ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.6.160.0/19
network10.6.160.0/19
broadcast10.6.191.255
first host10.6.160.1
last host10.6.191.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.6.160.0/19
address00001010.00000110.10100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00000110.10100000.00000000
broadcast00001010.00000110.10111111.11111111
green = network part, grey = host part
hex0x0a06a000
decimal168206336
reverse dns0.160.6.10.in-addr.arpa
ipv4-mapped::ffff:a06:a000

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.6.160.0/2510.6.160.1 – 10.6.160.12610.6.160.127
210.6.160.128/2510.6.160.129 – 10.6.160.25410.6.160.255
310.6.161.0/2510.6.161.1 – 10.6.161.12610.6.161.127
410.6.161.128/2510.6.161.129 – 10.6.161.25410.6.161.255
510.6.162.0/2510.6.162.1 – 10.6.162.12610.6.162.127
610.6.162.128/2510.6.162.129 – 10.6.162.25410.6.162.255
710.6.163.0/2510.6.163.1 – 10.6.163.12610.6.163.127
810.6.163.128/2510.6.163.129 – 10.6.163.25410.6.163.255
910.6.164.0/2510.6.164.1 – 10.6.164.12610.6.164.127
1010.6.164.128/2510.6.164.129 – 10.6.164.25410.6.164.255
1110.6.165.0/2510.6.165.1 – 10.6.165.12610.6.165.127
1210.6.165.128/2510.6.165.129 – 10.6.165.25410.6.165.255
1310.6.166.0/2510.6.166.1 – 10.6.166.12610.6.166.127
1410.6.166.128/2510.6.166.129 – 10.6.166.25410.6.166.255
1510.6.167.0/2510.6.167.1 – 10.6.167.12610.6.167.127
1610.6.167.128/2510.6.167.129 – 10.6.167.25410.6.167.255
1710.6.168.0/2510.6.168.1 – 10.6.168.12610.6.168.127
1810.6.168.128/2510.6.168.129 – 10.6.168.25410.6.168.255
1910.6.169.0/2510.6.169.1 – 10.6.169.12610.6.169.127
2010.6.169.128/2510.6.169.129 – 10.6.169.25410.6.169.255
2110.6.170.0/2510.6.170.1 – 10.6.170.12610.6.170.127
2210.6.170.128/2510.6.170.129 – 10.6.170.25410.6.170.255
2310.6.171.0/2510.6.171.1 – 10.6.171.12610.6.171.127
2410.6.171.128/2510.6.171.129 – 10.6.171.25410.6.171.255
2510.6.172.0/2510.6.172.1 – 10.6.172.12610.6.172.127
2610.6.172.128/2510.6.172.129 – 10.6.172.25410.6.172.255
2710.6.173.0/2510.6.173.1 – 10.6.173.12610.6.173.127
2810.6.173.128/2510.6.173.129 – 10.6.173.25410.6.173.255
2910.6.174.0/2510.6.174.1 – 10.6.174.12610.6.174.127
3010.6.174.128/2510.6.174.129 – 10.6.174.25410.6.174.255
3110.6.175.0/2510.6.175.1 – 10.6.175.12610.6.175.127
3210.6.175.128/2510.6.175.129 – 10.6.175.25410.6.175.255
3310.6.176.0/2510.6.176.1 – 10.6.176.12610.6.176.127
3410.6.176.128/2510.6.176.129 – 10.6.176.25410.6.176.255
3510.6.177.0/2510.6.177.1 – 10.6.177.12610.6.177.127
3610.6.177.128/2510.6.177.129 – 10.6.177.25410.6.177.255
3710.6.178.0/2510.6.178.1 – 10.6.178.12610.6.178.127
3810.6.178.128/2510.6.178.129 – 10.6.178.25410.6.178.255
3910.6.179.0/2510.6.179.1 – 10.6.179.12610.6.179.127
4010.6.179.128/2510.6.179.129 – 10.6.179.25410.6.179.255
4110.6.180.0/2510.6.180.1 – 10.6.180.12610.6.180.127
4210.6.180.128/2510.6.180.129 – 10.6.180.25410.6.180.255
4310.6.181.0/2510.6.181.1 – 10.6.181.12610.6.181.127
4410.6.181.128/2510.6.181.129 – 10.6.181.25410.6.181.255
4510.6.182.0/2510.6.182.1 – 10.6.182.12610.6.182.127
4610.6.182.128/2510.6.182.129 – 10.6.182.25410.6.182.255
4710.6.183.0/2510.6.183.1 – 10.6.183.12610.6.183.127
4810.6.183.128/2510.6.183.129 – 10.6.183.25410.6.183.255
4910.6.184.0/2510.6.184.1 – 10.6.184.12610.6.184.127
5010.6.184.128/2510.6.184.129 – 10.6.184.25410.6.184.255
5110.6.185.0/2510.6.185.1 – 10.6.185.12610.6.185.127
5210.6.185.128/2510.6.185.129 – 10.6.185.25410.6.185.255
5310.6.186.0/2510.6.186.1 – 10.6.186.12610.6.186.127
5410.6.186.128/2510.6.186.129 – 10.6.186.25410.6.186.255
5510.6.187.0/2510.6.187.1 – 10.6.187.12610.6.187.127
5610.6.187.128/2510.6.187.129 – 10.6.187.25410.6.187.255
5710.6.188.0/2510.6.188.1 – 10.6.188.12610.6.188.127
5810.6.188.128/2510.6.188.129 – 10.6.188.25410.6.188.255
5910.6.189.0/2510.6.189.1 – 10.6.189.12610.6.189.127
6010.6.189.128/2510.6.189.129 – 10.6.189.25410.6.189.255
6110.6.190.0/2510.6.190.1 – 10.6.190.12610.6.190.127
6210.6.190.128/2510.6.190.129 – 10.6.190.25410.6.190.255
6310.6.191.0/2510.6.191.1 – 10.6.191.12610.6.191.127
6410.6.191.128/2510.6.191.129 – 10.6.191.25410.6.191.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →