23410.65.239.235
6010.65.239.236/3010.65.239.237 – 10.65.239.23810.65.239.239
6110.65.239.240/3010.65.239.241 – 10.65.239.24210.65.239.243
6210.65.239.244/3010.65.239.245 – 10.65.239.24610.65.239.247
6310.65.239.248/3010.65.239.249 – 10.65.239.25010.65.239.251
6410.65.239.252/3010.65.239.253 – 10.65.239.25410.65.239.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →