ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.47.64.0/18
network10.47.64.0/18
broadcast10.47.127.255
first host10.47.64.1
last host10.47.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.47.64.0/18
address00001010.00101111.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00101111.01000000.00000000
broadcast00001010.00101111.01111111.11111111
green = network part, grey = host part
hex0x0a2f4000
decimal170868736
reverse dns0.64.47.10.in-addr.arpa
ipv4-mapped::ffff:a2f:4000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.47.64.0/2410.47.64.1 – 10.47.64.25410.47.64.255
210.47.65.0/2410.47.65.1 – 10.47.65.25410.47.65.255
310.47.66.0/2410.47.66.1 – 10.47.66.25410.47.66.255
410.47.67.0/2410.47.67.1 – 10.47.67.25410.47.67.255
510.47.68.0/2410.47.68.1 – 10.47.68.25410.47.68.255
610.47.69.0/2410.47.69.1 – 10.47.69.25410.47.69.255
710.47.70.0/2410.47.70.1 – 10.47.70.25410.47.70.255
810.47.71.0/2410.47.71.1 – 10.47.71.25410.47.71.255
910.47.72.0/2410.47.72.1 – 10.47.72.25410.47.72.255
1010.47.73.0/2410.47.73.1 – 10.47.73.25410.47.73.255
1110.47.74.0/2410.47.74.1 – 10.47.74.25410.47.74.255
1210.47.75.0/2410.47.75.1 – 10.47.75.25410.47.75.255
1310.47.76.0/2410.47.76.1 – 10.47.76.25410.47.76.255
1410.47.77.0/2410.47.77.1 – 10.47.77.25410.47.77.255
1510.47.78.0/2410.47.78.1 – 10.47.78.25410.47.78.255
1610.47.79.0/2410.47.79.1 – 10.47.79.25410.47.79.255
1710.47.80.0/2410.47.80.1 – 10.47.80.25410.47.80.255
1810.47.81.0/2410.47.81.1 – 10.47.81.25410.47.81.255
1910.47.82.0/2410.47.82.1 – 10.47.82.25410.47.82.255
2010.47.83.0/2410.47.83.1 – 10.47.83.25410.47.83.255
2110.47.84.0/2410.47.84.1 – 10.47.84.25410.47.84.255
2210.47.85.0/2410.47.85.1 – 10.47.85.25410.47.85.255
2310.47.86.0/2410.47.86.1 – 10.47.86.25410.47.86.255
2410.47.87.0/2410.47.87.1 – 10.47.87.25410.47.87.255
2510.47.88.0/2410.47.88.1 – 10.47.88.25410.47.88.255
2610.47.89.0/2410.47.89.1 – 10.47.89.25410.47.89.255
2710.47.90.0/2410.47.90.1 – 10.47.90.25410.47.90.255
2810.47.91.0/2410.47.91.1 – 10.47.91.25410.47.91.255
2910.47.92.0/2410.47.92.1 – 10.47.92.25410.47.92.255
3010.47.93.0/2410.47.93.1 – 10.47.93.25410.47.93.255
3110.47.94.0/2410.47.94.1 – 10.47.94.25410.47.94.255
3210.47.95.0/2410.47.95.1 – 10.47.95.25410.47.95.255
3310.47.96.0/2410.47.96.1 – 10.47.96.25410.47.96.255
3410.47.97.0/2410.47.97.1 – 10.47.97.25410.47.97.255
3510.47.98.0/2410.47.98.1 – 10.47.98.25410.47.98.255
3610.47.99.0/2410.47.99.1 – 10.47.99.25410.47.99.255
3710.47.100.0/2410.47.100.1 – 10.47.100.25410.47.100.255
3810.47.101.0/2410.47.101.1 – 10.47.101.25410.47.101.255
3910.47.102.0/2410.47.102.1 – 10.47.102.25410.47.102.255
4010.47.103.0/2410.47.103.1 – 10.47.103.25410.47.103.255
4110.47.104.0/2410.47.104.1 – 10.47.104.25410.47.104.255
4210.47.105.0/2410.47.105.1 – 10.47.105.25410.47.105.255
4310.47.106.0/2410.47.106.1 – 10.47.106.25410.47.106.255
4410.47.107.0/2410.47.107.1 – 10.47.107.25410.47.107.255
4510.47.108.0/2410.47.108.1 – 10.47.108.25410.47.108.255
4610.47.109.0/2410.47.109.1 – 10.47.109.25410.47.109.255
4710.47.110.0/2410.47.110.1 – 10.47.110.25410.47.110.255
4810.47.111.0/2410.47.111.1 – 10.47.111.25410.47.111.255
4910.47.112.0/2410.47.112.1 – 10.47.112.25410.47.112.255
5010.47.113.0/2410.47.113.1 – 10.47.113.25410.47.113.255
5110.47.114.0/2410.47.114.1 – 10.47.114.25410.47.114.255
5210.47.115.0/2410.47.115.1 – 10.47.115.25410.47.115.255
5310.47.116.0/2410.47.116.1 – 10.47.116.25410.47.116.255
5410.47.117.0/2410.47.117.1 – 10.47.117.25410.47.117.255
5510.47.118.0/2410.47.118.1 – 10.47.118.25410.47.118.255
5610.47.119.0/2410.47.119.1 – 10.47.119.25410.47.119.255
5710.47.120.0/2410.47.120.1 – 10.47.120.25410.47.120.255
5810.47.121.0/2410.47.121.1 – 10.47.121.25410.47.121.255
5910.47.122.0/2410.47.122.1 – 10.47.122.25410.47.122.255
6010.47.123.0/2410.47.123.1 – 10.47.123.25410.47.123.255
6110.47.124.0/2410.47.124.1 – 10.47.124.25410.47.124.255
6210.47.125.0/2410.47.125.1 – 10.47.125.25410.47.125.255
6310.47.126.0/2410.47.126.1 – 10.47.126.25410.47.126.255
6410.47.127.0/2410.47.127.1 – 10.47.127.25410.47.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →