ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.60.0.0/14
network10.60.0.0/14
broadcast10.63.255.255
first host10.60.0.1
last host10.63.255.254
subnet mask255.252.0.0
wildcard0.3.255.255
addresses262,144
usable hosts262,142
classA
ipcalc 10.60.0.0/14
address00001010.00111100.00000000.00000000
subnet mask11111111.11111100.00000000.00000000
network00001010.00111100.00000000.00000000
broadcast00001010.00111111.11111111.11111111
green = network part, grey = host part
hex0x0a3c0000
decimal171704320
reverse dns0.0.60.10.in-addr.arpa
ipv4-mapped::ffff:a3c:0

/14 split into /19 · 32 subnets

close ×
#networkhost rangebroadcast
110.60.0.0/1910.60.0.1 – 10.60.31.25410.60.31.255
210.60.32.0/1910.60.32.1 – 10.60.63.25410.60.63.255
310.60.64.0/1910.60.64.1 – 10.60.95.25410.60.95.255
410.60.96.0/1910.60.96.1 – 10.60.127.25410.60.127.255
510.60.128.0/1910.60.128.1 – 10.60.159.25410.60.159.255
610.60.160.0/1910.60.160.1 – 10.60.191.25410.60.191.255
710.60.192.0/1910.60.192.1 – 10.60.223.25410.60.223.255
810.60.224.0/1910.60.224.1 – 10.60.255.25410.60.255.255
910.61.0.0/1910.61.0.1 – 10.61.31.25410.61.31.255
1010.61.32.0/1910.61.32.1 – 10.61.63.25410.61.63.255
1110.61.64.0/1910.61.64.1 – 10.61.95.25410.61.95.255
1210.61.96.0/1910.61.96.1 – 10.61.127.25410.61.127.255
1310.61.128.0/1910.61.128.1 – 10.61.159.25410.61.159.255
1410.61.160.0/1910.61.160.1 – 10.61.191.25410.61.191.255
1510.61.192.0/1910.61.192.1 – 10.61.223.25410.61.223.255
1610.61.224.0/1910.61.224.1 – 10.61.255.25410.61.255.255
1710.62.0.0/1910.62.0.1 – 10.62.31.25410.62.31.255
1810.62.32.0/1910.62.32.1 – 10.62.63.25410.62.63.255
1910.62.64.0/1910.62.64.1 – 10.62.95.25410.62.95.255
2010.62.96.0/1910.62.96.1 – 10.62.127.25410.62.127.255
2110.62.128.0/1910.62.128.1 – 10.62.159.25410.62.159.255
2210.62.160.0/1910.62.160.1 – 10.62.191.25410.62.191.255
2310.62.192.0/1910.62.192.1 – 10.62.223.25410.62.223.255
2410.62.224.0/1910.62.224.1 – 10.62.255.25410.62.255.255
2510.63.0.0/1910.63.0.1 – 10.63.31.25410.63.31.255
2610.63.32.0/1910.63.32.1 – 10.63.63.25410.63.63.255
2710.63.64.0/1910.63.64.1 – 10.63.95.25410.63.95.255
2810.63.96.0/1910.63.96.1 – 10.63.127.25410.63.127.255
2910.63.128.0/1910.63.128.1 – 10.63.159.25410.63.159.255
3010.63.160.0/1910.63.160.1 – 10.63.191.25410.63.191.255
3110.63.192.0/1910.63.192.1 – 10.63.223.25410.63.223.255
3210.63.224.0/1910.63.224.1 – 10.63.255.25410.63.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /14
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,1421
/15255.254.0.0131,072131,0702 split →
/16255.255.0.065,53665,5344 split →
/17255.255.128.032,76832,7668 split →
/18255.255.192.016,38416,38216 split →
/19255.255.224.08,1928,19032 split →
/20255.255.240.04,0964,09464 split →
/21255.255.248.02,0482,046128 split →
/22255.255.252.01,0241,022256 split →
/23255.255.254.0512510512 split →
/24255.255.255.02562541,024 split →
/25255.255.255.1281281262,048 split →
/26255.255.255.19264624,096 split →
/27255.255.255.22432308,192 split →
/28255.255.255.240161416,384 split →
/29255.255.255.2488632,768 split →
/30255.255.255.2524265,536 split →
/31255.255.255.25422131,072 split →
/32255.255.255.25511262,144 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →