ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.56.64.0/18
network10.56.64.0/18
broadcast10.56.127.255
first host10.56.64.1
last host10.56.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.56.64.0/18
address00001010.00111000.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00111000.01000000.00000000
broadcast00001010.00111000.01111111.11111111
green = network part, grey = host part
hex0x0a384000
decimal171458560
reverse dns0.64.56.10.in-addr.arpa
ipv4-mapped::ffff:a38:4000

/18 split into /23 · 32 subnets

close ×
#networkhost rangebroadcast
110.56.64.0/2310.56.64.1 – 10.56.65.25410.56.65.255
210.56.66.0/2310.56.66.1 – 10.56.67.25410.56.67.255
310.56.68.0/2310.56.68.1 – 10.56.69.25410.56.69.255
410.56.70.0/2310.56.70.1 – 10.56.71.25410.56.71.255
510.56.72.0/2310.56.72.1 – 10.56.73.25410.56.73.255
610.56.74.0/2310.56.74.1 – 10.56.75.25410.56.75.255
710.56.76.0/2310.56.76.1 – 10.56.77.25410.56.77.255
810.56.78.0/2310.56.78.1 – 10.56.79.25410.56.79.255
910.56.80.0/2310.56.80.1 – 10.56.81.25410.56.81.255
1010.56.82.0/2310.56.82.1 – 10.56.83.25410.56.83.255
1110.56.84.0/2310.56.84.1 – 10.56.85.25410.56.85.255
1210.56.86.0/2310.56.86.1 – 10.56.87.25410.56.87.255
1310.56.88.0/2310.56.88.1 – 10.56.89.25410.56.89.255
1410.56.90.0/2310.56.90.1 – 10.56.91.25410.56.91.255
1510.56.92.0/2310.56.92.1 – 10.56.93.25410.56.93.255
1610.56.94.0/2310.56.94.1 – 10.56.95.25410.56.95.255
1710.56.96.0/2310.56.96.1 – 10.56.97.25410.56.97.255
1810.56.98.0/2310.56.98.1 – 10.56.99.25410.56.99.255
1910.56.100.0/2310.56.100.1 – 10.56.101.25410.56.101.255
2010.56.102.0/2310.56.102.1 – 10.56.103.25410.56.103.255
2110.56.104.0/2310.56.104.1 – 10.56.105.25410.56.105.255
2210.56.106.0/2310.56.106.1 – 10.56.107.25410.56.107.255
2310.56.108.0/2310.56.108.1 – 10.56.109.25410.56.109.255
2410.56.110.0/2310.56.110.1 – 10.56.111.25410.56.111.255
2510.56.112.0/2310.56.112.1 – 10.56.113.25410.56.113.255
2610.56.114.0/2310.56.114.1 – 10.56.115.25410.56.115.255
2710.56.116.0/2310.56.116.1 – 10.56.117.25410.56.117.255
2810.56.118.0/2310.56.118.1 – 10.56.119.25410.56.119.255
2910.56.120.0/2310.56.120.1 – 10.56.121.25410.56.121.255
3010.56.122.0/2310.56.122.1 – 10.56.123.25410.56.123.255
3110.56.124.0/2310.56.124.1 – 10.56.125.25410.56.125.255
3210.56.126.0/2310.56.126.1 – 10.56.127.25410.56.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →