ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.41.64.0/18
network10.41.64.0/18
broadcast10.41.127.255
first host10.41.64.1
last host10.41.127.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.41.64.0/18
address00001010.00101001.01000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00101001.01000000.00000000
broadcast00001010.00101001.01111111.11111111
green = network part, grey = host part
hex0x0a294000
decimal170475520
reverse dns0.64.41.10.in-addr.arpa
ipv4-mapped::ffff:a29:4000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.41.64.0/2410.41.64.1 – 10.41.64.25410.41.64.255
210.41.65.0/2410.41.65.1 – 10.41.65.25410.41.65.255
310.41.66.0/2410.41.66.1 – 10.41.66.25410.41.66.255
410.41.67.0/2410.41.67.1 – 10.41.67.25410.41.67.255
510.41.68.0/2410.41.68.1 – 10.41.68.25410.41.68.255
610.41.69.0/2410.41.69.1 – 10.41.69.25410.41.69.255
710.41.70.0/2410.41.70.1 – 10.41.70.25410.41.70.255
810.41.71.0/2410.41.71.1 – 10.41.71.25410.41.71.255
910.41.72.0/2410.41.72.1 – 10.41.72.25410.41.72.255
1010.41.73.0/2410.41.73.1 – 10.41.73.25410.41.73.255
1110.41.74.0/2410.41.74.1 – 10.41.74.25410.41.74.255
1210.41.75.0/2410.41.75.1 – 10.41.75.25410.41.75.255
1310.41.76.0/2410.41.76.1 – 10.41.76.25410.41.76.255
1410.41.77.0/2410.41.77.1 – 10.41.77.25410.41.77.255
1510.41.78.0/2410.41.78.1 – 10.41.78.25410.41.78.255
1610.41.79.0/2410.41.79.1 – 10.41.79.25410.41.79.255
1710.41.80.0/2410.41.80.1 – 10.41.80.25410.41.80.255
1810.41.81.0/2410.41.81.1 – 10.41.81.25410.41.81.255
1910.41.82.0/2410.41.82.1 – 10.41.82.25410.41.82.255
2010.41.83.0/2410.41.83.1 – 10.41.83.25410.41.83.255
2110.41.84.0/2410.41.84.1 – 10.41.84.25410.41.84.255
2210.41.85.0/2410.41.85.1 – 10.41.85.25410.41.85.255
2310.41.86.0/2410.41.86.1 – 10.41.86.25410.41.86.255
2410.41.87.0/2410.41.87.1 – 10.41.87.25410.41.87.255
2510.41.88.0/2410.41.88.1 – 10.41.88.25410.41.88.255
2610.41.89.0/2410.41.89.1 – 10.41.89.25410.41.89.255
2710.41.90.0/2410.41.90.1 – 10.41.90.25410.41.90.255
2810.41.91.0/2410.41.91.1 – 10.41.91.25410.41.91.255
2910.41.92.0/2410.41.92.1 – 10.41.92.25410.41.92.255
3010.41.93.0/2410.41.93.1 – 10.41.93.25410.41.93.255
3110.41.94.0/2410.41.94.1 – 10.41.94.25410.41.94.255
3210.41.95.0/2410.41.95.1 – 10.41.95.25410.41.95.255
3310.41.96.0/2410.41.96.1 – 10.41.96.25410.41.96.255
3410.41.97.0/2410.41.97.1 – 10.41.97.25410.41.97.255
3510.41.98.0/2410.41.98.1 – 10.41.98.25410.41.98.255
3610.41.99.0/2410.41.99.1 – 10.41.99.25410.41.99.255
3710.41.100.0/2410.41.100.1 – 10.41.100.25410.41.100.255
3810.41.101.0/2410.41.101.1 – 10.41.101.25410.41.101.255
3910.41.102.0/2410.41.102.1 – 10.41.102.25410.41.102.255
4010.41.103.0/2410.41.103.1 – 10.41.103.25410.41.103.255
4110.41.104.0/2410.41.104.1 – 10.41.104.25410.41.104.255
4210.41.105.0/2410.41.105.1 – 10.41.105.25410.41.105.255
4310.41.106.0/2410.41.106.1 – 10.41.106.25410.41.106.255
4410.41.107.0/2410.41.107.1 – 10.41.107.25410.41.107.255
4510.41.108.0/2410.41.108.1 – 10.41.108.25410.41.108.255
4610.41.109.0/2410.41.109.1 – 10.41.109.25410.41.109.255
4710.41.110.0/2410.41.110.1 – 10.41.110.25410.41.110.255
4810.41.111.0/2410.41.111.1 – 10.41.111.25410.41.111.255
4910.41.112.0/2410.41.112.1 – 10.41.112.25410.41.112.255
5010.41.113.0/2410.41.113.1 – 10.41.113.25410.41.113.255
5110.41.114.0/2410.41.114.1 – 10.41.114.25410.41.114.255
5210.41.115.0/2410.41.115.1 – 10.41.115.25410.41.115.255
5310.41.116.0/2410.41.116.1 – 10.41.116.25410.41.116.255
5410.41.117.0/2410.41.117.1 – 10.41.117.25410.41.117.255
5510.41.118.0/2410.41.118.1 – 10.41.118.25410.41.118.255
5610.41.119.0/2410.41.119.1 – 10.41.119.25410.41.119.255
5710.41.120.0/2410.41.120.1 – 10.41.120.25410.41.120.255
5810.41.121.0/2410.41.121.1 – 10.41.121.25410.41.121.255
5910.41.122.0/2410.41.122.1 – 10.41.122.25410.41.122.255
6010.41.123.0/2410.41.123.1 – 10.41.123.25410.41.123.255
6110.41.124.0/2410.41.124.1 – 10.41.124.25410.41.124.255
6210.41.125.0/2410.41.125.1 – 10.41.125.25410.41.125.255
6310.41.126.0/2410.41.126.1 – 10.41.126.25410.41.126.255
6410.41.127.0/2410.41.127.1 – 10.41.127.25410.41.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →