ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.63.183.0/24
network10.63.183.0/24
broadcast10.63.183.255
first host10.63.183.1
last host10.63.183.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.63.183.0/24
address00001010.00111111.10110111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00111111.10110111.00000000
broadcast00001010.00111111.10110111.11111111
green = network part, grey = host part
hex0x0a3fb700
decimal171947776
reverse dns0.183.63.10.in-addr.arpa
ipv4-mapped::ffff:a3f:b700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.63.183.0/3010.63.183.1 – 10.63.183.210.63.183.3
210.63.183.4/3010.63.183.5 – 10.63.183.610.63.183.7
310.63.183.8/3010.63.183.9 – 10.63.183.1010.63.183.11
410.63.183.12/3010.63.183.13 – 10.63.183.1410.63.183.15
510.63.183.16/3010.63.183.17 – 10.63.183.1810.63.183.19
610.63.183.20/3010.63.183.21 – 10.63.183.2210.63.183.23
710.63.183.24/3010.63.183.25 – 10.63.183.2610.63.183.27
810.63.183.28/3010.63.183.29 – 10.63.183.3010.63.183.31
910.63.183.32/3010.63.183.33 – 10.63.183.3410.63.183.35
1010.63.183.36/3010.63.183.37 – 10.63.183.3810.63.183.39
1110.63.183.40/3010.63.183.41 – 10.63.183.4210.63.183.43
1210.63.183.44/3010.63.183.45 – 10.63.183.4610.63.183.47
1310.63.183.48/3010.63.183.49 – 10.63.183.5010.63.183.51
1410.63.183.52/3010.63.183.53 – 10.63.183.5410.63.183.55
1510.63.183.56/3010.63.183.57 – 10.63.183.5810.63.183.59
1610.63.183.60/3010.63.183.61 – 10.63.183.6210.63.183.63
1710.63.183.64/3010.63.183.65 – 10.63.183.6610.63.183.67
1810.63.183.68/3010.63.183.69 – 10.63.183.7010.63.183.71
1910.63.183.72/3010.63.183.73 – 10.63.183.7410.63.183.75
2010.63.183.76/3010.63.183.77 – 10.63.183.7810.63.183.79
2110.63.183.80/3010.63.183.81 – 10.63.183.8210.63.183.83
2210.63.183.84/3010.63.183.85 – 10.63.183.8610.63.183.87
2310.63.183.88/3010.63.183.89 – 10.63.183.9010.63.183.91
2410.63.183.92/3010.63.183.93 – 10.63.183.9410.63.183.95
2510.63.183.96/3010.63.183.97 – 10.63.183.9810.63.183.99
2610.63.183.100/3010.63.183.101 – 10.63.183.10210.63.183.103
2710.63.183.104/3010.63.183.105 – 10.63.183.10610.63.183.107
2810.63.183.108/3010.63.183.109 – 10.63.183.11010.63.183.111
2910.63.183.112/3010.63.183.113 – 10.63.183.11410.63.183.115
3010.63.183.116/3010.63.183.117 – 10.63.183.11810.63.183.119
3110.63.183.120/3010.63.183.121 – 10.63.183.12210.63.183.123
3210.63.183.124/3010.63.183.125 – 10.63.183.12610.63.183.127
3310.63.183.128/3010.63.183.129 – 10.63.183.13010.63.183.131
3410.63.183.132/3010.63.183.133 – 10.63.183.13410.63.183.135
3510.63.183.136/3010.63.183.137 – 10.63.183.13810.63.183.139
3610.63.183.140/3010.63.183.141 – 10.63.183.14210.63.183.143
3710.63.183.144/3010.63.183.145 – 10.63.183.14610.63.183.147
3810.63.183.148/3010.63.183.149 – 10.63.183.15010.63.183.151
3910.63.183.152/3010.63.183.153 – 10.63.183.15410.63.183.155
4010.63.183.156/3010.63.183.157 – 10.63.183.15810.63.183.159
4110.63.183.160/3010.63.183.161 – 10.63.183.16210.63.183.163
4210.63.183.164/3010.63.183.165 – 10.63.183.16610.63.183.167
4310.63.183.168/3010.63.183.169 – 10.63.183.17010.63.183.171
4410.63.183.172/3010.63.183.173 – 10.63.183.17410.63.183.175
4510.63.183.176/3010.63.183.177 – 10.63.183.17810.63.183.179
4610.63.183.180/3010.63.183.181 – 10.63.183.18210.63.183.183
4710.63.183.184/3010.63.183.185 – 10.63.183.18610.63.183.187
4810.63.183.188/3010.63.183.189 – 10.63.183.19010.63.183.191
4910.63.183.192/3010.63.183.193 – 10.63.183.19410.63.183.195
5010.63.183.196/3010.63.183.197 – 10.63.183.19810.63.183.199
5110.63.183.200/3010.63.183.201 – 10.63.183.20210.63.183.203
5210.63.183.204/3010.63.183.205 – 10.63.183.20610.63.183.207
5310.63.183.208/3010.63.183.209 – 10.63.183.21010.63.183.211
5410.63.183.212/3010.63.183.213 – 10.63.183.21410.63.183.215
5510.63.183.216/3010.63.183.217 – 10.63.183.21810.63.183.219
5610.63.183.220/3010.63.183.221 – 10.63.183.22210.63.183.223
5710.63.183.224/3010.63.183.225 – 10.63.183.22610.63.183.227
5810.63.183.228/3010.63.183.229 – 10.63.183.23010.63.183.231
5910.63.183.232/3010.63.183.233 – 10.63.183.23410.63.183.235
6010.63.183.236/3010.63.183.237 – 10.63.183.23810.63.183.239
6110.63.183.240/3010.63.183.241 – 10.63.183.24210.63.183.243
6210.63.183.244/3010.63.183.245 – 10.63.183.24610.63.183.247
6310.63.183.248/3010.63.183.249 – 10.63.183.25010.63.183.251
6410.63.183.252/3010.63.183.253 – 10.63.183.25410.63.183.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →