ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.65.231.0/24
network10.65.231.0/24
broadcast10.65.231.255
first host10.65.231.1
last host10.65.231.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.65.231.0/24
address00001010.01000001.11100111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01000001.11100111.00000000
broadcast00001010.01000001.11100111.11111111
green = network part, grey = host part
hex0x0a41e700
decimal172091136
reverse dns0.231.65.10.in-addr.arpa
ipv4-mapped::ffff:a41:e700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.65.231.0/3010.65.231.1 – 10.65.231.210.65.231.3
210.65.231.4/3010.65.231.5 – 10.65.231.610.65.231.7
310.65.231.8/3010.65.231.9 – 10.65.231.1010.65.231.11
410.65.231.12/3010.65.231.13 – 10.65.231.1410.65.231.15
510.65.231.16/3010.65.231.17 – 10.65.231.1810.65.231.19
610.65.231.20/3010.65.231.21 – 10.65.231.2210.65.231.23
710.65.231.24/3010.65.231.25 – 10.65.231.2610.65.231.27
810.65.231.28/3010.65.231.29 – 10.65.231.3010.65.231.31
910.65.231.32/3010.65.231.33 – 10.65.231.3410.65.231.35
1010.65.231.36/3010.65.231.37 – 10.65.231.3810.65.231.39
1110.65.231.40/3010.65.231.41 – 10.65.231.4210.65.231.43
1210.65.231.44/3010.65.231.45 – 10.65.231.4610.65.231.47
1310.65.231.48/3010.65.231.49 – 10.65.231.5010.65.231.51
1410.65.231.52/3010.65.231.53 – 10.65.231.5410.65.231.55
1510.65.231.56/3010.65.231.57 – 10.65.231.5810.65.231.59
1610.65.231.60/3010.65.231.61 – 10.65.231.6210.65.231.63
1710.65.231.64/3010.65.231.65 – 10.65.231.6610.65.231.67
1810.65.231.68/3010.65.231.69 – 10.65.231.7010.65.231.71
1910.65.231.72/3010.65.231.73 – 10.65.231.7410.65.231.75
2010.65.231.76/3010.65.231.77 – 10.65.231.7810.65.231.79
2110.65.231.80/3010.65.231.81 – 10.65.231.8210.65.231.83
2210.65.231.84/3010.65.231.85 – 10.65.231.8610.65.231.87
2310.65.231.88/3010.65.231.89 – 10.65.231.9010.65.231.91
2410.65.231.92/3010.65.231.93 – 10.65.231.9410.65.231.95
2510.65.231.96/3010.65.231.97 – 10.65.231.9810.65.231.99
2610.65.231.100/3010.65.231.101 – 10.65.231.10210.65.231.103
2710.65.231.104/3010.65.231.105 – 10.65.231.10610.65.231.107
2810.65.231.108/3010.65.231.109 – 10.65.231.11010.65.231.111
2910.65.231.112/3010.65.231.113 – 10.65.231.11410.65.231.115
3010.65.231.116/3010.65.231.117 – 10.65.231.11810.65.231.119
3110.65.231.120/3010.65.231.121 – 10.65.231.12210.65.231.123
3210.65.231.124/3010.65.231.125 – 10.65.231.12610.65.231.127
3310.65.231.128/3010.65.231.129 – 10.65.231.13010.65.231.131
3410.65.231.132/3010.65.231.133 – 10.65.231.13410.65.231.135
3510.65.231.136/3010.65.231.137 – 10.65.231.13810.65.231.139
3610.65.231.140/3010.65.231.141 – 10.65.231.14210.65.231.143
3710.65.231.144/3010.65.231.145 – 10.65.231.14610.65.231.147
3810.65.231.148/3010.65.231.149 – 10.65.231.15010.65.231.151
3910.65.231.152/3010.65.231.153 – 10.65.231.15410.65.231.155
4010.65.231.156/3010.65.231.157 – 10.65.231.15810.65.231.159
4110.65.231.160/3010.65.231.161 – 10.65.231.16210.65.231.163
4210.65.231.164/3010.65.231.165 – 10.65.231.16610.65.231.167
4310.65.231.168/3010.65.231.169 – 10.65.231.17010.65.231.171
4410.65.231.172/3010.65.231.173 – 10.65.231.17410.65.231.175
4510.65.231.176/3010.65.231.177 – 10.65.231.17810.65.231.179
4610.65.231.180/3010.65.231.181 – 10.65.231.18210.65.231.183
4710.65.231.184/3010.65.231.185 – 10.65.231.18610.65.231.187
4810.65.231.188/3010.65.231.189 – 10.65.231.19010.65.231.191
4910.65.231.192/3010.65.231.193 – 10.65.231.19410.65.231.195
5010.65.231.196/3010.65.231.197 – 10.65.231.19810.65.231.199
5110.65.231.200/3010.65.231.201 – 10.65.231.20210.65.231.203
5210.65.231.204/3010.65.231.205 – 10.65.231.20610.65.231.207
5310.65.231.208/3010.65.231.209 – 10.65.231.21010.65.231.211
5410.65.231.212/3010.65.231.213 – 10.65.231.21410.65.231.215
5510.65.231.216/3010.65.231.217 – 10.65.231.21810.65.231.219
5610.65.231.220/3010.65.231.221 – 10.65.231.22210.65.231.223
5710.65.231.224/3010.65.231.225 – 10.65.231.22610.65.231.227
5810.65.231.228/3010.65.231.229 – 10.65.231.23010.65.231.231
5910.65.231.232/3010.65.231.233 – 10.65.231.23410.65.231.235
6010.65.231.236/3010.65.231.237 – 10.65.231.23810.65.231.239
6110.65.231.240/3010.65.231.241 – 10.65.231.24210.65.231.243
6210.65.231.244/3010.65.231.245 – 10.65.231.24610.65.231.247
6310.65.231.248/3010.65.231.249 – 10.65.231.25010.65.231.251
6410.65.231.252/3010.65.231.253 – 10.65.231.25410.65.231.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →