ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.65.149.0/25
network10.65.149.0/25
broadcast10.65.149.127
first host10.65.149.1
last host10.65.149.126
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.65.149.0/25
address00001010.01000001.10010101.00000000
subnet mask11111111.11111111.11111111.10000000
network00001010.01000001.10010101.00000000
broadcast00001010.01000001.10010101.01111111
green = network part, grey = host part
hex0x0a419500
decimal172070144
reverse dns0.149.65.10.in-addr.arpa
ipv4-mapped::ffff:a41:9500

/25 split into /30 · 32 subnets

close ×
#networkhost rangebroadcast
110.65.149.0/3010.65.149.1 – 10.65.149.210.65.149.3
210.65.149.4/3010.65.149.5 – 10.65.149.610.65.149.7
310.65.149.8/3010.65.149.9 – 10.65.149.1010.65.149.11
410.65.149.12/3010.65.149.13 – 10.65.149.1410.65.149.15
510.65.149.16/3010.65.149.17 – 10.65.149.1810.65.149.19
610.65.149.20/3010.65.149.21 – 10.65.149.2210.65.149.23
710.65.149.24/3010.65.149.25 – 10.65.149.2610.65.149.27
810.65.149.28/3010.65.149.29 – 10.65.149.3010.65.149.31
910.65.149.32/3010.65.149.33 – 10.65.149.3410.65.149.35
1010.65.149.36/3010.65.149.37 – 10.65.149.3810.65.149.39
1110.65.149.40/3010.65.149.41 – 10.65.149.4210.65.149.43
1210.65.149.44/3010.65.149.45 – 10.65.149.4610.65.149.47
1310.65.149.48/3010.65.149.49 – 10.65.149.5010.65.149.51
1410.65.149.52/3010.65.149.53 – 10.65.149.5410.65.149.55
1510.65.149.56/3010.65.149.57 – 10.65.149.5810.65.149.59
1610.65.149.60/3010.65.149.61 – 10.65.149.6210.65.149.63
1710.65.149.64/3010.65.149.65 – 10.65.149.6610.65.149.67
1810.65.149.68/3010.65.149.69 – 10.65.149.7010.65.149.71
1910.65.149.72/3010.65.149.73 – 10.65.149.7410.65.149.75
2010.65.149.76/3010.65.149.77 – 10.65.149.7810.65.149.79
2110.65.149.80/3010.65.149.81 – 10.65.149.8210.65.149.83
2210.65.149.84/3010.65.149.85 – 10.65.149.8610.65.149.87
2310.65.149.88/3010.65.149.89 – 10.65.149.9010.65.149.91
2410.65.149.92/3010.65.149.93 – 10.65.149.9410.65.149.95
2510.65.149.96/3010.65.149.97 – 10.65.149.9810.65.149.99
2610.65.149.100/3010.65.149.101 – 10.65.149.10210.65.149.103
2710.65.149.104/3010.65.149.105 – 10.65.149.10610.65.149.107
2810.65.149.108/3010.65.149.109 – 10.65.149.11010.65.149.111
2910.65.149.112/3010.65.149.113 – 10.65.149.11410.65.149.115
3010.65.149.116/3010.65.149.117 – 10.65.149.11810.65.149.119
3110.65.149.120/3010.65.149.121 – 10.65.149.12210.65.149.123
3210.65.149.124/3010.65.149.125 – 10.65.149.12610.65.149.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →