ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.45.34.0/26
network10.45.34.0/26
broadcast10.45.34.63
first host10.45.34.1
last host10.45.34.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.45.34.0/26
address00001010.00101101.00100010.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00101101.00100010.00000000
broadcast00001010.00101101.00100010.00111111
green = network part, grey = host part
hex0x0a2d2200
decimal170729984
reverse dns0.34.45.10.in-addr.arpa
ipv4-mapped::ffff:a2d:2200

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.45.34.0/3110.45.34.0 – 10.45.34.110.45.34.1
210.45.34.2/3110.45.34.2 – 10.45.34.310.45.34.3
310.45.34.4/3110.45.34.4 – 10.45.34.510.45.34.5
410.45.34.6/3110.45.34.6 – 10.45.34.710.45.34.7
510.45.34.8/3110.45.34.8 – 10.45.34.910.45.34.9
610.45.34.10/3110.45.34.10 – 10.45.34.1110.45.34.11
710.45.34.12/3110.45.34.12 – 10.45.34.1310.45.34.13
810.45.34.14/3110.45.34.14 – 10.45.34.1510.45.34.15
910.45.34.16/3110.45.34.16 – 10.45.34.1710.45.34.17
1010.45.34.18/3110.45.34.18 – 10.45.34.1910.45.34.19
1110.45.34.20/3110.45.34.20 – 10.45.34.2110.45.34.21
1210.45.34.22/3110.45.34.22 – 10.45.34.2310.45.34.23
1310.45.34.24/3110.45.34.24 – 10.45.34.2510.45.34.25
1410.45.34.26/3110.45.34.26 – 10.45.34.2710.45.34.27
1510.45.34.28/3110.45.34.28 – 10.45.34.2910.45.34.29
1610.45.34.30/3110.45.34.30 – 10.45.34.3110.45.34.31
1710.45.34.32/3110.45.34.32 – 10.45.34.3310.45.34.33
1810.45.34.34/3110.45.34.34 – 10.45.34.3510.45.34.35
1910.45.34.36/3110.45.34.36 – 10.45.34.3710.45.34.37
2010.45.34.38/3110.45.34.38 – 10.45.34.3910.45.34.39
2110.45.34.40/3110.45.34.40 – 10.45.34.4110.45.34.41
2210.45.34.42/3110.45.34.42 – 10.45.34.4310.45.34.43
2310.45.34.44/3110.45.34.44 – 10.45.34.4510.45.34.45
2410.45.34.46/3110.45.34.46 – 10.45.34.4710.45.34.47
2510.45.34.48/3110.45.34.48 – 10.45.34.4910.45.34.49
2610.45.34.50/3110.45.34.50 – 10.45.34.5110.45.34.51
2710.45.34.52/3110.45.34.52 – 10.45.34.5310.45.34.53
2810.45.34.54/3110.45.34.54 – 10.45.34.5510.45.34.55
2910.45.34.56/3110.45.34.56 – 10.45.34.5710.45.34.57
3010.45.34.58/3110.45.34.58 – 10.45.34.5910.45.34.59
3110.45.34.60/3110.45.34.60 – 10.45.34.6110.45.34.61
3210.45.34.62/3110.45.34.62 – 10.45.34.6310.45.34.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →