ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.46.147.0/26
network10.46.147.0/26
broadcast10.46.147.63
first host10.46.147.1
last host10.46.147.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.46.147.0/26
address00001010.00101110.10010011.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00101110.10010011.00000000
broadcast00001010.00101110.10010011.00111111
green = network part, grey = host part
hex0x0a2e9300
decimal170824448
reverse dns0.147.46.10.in-addr.arpa
ipv4-mapped::ffff:a2e:9300

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.46.147.0/3210.46.147.0 – 10.46.147.010.46.147.0
210.46.147.1/3210.46.147.1 – 10.46.147.110.46.147.1
310.46.147.2/3210.46.147.2 – 10.46.147.210.46.147.2
410.46.147.3/3210.46.147.3 – 10.46.147.310.46.147.3
510.46.147.4/3210.46.147.4 – 10.46.147.410.46.147.4
610.46.147.5/3210.46.147.5 – 10.46.147.510.46.147.5
710.46.147.6/3210.46.147.6 – 10.46.147.610.46.147.6
810.46.147.7/3210.46.147.7 – 10.46.147.710.46.147.7
910.46.147.8/3210.46.147.8 – 10.46.147.810.46.147.8
1010.46.147.9/3210.46.147.9 – 10.46.147.910.46.147.9
1110.46.147.10/3210.46.147.10 – 10.46.147.1010.46.147.10
1210.46.147.11/3210.46.147.11 – 10.46.147.1110.46.147.11
1310.46.147.12/3210.46.147.12 – 10.46.147.1210.46.147.12
1410.46.147.13/3210.46.147.13 – 10.46.147.1310.46.147.13
1510.46.147.14/3210.46.147.14 – 10.46.147.1410.46.147.14
1610.46.147.15/3210.46.147.15 – 10.46.147.1510.46.147.15
1710.46.147.16/3210.46.147.16 – 10.46.147.1610.46.147.16
1810.46.147.17/3210.46.147.17 – 10.46.147.1710.46.147.17
1910.46.147.18/3210.46.147.18 – 10.46.147.1810.46.147.18
2010.46.147.19/3210.46.147.19 – 10.46.147.1910.46.147.19
2110.46.147.20/3210.46.147.20 – 10.46.147.2010.46.147.20
2210.46.147.21/3210.46.147.21 – 10.46.147.2110.46.147.21
2310.46.147.22/3210.46.147.22 – 10.46.147.2210.46.147.22
2410.46.147.23/3210.46.147.23 – 10.46.147.2310.46.147.23
2510.46.147.24/3210.46.147.24 – 10.46.147.2410.46.147.24
2610.46.147.25/3210.46.147.25 – 10.46.147.2510.46.147.25
2710.46.147.26/3210.46.147.26 – 10.46.147.2610.46.147.26
2810.46.147.27/3210.46.147.27 – 10.46.147.2710.46.147.27
2910.46.147.28/3210.46.147.28 – 10.46.147.2810.46.147.28
3010.46.147.29/3210.46.147.29 – 10.46.147.2910.46.147.29
3110.46.147.30/3210.46.147.30 – 10.46.147.3010.46.147.30
3210.46.147.31/3210.46.147.31 – 10.46.147.3110.46.147.31
3310.46.147.32/3210.46.147.32 – 10.46.147.3210.46.147.32
3410.46.147.33/3210.46.147.33 – 10.46.147.3310.46.147.33
3510.46.147.34/3210.46.147.34 – 10.46.147.3410.46.147.34
3610.46.147.35/3210.46.147.35 – 10.46.147.3510.46.147.35
3710.46.147.36/3210.46.147.36 – 10.46.147.3610.46.147.36
3810.46.147.37/3210.46.147.37 – 10.46.147.3710.46.147.37
3910.46.147.38/3210.46.147.38 – 10.46.147.3810.46.147.38
4010.46.147.39/3210.46.147.39 – 10.46.147.3910.46.147.39
4110.46.147.40/3210.46.147.40 – 10.46.147.4010.46.147.40
4210.46.147.41/3210.46.147.41 – 10.46.147.4110.46.147.41
4310.46.147.42/3210.46.147.42 – 10.46.147.4210.46.147.42
4410.46.147.43/3210.46.147.43 – 10.46.147.4310.46.147.43
4510.46.147.44/3210.46.147.44 – 10.46.147.4410.46.147.44
4610.46.147.45/3210.46.147.45 – 10.46.147.4510.46.147.45
4710.46.147.46/3210.46.147.46 – 10.46.147.4610.46.147.46
4810.46.147.47/3210.46.147.47 – 10.46.147.4710.46.147.47
4910.46.147.48/3210.46.147.48 – 10.46.147.4810.46.147.48
5010.46.147.49/3210.46.147.49 – 10.46.147.4910.46.147.49
5110.46.147.50/3210.46.147.50 – 10.46.147.5010.46.147.50
5210.46.147.51/3210.46.147.51 – 10.46.147.5110.46.147.51
5310.46.147.52/3210.46.147.52 – 10.46.147.5210.46.147.52
5410.46.147.53/3210.46.147.53 – 10.46.147.5310.46.147.53
5510.46.147.54/3210.46.147.54 – 10.46.147.5410.46.147.54
5610.46.147.55/3210.46.147.55 – 10.46.147.5510.46.147.55
5710.46.147.56/3210.46.147.56 – 10.46.147.5610.46.147.56
5810.46.147.57/3210.46.147.57 – 10.46.147.5710.46.147.57
5910.46.147.58/3210.46.147.58 – 10.46.147.5810.46.147.58
6010.46.147.59/3210.46.147.59 – 10.46.147.5910.46.147.59
6110.46.147.60/3210.46.147.60 – 10.46.147.6010.46.147.60
6210.46.147.61/3210.46.147.61 – 10.46.147.6110.46.147.61
6310.46.147.62/3210.46.147.62 – 10.46.147.6210.46.147.62
6410.46.147.63/3210.46.147.63 – 10.46.147.6310.46.147.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →