ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.65.151.0/24
network10.65.151.0/24
broadcast10.65.151.255
first host10.65.151.1
last host10.65.151.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.65.151.0/24
address00001010.01000001.10010111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.01000001.10010111.00000000
broadcast00001010.01000001.10010111.11111111
green = network part, grey = host part
hex0x0a419700
decimal172070656
reverse dns0.151.65.10.in-addr.arpa
ipv4-mapped::ffff:a41:9700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.65.151.0/3010.65.151.1 – 10.65.151.210.65.151.3
210.65.151.4/3010.65.151.5 – 10.65.151.610.65.151.7
310.65.151.8/3010.65.151.9 – 10.65.151.1010.65.151.11
410.65.151.12/3010.65.151.13 – 10.65.151.1410.65.151.15
510.65.151.16/3010.65.151.17 – 10.65.151.1810.65.151.19
610.65.151.20/3010.65.151.21 – 10.65.151.2210.65.151.23
710.65.151.24/3010.65.151.25 – 10.65.151.2610.65.151.27
810.65.151.28/3010.65.151.29 – 10.65.151.3010.65.151.31
910.65.151.32/3010.65.151.33 – 10.65.151.3410.65.151.35
1010.65.151.36/3010.65.151.37 – 10.65.151.3810.65.151.39
1110.65.151.40/3010.65.151.41 – 10.65.151.4210.65.151.43
1210.65.151.44/3010.65.151.45 – 10.65.151.4610.65.151.47
1310.65.151.48/3010.65.151.49 – 10.65.151.5010.65.151.51
1410.65.151.52/3010.65.151.53 – 10.65.151.5410.65.151.55
1510.65.151.56/3010.65.151.57 – 10.65.151.5810.65.151.59
1610.65.151.60/3010.65.151.61 – 10.65.151.6210.65.151.63
1710.65.151.64/3010.65.151.65 – 10.65.151.6610.65.151.67
1810.65.151.68/3010.65.151.69 – 10.65.151.7010.65.151.71
1910.65.151.72/3010.65.151.73 – 10.65.151.7410.65.151.75
2010.65.151.76/3010.65.151.77 – 10.65.151.7810.65.151.79
2110.65.151.80/3010.65.151.81 – 10.65.151.8210.65.151.83
2210.65.151.84/3010.65.151.85 – 10.65.151.8610.65.151.87
2310.65.151.88/3010.65.151.89 – 10.65.151.9010.65.151.91
2410.65.151.92/3010.65.151.93 – 10.65.151.9410.65.151.95
2510.65.151.96/3010.65.151.97 – 10.65.151.9810.65.151.99
2610.65.151.100/3010.65.151.101 – 10.65.151.10210.65.151.103
2710.65.151.104/3010.65.151.105 – 10.65.151.10610.65.151.107
2810.65.151.108/3010.65.151.109 – 10.65.151.11010.65.151.111
2910.65.151.112/3010.65.151.113 – 10.65.151.11410.65.151.115
3010.65.151.116/3010.65.151.117 – 10.65.151.11810.65.151.119
3110.65.151.120/3010.65.151.121 – 10.65.151.12210.65.151.123
3210.65.151.124/3010.65.151.125 – 10.65.151.12610.65.151.127
3310.65.151.128/3010.65.151.129 – 10.65.151.13010.65.151.131
3410.65.151.132/3010.65.151.133 – 10.65.151.13410.65.151.135
3510.65.151.136/3010.65.151.137 – 10.65.151.13810.65.151.139
3610.65.151.140/3010.65.151.141 – 10.65.151.14210.65.151.143
3710.65.151.144/3010.65.151.145 – 10.65.151.14610.65.151.147
3810.65.151.148/3010.65.151.149 – 10.65.151.15010.65.151.151
3910.65.151.152/3010.65.151.153 – 10.65.151.15410.65.151.155
4010.65.151.156/3010.65.151.157 – 10.65.151.15810.65.151.159
4110.65.151.160/3010.65.151.161 – 10.65.151.16210.65.151.163
4210.65.151.164/3010.65.151.165 – 10.65.151.16610.65.151.167
4310.65.151.168/3010.65.151.169 – 10.65.151.17010.65.151.171
4410.65.151.172/3010.65.151.173 – 10.65.151.17410.65.151.175
4510.65.151.176/3010.65.151.177 – 10.65.151.17810.65.151.179
4610.65.151.180/3010.65.151.181 – 10.65.151.18210.65.151.183
4710.65.151.184/3010.65.151.185 – 10.65.151.18610.65.151.187
4810.65.151.188/3010.65.151.189 – 10.65.151.19010.65.151.191
4910.65.151.192/3010.65.151.193 – 10.65.151.19410.65.151.195
5010.65.151.196/3010.65.151.197 – 10.65.151.19810.65.151.199
5110.65.151.200/3010.65.151.201 – 10.65.151.20210.65.151.203
5210.65.151.204/3010.65.151.205 – 10.65.151.20610.65.151.207
5310.65.151.208/3010.65.151.209 – 10.65.151.21010.65.151.211
5410.65.151.212/3010.65.151.213 – 10.65.151.21410.65.151.215
5510.65.151.216/3010.65.151.217 – 10.65.151.21810.65.151.219
5610.65.151.220/3010.65.151.221 – 10.65.151.22210.65.151.223
5710.65.151.224/3010.65.151.225 – 10.65.151.22610.65.151.227
5810.65.151.228/3010.65.151.229 – 10.65.151.23010.65.151.231
5910.65.151.232/3010.65.151.233 – 10.65.151.23410.65.151.235
6010.65.151.236/3010.65.151.237 – 10.65.151.23810.65.151.239
6110.65.151.240/3010.65.151.241 – 10.65.151.24210.65.151.243
6210.65.151.244/3010.65.151.245 – 10.65.151.24610.65.151.247
6310.65.151.248/3010.65.151.249 – 10.65.151.25010.65.151.251
6410.65.151.252/3010.65.151.253 – 10.65.151.25410.65.151.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →