ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.53.64.0/18
network10.53.64.0/18
broadcast10.53.127.255
first host10.53.64.1
last host10.53.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.53.64.0/18
address00001010.00110101.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00110101.01000000.00000000
broadcast00001010.00110101.01111111.11111111
green = network part, grey = host part
hex0x0a354000
decimal171261952
reverse dns0.64.53.10.in-addr.arpa
ipv4-mapped::ffff:a35:4000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.53.64.0/2410.53.64.1 – 10.53.64.25410.53.64.255
210.53.65.0/2410.53.65.1 – 10.53.65.25410.53.65.255
310.53.66.0/2410.53.66.1 – 10.53.66.25410.53.66.255
410.53.67.0/2410.53.67.1 – 10.53.67.25410.53.67.255
510.53.68.0/2410.53.68.1 – 10.53.68.25410.53.68.255
610.53.69.0/2410.53.69.1 – 10.53.69.25410.53.69.255
710.53.70.0/2410.53.70.1 – 10.53.70.25410.53.70.255
810.53.71.0/2410.53.71.1 – 10.53.71.25410.53.71.255
910.53.72.0/2410.53.72.1 – 10.53.72.25410.53.72.255
1010.53.73.0/2410.53.73.1 – 10.53.73.25410.53.73.255
1110.53.74.0/2410.53.74.1 – 10.53.74.25410.53.74.255
1210.53.75.0/2410.53.75.1 – 10.53.75.25410.53.75.255
1310.53.76.0/2410.53.76.1 – 10.53.76.25410.53.76.255
1410.53.77.0/2410.53.77.1 – 10.53.77.25410.53.77.255
1510.53.78.0/2410.53.78.1 – 10.53.78.25410.53.78.255
1610.53.79.0/2410.53.79.1 – 10.53.79.25410.53.79.255
1710.53.80.0/2410.53.80.1 – 10.53.80.25410.53.80.255
1810.53.81.0/2410.53.81.1 – 10.53.81.25410.53.81.255
1910.53.82.0/2410.53.82.1 – 10.53.82.25410.53.82.255
2010.53.83.0/2410.53.83.1 – 10.53.83.25410.53.83.255
2110.53.84.0/2410.53.84.1 – 10.53.84.25410.53.84.255
2210.53.85.0/2410.53.85.1 – 10.53.85.25410.53.85.255
2310.53.86.0/2410.53.86.1 – 10.53.86.25410.53.86.255
2410.53.87.0/2410.53.87.1 – 10.53.87.25410.53.87.255
2510.53.88.0/2410.53.88.1 – 10.53.88.25410.53.88.255
2610.53.89.0/2410.53.89.1 – 10.53.89.25410.53.89.255
2710.53.90.0/2410.53.90.1 – 10.53.90.25410.53.90.255
2810.53.91.0/2410.53.91.1 – 10.53.91.25410.53.91.255
2910.53.92.0/2410.53.92.1 – 10.53.92.25410.53.92.255
3010.53.93.0/2410.53.93.1 – 10.53.93.25410.53.93.255
3110.53.94.0/2410.53.94.1 – 10.53.94.25410.53.94.255
3210.53.95.0/2410.53.95.1 – 10.53.95.25410.53.95.255
3310.53.96.0/2410.53.96.1 – 10.53.96.25410.53.96.255
3410.53.97.0/2410.53.97.1 – 10.53.97.25410.53.97.255
3510.53.98.0/2410.53.98.1 – 10.53.98.25410.53.98.255
3610.53.99.0/2410.53.99.1 – 10.53.99.25410.53.99.255
3710.53.100.0/2410.53.100.1 – 10.53.100.25410.53.100.255
3810.53.101.0/2410.53.101.1 – 10.53.101.25410.53.101.255
3910.53.102.0/2410.53.102.1 – 10.53.102.25410.53.102.255
4010.53.103.0/2410.53.103.1 – 10.53.103.25410.53.103.255
4110.53.104.0/2410.53.104.1 – 10.53.104.25410.53.104.255
4210.53.105.0/2410.53.105.1 – 10.53.105.25410.53.105.255
4310.53.106.0/2410.53.106.1 – 10.53.106.25410.53.106.255
4410.53.107.0/2410.53.107.1 – 10.53.107.25410.53.107.255
4510.53.108.0/2410.53.108.1 – 10.53.108.25410.53.108.255
4610.53.109.0/2410.53.109.1 – 10.53.109.25410.53.109.255
4710.53.110.0/2410.53.110.1 – 10.53.110.25410.53.110.255
4810.53.111.0/2410.53.111.1 – 10.53.111.25410.53.111.255
4910.53.112.0/2410.53.112.1 – 10.53.112.25410.53.112.255
5010.53.113.0/2410.53.113.1 – 10.53.113.25410.53.113.255
5110.53.114.0/2410.53.114.1 – 10.53.114.25410.53.114.255
5210.53.115.0/2410.53.115.1 – 10.53.115.25410.53.115.255
5310.53.116.0/2410.53.116.1 – 10.53.116.25410.53.116.255
5410.53.117.0/2410.53.117.1 – 10.53.117.25410.53.117.255
5510.53.118.0/2410.53.118.1 – 10.53.118.25410.53.118.255
5610.53.119.0/2410.53.119.1 – 10.53.119.25410.53.119.255
5710.53.120.0/2410.53.120.1 – 10.53.120.25410.53.120.255
5810.53.121.0/2410.53.121.1 – 10.53.121.25410.53.121.255
5910.53.122.0/2410.53.122.1 – 10.53.122.25410.53.122.255
6010.53.123.0/2410.53.123.1 – 10.53.123.25410.53.123.255
6110.53.124.0/2410.53.124.1 – 10.53.124.25410.53.124.255
6210.53.125.0/2410.53.125.1 – 10.53.125.25410.53.125.255
6310.53.126.0/2410.53.126.1 – 10.53.126.25410.53.126.255
6410.53.127.0/2410.53.127.1 – 10.53.127.25410.53.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →