ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.46.167.0/24
network10.46.167.0/24
broadcast10.46.167.255
first host10.46.167.1
last host10.46.167.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.46.167.0/24
address00001010.00101110.10100111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00101110.10100111.00000000
broadcast00001010.00101110.10100111.11111111
green = network part, grey = host part
hex0x0a2ea700
decimal170829568
reverse dns0.167.46.10.in-addr.arpa
ipv4-mapped::ffff:a2e:a700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.46.167.0/3010.46.167.1 – 10.46.167.210.46.167.3
210.46.167.4/3010.46.167.5 – 10.46.167.610.46.167.7
310.46.167.8/3010.46.167.9 – 10.46.167.1010.46.167.11
410.46.167.12/3010.46.167.13 – 10.46.167.1410.46.167.15
510.46.167.16/3010.46.167.17 – 10.46.167.1810.46.167.19
610.46.167.20/3010.46.167.21 – 10.46.167.2210.46.167.23
710.46.167.24/3010.46.167.25 – 10.46.167.2610.46.167.27
810.46.167.28/3010.46.167.29 – 10.46.167.3010.46.167.31
910.46.167.32/3010.46.167.33 – 10.46.167.3410.46.167.35
1010.46.167.36/3010.46.167.37 – 10.46.167.3810.46.167.39
1110.46.167.40/3010.46.167.41 – 10.46.167.4210.46.167.43
1210.46.167.44/3010.46.167.45 – 10.46.167.4610.46.167.47
1310.46.167.48/3010.46.167.49 – 10.46.167.5010.46.167.51
1410.46.167.52/3010.46.167.53 – 10.46.167.5410.46.167.55
1510.46.167.56/3010.46.167.57 – 10.46.167.5810.46.167.59
1610.46.167.60/3010.46.167.61 – 10.46.167.6210.46.167.63
1710.46.167.64/3010.46.167.65 – 10.46.167.6610.46.167.67
1810.46.167.68/3010.46.167.69 – 10.46.167.7010.46.167.71
1910.46.167.72/3010.46.167.73 – 10.46.167.7410.46.167.75
2010.46.167.76/3010.46.167.77 – 10.46.167.7810.46.167.79
2110.46.167.80/3010.46.167.81 – 10.46.167.8210.46.167.83
2210.46.167.84/3010.46.167.85 – 10.46.167.8610.46.167.87
2310.46.167.88/3010.46.167.89 – 10.46.167.9010.46.167.91
2410.46.167.92/3010.46.167.93 – 10.46.167.9410.46.167.95
2510.46.167.96/3010.46.167.97 – 10.46.167.9810.46.167.99
2610.46.167.100/3010.46.167.101 – 10.46.167.10210.46.167.103
2710.46.167.104/3010.46.167.105 – 10.46.167.10610.46.167.107
2810.46.167.108/3010.46.167.109 – 10.46.167.11010.46.167.111
2910.46.167.112/3010.46.167.113 – 10.46.167.11410.46.167.115
3010.46.167.116/3010.46.167.117 – 10.46.167.11810.46.167.119
3110.46.167.120/3010.46.167.121 – 10.46.167.12210.46.167.123
3210.46.167.124/3010.46.167.125 – 10.46.167.12610.46.167.127
3310.46.167.128/3010.46.167.129 – 10.46.167.13010.46.167.131
3410.46.167.132/3010.46.167.133 – 10.46.167.13410.46.167.135
3510.46.167.136/3010.46.167.137 – 10.46.167.13810.46.167.139
3610.46.167.140/3010.46.167.141 – 10.46.167.14210.46.167.143
3710.46.167.144/3010.46.167.145 – 10.46.167.14610.46.167.147
3810.46.167.148/3010.46.167.149 – 10.46.167.15010.46.167.151
3910.46.167.152/3010.46.167.153 – 10.46.167.15410.46.167.155
4010.46.167.156/3010.46.167.157 – 10.46.167.15810.46.167.159
4110.46.167.160/3010.46.167.161 – 10.46.167.16210.46.167.163
4210.46.167.164/3010.46.167.165 – 10.46.167.16610.46.167.167
4310.46.167.168/3010.46.167.169 – 10.46.167.17010.46.167.171
4410.46.167.172/3010.46.167.173 – 10.46.167.17410.46.167.175
4510.46.167.176/3010.46.167.177 – 10.46.167.17810.46.167.179
4610.46.167.180/3010.46.167.181 – 10.46.167.18210.46.167.183
4710.46.167.184/3010.46.167.185 – 10.46.167.18610.46.167.187
4810.46.167.188/3010.46.167.189 – 10.46.167.19010.46.167.191
4910.46.167.192/3010.46.167.193 – 10.46.167.19410.46.167.195
5010.46.167.196/3010.46.167.197 – 10.46.167.19810.46.167.199
5110.46.167.200/3010.46.167.201 – 10.46.167.20210.46.167.203
5210.46.167.204/3010.46.167.205 – 10.46.167.20610.46.167.207
5310.46.167.208/3010.46.167.209 – 10.46.167.21010.46.167.211
5410.46.167.212/3010.46.167.213 – 10.46.167.21410.46.167.215
5510.46.167.216/3010.46.167.217 – 10.46.167.21810.46.167.219
5610.46.167.220/3010.46.167.221 – 10.46.167.22210.46.167.223
5710.46.167.224/3010.46.167.225 – 10.46.167.22610.46.167.227
5810.46.167.228/3010.46.167.229 – 10.46.167.23010.46.167.231
5910.46.167.232/3010.46.167.233 – 10.46.167.23410.46.167.235
6010.46.167.236/3010.46.167.237 – 10.46.167.23810.46.167.239
6110.46.167.240/3010.46.167.241 – 10.46.167.24210.46.167.243
6210.46.167.244/3010.46.167.245 – 10.46.167.24610.46.167.247
6310.46.167.248/3010.46.167.249 – 10.46.167.25010.46.167.251
6410.46.167.252/3010.46.167.253 – 10.46.167.25410.46.167.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →