ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.63.201.0/24
network10.63.201.0/24
broadcast10.63.201.255
first host10.63.201.1
last host10.63.201.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.63.201.0/24
address00001010.00111111.11001001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00111111.11001001.00000000
broadcast00001010.00111111.11001001.11111111
green = network part, grey = host part
hex0x0a3fc900
decimal171952384
reverse dns0.201.63.10.in-addr.arpa
ipv4-mapped::ffff:a3f:c900

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.63.201.0/3010.63.201.1 – 10.63.201.210.63.201.3
210.63.201.4/3010.63.201.5 – 10.63.201.610.63.201.7
310.63.201.8/3010.63.201.9 – 10.63.201.1010.63.201.11
410.63.201.12/3010.63.201.13 – 10.63.201.1410.63.201.15
510.63.201.16/3010.63.201.17 – 10.63.201.1810.63.201.19
610.63.201.20/3010.63.201.21 – 10.63.201.2210.63.201.23
710.63.201.24/3010.63.201.25 – 10.63.201.2610.63.201.27
810.63.201.28/3010.63.201.29 – 10.63.201.3010.63.201.31
910.63.201.32/3010.63.201.33 – 10.63.201.3410.63.201.35
1010.63.201.36/3010.63.201.37 – 10.63.201.3810.63.201.39
1110.63.201.40/3010.63.201.41 – 10.63.201.4210.63.201.43
1210.63.201.44/3010.63.201.45 – 10.63.201.4610.63.201.47
1310.63.201.48/3010.63.201.49 – 10.63.201.5010.63.201.51
1410.63.201.52/3010.63.201.53 – 10.63.201.5410.63.201.55
1510.63.201.56/3010.63.201.57 – 10.63.201.5810.63.201.59
1610.63.201.60/3010.63.201.61 – 10.63.201.6210.63.201.63
1710.63.201.64/3010.63.201.65 – 10.63.201.6610.63.201.67
1810.63.201.68/3010.63.201.69 – 10.63.201.7010.63.201.71
1910.63.201.72/3010.63.201.73 – 10.63.201.7410.63.201.75
2010.63.201.76/3010.63.201.77 – 10.63.201.7810.63.201.79
2110.63.201.80/3010.63.201.81 – 10.63.201.8210.63.201.83
2210.63.201.84/3010.63.201.85 – 10.63.201.8610.63.201.87
2310.63.201.88/3010.63.201.89 – 10.63.201.9010.63.201.91
2410.63.201.92/3010.63.201.93 – 10.63.201.9410.63.201.95
2510.63.201.96/3010.63.201.97 – 10.63.201.9810.63.201.99
2610.63.201.100/3010.63.201.101 – 10.63.201.10210.63.201.103
2710.63.201.104/3010.63.201.105 – 10.63.201.10610.63.201.107
2810.63.201.108/3010.63.201.109 – 10.63.201.11010.63.201.111
2910.63.201.112/3010.63.201.113 – 10.63.201.11410.63.201.115
3010.63.201.116/3010.63.201.117 – 10.63.201.11810.63.201.119
3110.63.201.120/3010.63.201.121 – 10.63.201.12210.63.201.123
3210.63.201.124/3010.63.201.125 – 10.63.201.12610.63.201.127
3310.63.201.128/3010.63.201.129 – 10.63.201.13010.63.201.131
3410.63.201.132/3010.63.201.133 – 10.63.201.13410.63.201.135
3510.63.201.136/3010.63.201.137 – 10.63.201.13810.63.201.139
3610.63.201.140/3010.63.201.141 – 10.63.201.14210.63.201.143
3710.63.201.144/3010.63.201.145 – 10.63.201.14610.63.201.147
3810.63.201.148/3010.63.201.149 – 10.63.201.15010.63.201.151
3910.63.201.152/3010.63.201.153 – 10.63.201.15410.63.201.155
4010.63.201.156/3010.63.201.157 – 10.63.201.15810.63.201.159
4110.63.201.160/3010.63.201.161 – 10.63.201.16210.63.201.163
4210.63.201.164/3010.63.201.165 – 10.63.201.16610.63.201.167
4310.63.201.168/3010.63.201.169 – 10.63.201.17010.63.201.171
4410.63.201.172/3010.63.201.173 – 10.63.201.17410.63.201.175
4510.63.201.176/3010.63.201.177 – 10.63.201.17810.63.201.179
4610.63.201.180/3010.63.201.181 – 10.63.201.18210.63.201.183
4710.63.201.184/3010.63.201.185 – 10.63.201.18610.63.201.187
4810.63.201.188/3010.63.201.189 – 10.63.201.19010.63.201.191
4910.63.201.192/3010.63.201.193 – 10.63.201.19410.63.201.195
5010.63.201.196/3010.63.201.197 – 10.63.201.19810.63.201.199
5110.63.201.200/3010.63.201.201 – 10.63.201.20210.63.201.203
5210.63.201.204/3010.63.201.205 – 10.63.201.20610.63.201.207
5310.63.201.208/3010.63.201.209 – 10.63.201.21010.63.201.211
5410.63.201.212/3010.63.201.213 – 10.63.201.21410.63.201.215
5510.63.201.216/3010.63.201.217 – 10.63.201.21810.63.201.219
5610.63.201.220/3010.63.201.221 – 10.63.201.22210.63.201.223
5710.63.201.224/3010.63.201.225 – 10.63.201.22610.63.201.227
5810.63.201.228/3010.63.201.229 – 10.63.201.23010.63.201.231
5910.63.201.232/3010.63.201.233 – 10.63.201.23410.63.201.235
6010.63.201.236/3010.63.201.237 – 10.63.201.23810.63.201.239
6110.63.201.240/3010.63.201.241 – 10.63.201.24210.63.201.243
6210.63.201.244/3010.63.201.245 – 10.63.201.24610.63.201.247
6310.63.201.248/3010.63.201.249 – 10.63.201.25010.63.201.251
6410.63.201.252/3010.63.201.253 – 10.63.201.25410.63.201.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →