ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.5.6.0/24
network10.5.6.0/24
broadcast10.5.6.255
first host10.5.6.1
last host10.5.6.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.5.6.0/24
address00001010.00000101.00000110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000101.00000110.00000000
broadcast00001010.00000101.00000110.11111111
green = network part, grey = host part
hex0x0a050600
decimal168101376
reverse dns0.6.5.10.in-addr.arpa
ipv4-mapped::ffff:a05:600

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.5.6.0/3010.5.6.1 – 10.5.6.210.5.6.3
210.5.6.4/3010.5.6.5 – 10.5.6.610.5.6.7
310.5.6.8/3010.5.6.9 – 10.5.6.1010.5.6.11
410.5.6.12/3010.5.6.13 – 10.5.6.1410.5.6.15
510.5.6.16/3010.5.6.17 – 10.5.6.1810.5.6.19
610.5.6.20/3010.5.6.21 – 10.5.6.2210.5.6.23
710.5.6.24/3010.5.6.25 – 10.5.6.2610.5.6.27
810.5.6.28/3010.5.6.29 – 10.5.6.3010.5.6.31
910.5.6.32/3010.5.6.33 – 10.5.6.3410.5.6.35
1010.5.6.36/3010.5.6.37 – 10.5.6.3810.5.6.39
1110.5.6.40/3010.5.6.41 – 10.5.6.4210.5.6.43
1210.5.6.44/3010.5.6.45 – 10.5.6.4610.5.6.47
1310.5.6.48/3010.5.6.49 – 10.5.6.5010.5.6.51
1410.5.6.52/3010.5.6.53 – 10.5.6.5410.5.6.55
1510.5.6.56/3010.5.6.57 – 10.5.6.5810.5.6.59
1610.5.6.60/3010.5.6.61 – 10.5.6.6210.5.6.63
1710.5.6.64/3010.5.6.65 – 10.5.6.6610.5.6.67
1810.5.6.68/3010.5.6.69 – 10.5.6.7010.5.6.71
1910.5.6.72/3010.5.6.73 – 10.5.6.7410.5.6.75
2010.5.6.76/3010.5.6.77 – 10.5.6.7810.5.6.79
2110.5.6.80/3010.5.6.81 – 10.5.6.8210.5.6.83
2210.5.6.84/3010.5.6.85 – 10.5.6.8610.5.6.87
2310.5.6.88/3010.5.6.89 – 10.5.6.9010.5.6.91
2410.5.6.92/3010.5.6.93 – 10.5.6.9410.5.6.95
2510.5.6.96/3010.5.6.97 – 10.5.6.9810.5.6.99
2610.5.6.100/3010.5.6.101 – 10.5.6.10210.5.6.103
2710.5.6.104/3010.5.6.105 – 10.5.6.10610.5.6.107
2810.5.6.108/3010.5.6.109 – 10.5.6.11010.5.6.111
2910.5.6.112/3010.5.6.113 – 10.5.6.11410.5.6.115
3010.5.6.116/3010.5.6.117 – 10.5.6.11810.5.6.119
3110.5.6.120/3010.5.6.121 – 10.5.6.12210.5.6.123
3210.5.6.124/3010.5.6.125 – 10.5.6.12610.5.6.127
3310.5.6.128/3010.5.6.129 – 10.5.6.13010.5.6.131
3410.5.6.132/3010.5.6.133 – 10.5.6.13410.5.6.135
3510.5.6.136/3010.5.6.137 – 10.5.6.13810.5.6.139
3610.5.6.140/3010.5.6.141 – 10.5.6.14210.5.6.143
3710.5.6.144/3010.5.6.145 – 10.5.6.14610.5.6.147
3810.5.6.148/3010.5.6.149 – 10.5.6.15010.5.6.151
3910.5.6.152/3010.5.6.153 – 10.5.6.15410.5.6.155
4010.5.6.156/3010.5.6.157 – 10.5.6.15810.5.6.159
4110.5.6.160/3010.5.6.161 – 10.5.6.16210.5.6.163
4210.5.6.164/3010.5.6.165 – 10.5.6.16610.5.6.167
4310.5.6.168/3010.5.6.169 – 10.5.6.17010.5.6.171
4410.5.6.172/3010.5.6.173 – 10.5.6.17410.5.6.175
4510.5.6.176/3010.5.6.177 – 10.5.6.17810.5.6.179
4610.5.6.180/3010.5.6.181 – 10.5.6.18210.5.6.183
4710.5.6.184/3010.5.6.185 – 10.5.6.18610.5.6.187
4810.5.6.188/3010.5.6.189 – 10.5.6.19010.5.6.191
4910.5.6.192/3010.5.6.193 – 10.5.6.19410.5.6.195
5010.5.6.196/3010.5.6.197 – 10.5.6.19810.5.6.199
5110.5.6.200/3010.5.6.201 – 10.5.6.20210.5.6.203
5210.5.6.204/3010.5.6.205 – 10.5.6.20610.5.6.207
5310.5.6.208/3010.5.6.209 – 10.5.6.21010.5.6.211
5410.5.6.212/3010.5.6.213 – 10.5.6.21410.5.6.215
5510.5.6.216/3010.5.6.217 – 10.5.6.21810.5.6.219
5610.5.6.220/3010.5.6.221 – 10.5.6.22210.5.6.223
5710.5.6.224/3010.5.6.225 – 10.5.6.22610.5.6.227
5810.5.6.228/3010.5.6.229 – 10.5.6.23010.5.6.231
5910.5.6.232/3010.5.6.233 – 10.5.6.23410.5.6.235
6010.5.6.236/3010.5.6.237 – 10.5.6.23810.5.6.239
6110.5.6.240/3010.5.6.241 – 10.5.6.24210.5.6.243
6210.5.6.244/3010.5.6.245 – 10.5.6.24610.5.6.247
6310.5.6.248/3010.5.6.249 – 10.5.6.25010.5.6.251
6410.5.6.252/3010.5.6.253 – 10.5.6.25410.5.6.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →