ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.53.232.0/24
network10.53.232.0/24
broadcast10.53.232.255
first host10.53.232.1
last host10.53.232.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.53.232.0/24
address00001010.00110101.11101000.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00110101.11101000.00000000
broadcast00001010.00110101.11101000.11111111
green = network part, grey = host part
hex0x0a35e800
decimal171304960
reverse dns0.232.53.10.in-addr.arpa
ipv4-mapped::ffff:a35:e800

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.53.232.0/3010.53.232.1 – 10.53.232.210.53.232.3
210.53.232.4/3010.53.232.5 – 10.53.232.610.53.232.7
310.53.232.8/3010.53.232.9 – 10.53.232.1010.53.232.11
410.53.232.12/3010.53.232.13 – 10.53.232.1410.53.232.15
510.53.232.16/3010.53.232.17 – 10.53.232.1810.53.232.19
610.53.232.20/3010.53.232.21 – 10.53.232.2210.53.232.23
710.53.232.24/3010.53.232.25 – 10.53.232.2610.53.232.27
810.53.232.28/3010.53.232.29 – 10.53.232.3010.53.232.31
910.53.232.32/3010.53.232.33 – 10.53.232.3410.53.232.35
1010.53.232.36/3010.53.232.37 – 10.53.232.3810.53.232.39
1110.53.232.40/3010.53.232.41 – 10.53.232.4210.53.232.43
1210.53.232.44/3010.53.232.45 – 10.53.232.4610.53.232.47
1310.53.232.48/3010.53.232.49 – 10.53.232.5010.53.232.51
1410.53.232.52/3010.53.232.53 – 10.53.232.5410.53.232.55
1510.53.232.56/3010.53.232.57 – 10.53.232.5810.53.232.59
1610.53.232.60/3010.53.232.61 – 10.53.232.6210.53.232.63
1710.53.232.64/3010.53.232.65 – 10.53.232.6610.53.232.67
1810.53.232.68/3010.53.232.69 – 10.53.232.7010.53.232.71
1910.53.232.72/3010.53.232.73 – 10.53.232.7410.53.232.75
2010.53.232.76/3010.53.232.77 – 10.53.232.7810.53.232.79
2110.53.232.80/3010.53.232.81 – 10.53.232.8210.53.232.83
2210.53.232.84/3010.53.232.85 – 10.53.232.8610.53.232.87
2310.53.232.88/3010.53.232.89 – 10.53.232.9010.53.232.91
2410.53.232.92/3010.53.232.93 – 10.53.232.9410.53.232.95
2510.53.232.96/3010.53.232.97 – 10.53.232.9810.53.232.99
2610.53.232.100/3010.53.232.101 – 10.53.232.10210.53.232.103
2710.53.232.104/3010.53.232.105 – 10.53.232.10610.53.232.107
2810.53.232.108/3010.53.232.109 – 10.53.232.11010.53.232.111
2910.53.232.112/3010.53.232.113 – 10.53.232.11410.53.232.115
3010.53.232.116/3010.53.232.117 – 10.53.232.11810.53.232.119
3110.53.232.120/3010.53.232.121 – 10.53.232.12210.53.232.123
3210.53.232.124/3010.53.232.125 – 10.53.232.12610.53.232.127
3310.53.232.128/3010.53.232.129 – 10.53.232.13010.53.232.131
3410.53.232.132/3010.53.232.133 – 10.53.232.13410.53.232.135
3510.53.232.136/3010.53.232.137 – 10.53.232.13810.53.232.139
3610.53.232.140/3010.53.232.141 – 10.53.232.14210.53.232.143
3710.53.232.144/3010.53.232.145 – 10.53.232.14610.53.232.147
3810.53.232.148/3010.53.232.149 – 10.53.232.15010.53.232.151
3910.53.232.152/3010.53.232.153 – 10.53.232.15410.53.232.155
4010.53.232.156/3010.53.232.157 – 10.53.232.15810.53.232.159
4110.53.232.160/3010.53.232.161 – 10.53.232.16210.53.232.163
4210.53.232.164/3010.53.232.165 – 10.53.232.16610.53.232.167
4310.53.232.168/3010.53.232.169 – 10.53.232.17010.53.232.171
4410.53.232.172/3010.53.232.173 – 10.53.232.17410.53.232.175
4510.53.232.176/3010.53.232.177 – 10.53.232.17810.53.232.179
4610.53.232.180/3010.53.232.181 – 10.53.232.18210.53.232.183
4710.53.232.184/3010.53.232.185 – 10.53.232.18610.53.232.187
4810.53.232.188/3010.53.232.189 – 10.53.232.19010.53.232.191
4910.53.232.192/3010.53.232.193 – 10.53.232.19410.53.232.195
5010.53.232.196/3010.53.232.197 – 10.53.232.19810.53.232.199
5110.53.232.200/3010.53.232.201 – 10.53.232.20210.53.232.203
5210.53.232.204/3010.53.232.205 – 10.53.232.20610.53.232.207
5310.53.232.208/3010.53.232.209 – 10.53.232.21010.53.232.211
5410.53.232.212/3010.53.232.213 – 10.53.232.21410.53.232.215
5510.53.232.216/3010.53.232.217 – 10.53.232.21810.53.232.219
5610.53.232.220/3010.53.232.221 – 10.53.232.22210.53.232.223
5710.53.232.224/3010.53.232.225 – 10.53.232.22610.53.232.227
5810.53.232.228/3010.53.232.229 – 10.53.232.23010.53.232.231
5910.53.232.232/3010.53.232.233 – 10.53.232.23410.53.232.235
6010.53.232.236/3010.53.232.237 – 10.53.232.23810.53.232.239
6110.53.232.240/3010.53.232.241 – 10.53.232.24210.53.232.243
6210.53.232.244/3010.53.232.245 – 10.53.232.24610.53.232.247
6310.53.232.248/3010.53.232.249 – 10.53.232.25010.53.232.251
6410.53.232.252/3010.53.232.253 – 10.53.232.25410.53.232.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →