ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.41.89.0/24
network10.41.89.0/24
broadcast10.41.89.255
first host10.41.89.1
last host10.41.89.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.41.89.0/24
address00001010.00101001.01011001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00101001.01011001.00000000
broadcast00001010.00101001.01011001.11111111
green = network part, grey = host part
hex0x0a295900
decimal170481920
reverse dns0.89.41.10.in-addr.arpa
ipv4-mapped::ffff:a29:5900

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.41.89.0/2910.41.89.1 – 10.41.89.610.41.89.7
210.41.89.8/2910.41.89.9 – 10.41.89.1410.41.89.15
310.41.89.16/2910.41.89.17 – 10.41.89.2210.41.89.23
410.41.89.24/2910.41.89.25 – 10.41.89.3010.41.89.31
510.41.89.32/2910.41.89.33 – 10.41.89.3810.41.89.39
610.41.89.40/2910.41.89.41 – 10.41.89.4610.41.89.47
710.41.89.48/2910.41.89.49 – 10.41.89.5410.41.89.55
810.41.89.56/2910.41.89.57 – 10.41.89.6210.41.89.63
910.41.89.64/2910.41.89.65 – 10.41.89.7010.41.89.71
1010.41.89.72/2910.41.89.73 – 10.41.89.7810.41.89.79
1110.41.89.80/2910.41.89.81 – 10.41.89.8610.41.89.87
1210.41.89.88/2910.41.89.89 – 10.41.89.9410.41.89.95
1310.41.89.96/2910.41.89.97 – 10.41.89.10210.41.89.103
1410.41.89.104/2910.41.89.105 – 10.41.89.11010.41.89.111
1510.41.89.112/2910.41.89.113 – 10.41.89.11810.41.89.119
1610.41.89.120/2910.41.89.121 – 10.41.89.12610.41.89.127
1710.41.89.128/2910.41.89.129 – 10.41.89.13410.41.89.135
1810.41.89.136/2910.41.89.137 – 10.41.89.14210.41.89.143
1910.41.89.144/2910.41.89.145 – 10.41.89.15010.41.89.151
2010.41.89.152/2910.41.89.153 – 10.41.89.15810.41.89.159
2110.41.89.160/2910.41.89.161 – 10.41.89.16610.41.89.167
2210.41.89.168/2910.41.89.169 – 10.41.89.17410.41.89.175
2310.41.89.176/2910.41.89.177 – 10.41.89.18210.41.89.183
2410.41.89.184/2910.41.89.185 – 10.41.89.19010.41.89.191
2510.41.89.192/2910.41.89.193 – 10.41.89.19810.41.89.199
2610.41.89.200/2910.41.89.201 – 10.41.89.20610.41.89.207
2710.41.89.208/2910.41.89.209 – 10.41.89.21410.41.89.215
2810.41.89.216/2910.41.89.217 – 10.41.89.22210.41.89.223
2910.41.89.224/2910.41.89.225 – 10.41.89.23010.41.89.231
3010.41.89.232/2910.41.89.233 – 10.41.89.23810.41.89.239
3110.41.89.240/2910.41.89.241 – 10.41.89.24610.41.89.247
3210.41.89.248/2910.41.89.249 – 10.41.89.25410.41.89.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →