ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.44.64.0/18
network10.44.64.0/18
broadcast10.44.127.255
first host10.44.64.1
last host10.44.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.44.64.0/18
address00001010.00101100.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00101100.01000000.00000000
broadcast00001010.00101100.01111111.11111111
green = network part, grey = host part
hex0x0a2c4000
decimal170672128
reverse dns0.64.44.10.in-addr.arpa
ipv4-mapped::ffff:a2c:4000

/18 split into /23 · 32 subnets

close ×
#networkhost rangebroadcast
110.44.64.0/2310.44.64.1 – 10.44.65.25410.44.65.255
210.44.66.0/2310.44.66.1 – 10.44.67.25410.44.67.255
310.44.68.0/2310.44.68.1 – 10.44.69.25410.44.69.255
410.44.70.0/2310.44.70.1 – 10.44.71.25410.44.71.255
510.44.72.0/2310.44.72.1 – 10.44.73.25410.44.73.255
610.44.74.0/2310.44.74.1 – 10.44.75.25410.44.75.255
710.44.76.0/2310.44.76.1 – 10.44.77.25410.44.77.255
810.44.78.0/2310.44.78.1 – 10.44.79.25410.44.79.255
910.44.80.0/2310.44.80.1 – 10.44.81.25410.44.81.255
1010.44.82.0/2310.44.82.1 – 10.44.83.25410.44.83.255
1110.44.84.0/2310.44.84.1 – 10.44.85.25410.44.85.255
1210.44.86.0/2310.44.86.1 – 10.44.87.25410.44.87.255
1310.44.88.0/2310.44.88.1 – 10.44.89.25410.44.89.255
1410.44.90.0/2310.44.90.1 – 10.44.91.25410.44.91.255
1510.44.92.0/2310.44.92.1 – 10.44.93.25410.44.93.255
1610.44.94.0/2310.44.94.1 – 10.44.95.25410.44.95.255
1710.44.96.0/2310.44.96.1 – 10.44.97.25410.44.97.255
1810.44.98.0/2310.44.98.1 – 10.44.99.25410.44.99.255
1910.44.100.0/2310.44.100.1 – 10.44.101.25410.44.101.255
2010.44.102.0/2310.44.102.1 – 10.44.103.25410.44.103.255
2110.44.104.0/2310.44.104.1 – 10.44.105.25410.44.105.255
2210.44.106.0/2310.44.106.1 – 10.44.107.25410.44.107.255
2310.44.108.0/2310.44.108.1 – 10.44.109.25410.44.109.255
2410.44.110.0/2310.44.110.1 – 10.44.111.25410.44.111.255
2510.44.112.0/2310.44.112.1 – 10.44.113.25410.44.113.255
2610.44.114.0/2310.44.114.1 – 10.44.115.25410.44.115.255
2710.44.116.0/2310.44.116.1 – 10.44.117.25410.44.117.255
2810.44.118.0/2310.44.118.1 – 10.44.119.25410.44.119.255
2910.44.120.0/2310.44.120.1 – 10.44.121.25410.44.121.255
3010.44.122.0/2310.44.122.1 – 10.44.123.25410.44.123.255
3110.44.124.0/2310.44.124.1 – 10.44.125.25410.44.125.255
3210.44.126.0/2310.44.126.1 – 10.44.127.25410.44.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →