ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.48.152.0/22
network10.48.152.0/22
broadcast10.48.155.255
first host10.48.152.1
last host10.48.155.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.48.152.0/22
address00001010.00110000.10011000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00110000.10011000.00000000
broadcast00001010.00110000.10011011.11111111
green = network part, grey = host part
hex0x0a309800
decimal170956800
reverse dns0.152.48.10.in-addr.arpa
ipv4-mapped::ffff:a30:9800

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.48.152.0/2810.48.152.1 – 10.48.152.1410.48.152.15
210.48.152.16/2810.48.152.17 – 10.48.152.3010.48.152.31
310.48.152.32/2810.48.152.33 – 10.48.152.4610.48.152.47
410.48.152.48/2810.48.152.49 – 10.48.152.6210.48.152.63
510.48.152.64/2810.48.152.65 – 10.48.152.7810.48.152.79
610.48.152.80/2810.48.152.81 – 10.48.152.9410.48.152.95
710.48.152.96/2810.48.152.97 – 10.48.152.11010.48.152.111
810.48.152.112/2810.48.152.113 – 10.48.152.12610.48.152.127
910.48.152.128/2810.48.152.129 – 10.48.152.14210.48.152.143
1010.48.152.144/2810.48.152.145 – 10.48.152.15810.48.152.159
1110.48.152.160/2810.48.152.161 – 10.48.152.17410.48.152.175
1210.48.152.176/2810.48.152.177 – 10.48.152.19010.48.152.191
1310.48.152.192/2810.48.152.193 – 10.48.152.20610.48.152.207
1410.48.152.208/2810.48.152.209 – 10.48.152.22210.48.152.223
1510.48.152.224/2810.48.152.225 – 10.48.152.23810.48.152.239
1610.48.152.240/2810.48.152.241 – 10.48.152.25410.48.152.255
1710.48.153.0/2810.48.153.1 – 10.48.153.1410.48.153.15
1810.48.153.16/2810.48.153.17 – 10.48.153.3010.48.153.31
1910.48.153.32/2810.48.153.33 – 10.48.153.4610.48.153.47
2010.48.153.48/2810.48.153.49 – 10.48.153.6210.48.153.63
2110.48.153.64/2810.48.153.65 – 10.48.153.7810.48.153.79
2210.48.153.80/2810.48.153.81 – 10.48.153.9410.48.153.95
2310.48.153.96/2810.48.153.97 – 10.48.153.11010.48.153.111
2410.48.153.112/2810.48.153.113 – 10.48.153.12610.48.153.127
2510.48.153.128/2810.48.153.129 – 10.48.153.14210.48.153.143
2610.48.153.144/2810.48.153.145 – 10.48.153.15810.48.153.159
2710.48.153.160/2810.48.153.161 – 10.48.153.17410.48.153.175
2810.48.153.176/2810.48.153.177 – 10.48.153.19010.48.153.191
2910.48.153.192/2810.48.153.193 – 10.48.153.20610.48.153.207
3010.48.153.208/2810.48.153.209 – 10.48.153.22210.48.153.223
3110.48.153.224/2810.48.153.225 – 10.48.153.23810.48.153.239
3210.48.153.240/2810.48.153.241 – 10.48.153.25410.48.153.255
3310.48.154.0/2810.48.154.1 – 10.48.154.1410.48.154.15
3410.48.154.16/2810.48.154.17 – 10.48.154.3010.48.154.31
3510.48.154.32/2810.48.154.33 – 10.48.154.4610.48.154.47
3610.48.154.48/2810.48.154.49 – 10.48.154.6210.48.154.63
3710.48.154.64/2810.48.154.65 – 10.48.154.7810.48.154.79
3810.48.154.80/2810.48.154.81 – 10.48.154.9410.48.154.95
3910.48.154.96/2810.48.154.97 – 10.48.154.11010.48.154.111
4010.48.154.112/2810.48.154.113 – 10.48.154.12610.48.154.127
4110.48.154.128/2810.48.154.129 – 10.48.154.14210.48.154.143
4210.48.154.144/2810.48.154.145 – 10.48.154.15810.48.154.159
4310.48.154.160/2810.48.154.161 – 10.48.154.17410.48.154.175
4410.48.154.176/2810.48.154.177 – 10.48.154.19010.48.154.191
4510.48.154.192/2810.48.154.193 – 10.48.154.20610.48.154.207
4610.48.154.208/2810.48.154.209 – 10.48.154.22210.48.154.223
4710.48.154.224/2810.48.154.225 – 10.48.154.23810.48.154.239
4810.48.154.240/2810.48.154.241 – 10.48.154.25410.48.154.255
4910.48.155.0/2810.48.155.1 – 10.48.155.1410.48.155.15
5010.48.155.16/2810.48.155.17 – 10.48.155.3010.48.155.31
5110.48.155.32/2810.48.155.33 – 10.48.155.4610.48.155.47
5210.48.155.48/2810.48.155.49 – 10.48.155.6210.48.155.63
5310.48.155.64/2810.48.155.65 – 10.48.155.7810.48.155.79
5410.48.155.80/2810.48.155.81 – 10.48.155.9410.48.155.95
5510.48.155.96/2810.48.155.97 – 10.48.155.11010.48.155.111
5610.48.155.112/2810.48.155.113 – 10.48.155.12610.48.155.127
5710.48.155.128/2810.48.155.129 – 10.48.155.14210.48.155.143
5810.48.155.144/2810.48.155.145 – 10.48.155.15810.48.155.159
5910.48.155.160/2810.48.155.161 – 10.48.155.17410.48.155.175
6010.48.155.176/2810.48.155.177 – 10.48.155.19010.48.155.191
6110.48.155.192/2810.48.155.193 – 10.48.155.20610.48.155.207
6210.48.155.208/2810.48.155.209 – 10.48.155.22210.48.155.223
6310.48.155.224/2810.48.155.225 – 10.48.155.23810.48.155.239
6410.48.155.240/2810.48.155.241 – 10.48.155.25410.48.155.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →