ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.46.167.192/26
network10.46.167.192/26
broadcast10.46.167.255
first host10.46.167.193
last host10.46.167.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.46.167.192/26
address00001010.00101110.10100111.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00101110.10100111.11000000
broadcast00001010.00101110.10100111.11111111
green = network part, grey = host part
hex0x0a2ea7c0
decimal170829760
reverse dns192.167.46.10.in-addr.arpa
ipv4-mapped::ffff:a2e:a7c0

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.46.167.192/3110.46.167.192 – 10.46.167.19310.46.167.193
210.46.167.194/3110.46.167.194 – 10.46.167.19510.46.167.195
310.46.167.196/3110.46.167.196 – 10.46.167.19710.46.167.197
410.46.167.198/3110.46.167.198 – 10.46.167.19910.46.167.199
510.46.167.200/3110.46.167.200 – 10.46.167.20110.46.167.201
610.46.167.202/3110.46.167.202 – 10.46.167.20310.46.167.203
710.46.167.204/3110.46.167.204 – 10.46.167.20510.46.167.205
810.46.167.206/3110.46.167.206 – 10.46.167.20710.46.167.207
910.46.167.208/3110.46.167.208 – 10.46.167.20910.46.167.209
1010.46.167.210/3110.46.167.210 – 10.46.167.21110.46.167.211
1110.46.167.212/3110.46.167.212 – 10.46.167.21310.46.167.213
1210.46.167.214/3110.46.167.214 – 10.46.167.21510.46.167.215
1310.46.167.216/3110.46.167.216 – 10.46.167.21710.46.167.217
1410.46.167.218/3110.46.167.218 – 10.46.167.21910.46.167.219
1510.46.167.220/3110.46.167.220 – 10.46.167.22110.46.167.221
1610.46.167.222/3110.46.167.222 – 10.46.167.22310.46.167.223
1710.46.167.224/3110.46.167.224 – 10.46.167.22510.46.167.225
1810.46.167.226/3110.46.167.226 – 10.46.167.22710.46.167.227
1910.46.167.228/3110.46.167.228 – 10.46.167.22910.46.167.229
2010.46.167.230/3110.46.167.230 – 10.46.167.23110.46.167.231
2110.46.167.232/3110.46.167.232 – 10.46.167.23310.46.167.233
2210.46.167.234/3110.46.167.234 – 10.46.167.23510.46.167.235
2310.46.167.236/3110.46.167.236 – 10.46.167.23710.46.167.237
2410.46.167.238/3110.46.167.238 – 10.46.167.23910.46.167.239
2510.46.167.240/3110.46.167.240 – 10.46.167.24110.46.167.241
2610.46.167.242/3110.46.167.242 – 10.46.167.24310.46.167.243
2710.46.167.244/3110.46.167.244 – 10.46.167.24510.46.167.245
2810.46.167.246/3110.46.167.246 – 10.46.167.24710.46.167.247
2910.46.167.248/3110.46.167.248 – 10.46.167.24910.46.167.249
3010.46.167.250/3110.46.167.250 – 10.46.167.25110.46.167.251
3110.46.167.252/3110.46.167.252 – 10.46.167.25310.46.167.253
3210.46.167.254/3110.46.167.254 – 10.46.167.25510.46.167.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →