ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.53.64.0/18
network10.53.64.0/18
broadcast10.53.127.255
first host10.53.64.1
last host10.53.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.53.64.0/18
address00001010.00110101.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00110101.01000000.00000000
broadcast00001010.00110101.01111111.11111111
green = network part, grey = host part
hex0x0a354000
decimal171261952
reverse dns0.64.53.10.in-addr.arpa
ipv4-mapped::ffff:a35:4000

/18 split into /22 · 16 subnets

close ×
#networkhost rangebroadcast
110.53.64.0/2210.53.64.1 – 10.53.67.25410.53.67.255
210.53.68.0/2210.53.68.1 – 10.53.71.25410.53.71.255
310.53.72.0/2210.53.72.1 – 10.53.75.25410.53.75.255
410.53.76.0/2210.53.76.1 – 10.53.79.25410.53.79.255
510.53.80.0/2210.53.80.1 – 10.53.83.25410.53.83.255
610.53.84.0/2210.53.84.1 – 10.53.87.25410.53.87.255
710.53.88.0/2210.53.88.1 – 10.53.91.25410.53.91.255
810.53.92.0/2210.53.92.1 – 10.53.95.25410.53.95.255
910.53.96.0/2210.53.96.1 – 10.53.99.25410.53.99.255
1010.53.100.0/2210.53.100.1 – 10.53.103.25410.53.103.255
1110.53.104.0/2210.53.104.1 – 10.53.107.25410.53.107.255
1210.53.108.0/2210.53.108.1 – 10.53.111.25410.53.111.255
1310.53.112.0/2210.53.112.1 – 10.53.115.25410.53.115.255
1410.53.116.0/2210.53.116.1 – 10.53.119.25410.53.119.255
1510.53.120.0/2210.53.120.1 – 10.53.123.25410.53.123.255
1610.53.124.0/2210.53.124.1 – 10.53.127.25410.53.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →