ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.46.136.0/22
network10.46.136.0/22
broadcast10.46.139.255
first host10.46.136.1
last host10.46.139.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.46.136.0/22
address00001010.00101110.10001000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00101110.10001000.00000000
broadcast00001010.00101110.10001011.11111111
green = network part, grey = host part
hex0x0a2e8800
decimal170821632
reverse dns0.136.46.10.in-addr.arpa
ipv4-mapped::ffff:a2e:8800

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.46.136.0/2810.46.136.1 – 10.46.136.1410.46.136.15
210.46.136.16/2810.46.136.17 – 10.46.136.3010.46.136.31
310.46.136.32/2810.46.136.33 – 10.46.136.4610.46.136.47
410.46.136.48/2810.46.136.49 – 10.46.136.6210.46.136.63
510.46.136.64/2810.46.136.65 – 10.46.136.7810.46.136.79
610.46.136.80/2810.46.136.81 – 10.46.136.9410.46.136.95
710.46.136.96/2810.46.136.97 – 10.46.136.11010.46.136.111
810.46.136.112/2810.46.136.113 – 10.46.136.12610.46.136.127
910.46.136.128/2810.46.136.129 – 10.46.136.14210.46.136.143
1010.46.136.144/2810.46.136.145 – 10.46.136.15810.46.136.159
1110.46.136.160/2810.46.136.161 – 10.46.136.17410.46.136.175
1210.46.136.176/2810.46.136.177 – 10.46.136.19010.46.136.191
1310.46.136.192/2810.46.136.193 – 10.46.136.20610.46.136.207
1410.46.136.208/2810.46.136.209 – 10.46.136.22210.46.136.223
1510.46.136.224/2810.46.136.225 – 10.46.136.23810.46.136.239
1610.46.136.240/2810.46.136.241 – 10.46.136.25410.46.136.255
1710.46.137.0/2810.46.137.1 – 10.46.137.1410.46.137.15
1810.46.137.16/2810.46.137.17 – 10.46.137.3010.46.137.31
1910.46.137.32/2810.46.137.33 – 10.46.137.4610.46.137.47
2010.46.137.48/2810.46.137.49 – 10.46.137.6210.46.137.63
2110.46.137.64/2810.46.137.65 – 10.46.137.7810.46.137.79
2210.46.137.80/2810.46.137.81 – 10.46.137.9410.46.137.95
2310.46.137.96/2810.46.137.97 – 10.46.137.11010.46.137.111
2410.46.137.112/2810.46.137.113 – 10.46.137.12610.46.137.127
2510.46.137.128/2810.46.137.129 – 10.46.137.14210.46.137.143
2610.46.137.144/2810.46.137.145 – 10.46.137.15810.46.137.159
2710.46.137.160/2810.46.137.161 – 10.46.137.17410.46.137.175
2810.46.137.176/2810.46.137.177 – 10.46.137.19010.46.137.191
2910.46.137.192/2810.46.137.193 – 10.46.137.20610.46.137.207
3010.46.137.208/2810.46.137.209 – 10.46.137.22210.46.137.223
3110.46.137.224/2810.46.137.225 – 10.46.137.23810.46.137.239
3210.46.137.240/2810.46.137.241 – 10.46.137.25410.46.137.255
3310.46.138.0/2810.46.138.1 – 10.46.138.1410.46.138.15
3410.46.138.16/2810.46.138.17 – 10.46.138.3010.46.138.31
3510.46.138.32/2810.46.138.33 – 10.46.138.4610.46.138.47
3610.46.138.48/2810.46.138.49 – 10.46.138.6210.46.138.63
3710.46.138.64/2810.46.138.65 – 10.46.138.7810.46.138.79
3810.46.138.80/2810.46.138.81 – 10.46.138.9410.46.138.95
3910.46.138.96/2810.46.138.97 – 10.46.138.11010.46.138.111
4010.46.138.112/2810.46.138.113 – 10.46.138.12610.46.138.127
4110.46.138.128/2810.46.138.129 – 10.46.138.14210.46.138.143
4210.46.138.144/2810.46.138.145 – 10.46.138.15810.46.138.159
4310.46.138.160/2810.46.138.161 – 10.46.138.17410.46.138.175
4410.46.138.176/2810.46.138.177 – 10.46.138.19010.46.138.191
4510.46.138.192/2810.46.138.193 – 10.46.138.20610.46.138.207
4610.46.138.208/2810.46.138.209 – 10.46.138.22210.46.138.223
4710.46.138.224/2810.46.138.225 – 10.46.138.23810.46.138.239
4810.46.138.240/2810.46.138.241 – 10.46.138.25410.46.138.255
4910.46.139.0/2810.46.139.1 – 10.46.139.1410.46.139.15
5010.46.139.16/2810.46.139.17 – 10.46.139.3010.46.139.31
5110.46.139.32/2810.46.139.33 – 10.46.139.4610.46.139.47
5210.46.139.48/2810.46.139.49 – 10.46.139.6210.46.139.63
5310.46.139.64/2810.46.139.65 – 10.46.139.7810.46.139.79
5410.46.139.80/2810.46.139.81 – 10.46.139.9410.46.139.95
5510.46.139.96/2810.46.139.97 – 10.46.139.11010.46.139.111
5610.46.139.112/2810.46.139.113 – 10.46.139.12610.46.139.127
5710.46.139.128/2810.46.139.129 – 10.46.139.14210.46.139.143
5810.46.139.144/2810.46.139.145 – 10.46.139.15810.46.139.159
5910.46.139.160/2810.46.139.161 – 10.46.139.17410.46.139.175
6010.46.139.176/2810.46.139.177 – 10.46.139.19010.46.139.191
6110.46.139.192/2810.46.139.193 – 10.46.139.20610.46.139.207
6210.46.139.208/2810.46.139.209 – 10.46.139.22210.46.139.223
6310.46.139.224/2810.46.139.225 – 10.46.139.23810.46.139.239
6410.46.139.240/2810.46.139.241 – 10.46.139.25410.46.139.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →