ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.41.128.0/17
network10.41.128.0/17
broadcast10.41.255.255
first host10.41.128.1
last host10.41.255.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.41.128.0/17
address00001010.00101001.10000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.00101001.10000000.00000000
broadcast00001010.00101001.11111111.11111111
green = network part, grey = host part
hex0x0a298000
decimal170491904
reverse dns0.128.41.10.in-addr.arpa
ipv4-mapped::ffff:a29:8000

/17 split into /23 · 64 subnets

close ×
#networkhost rangebroadcast
110.41.128.0/2310.41.128.1 – 10.41.129.25410.41.129.255
210.41.130.0/2310.41.130.1 – 10.41.131.25410.41.131.255
310.41.132.0/2310.41.132.1 – 10.41.133.25410.41.133.255
410.41.134.0/2310.41.134.1 – 10.41.135.25410.41.135.255
510.41.136.0/2310.41.136.1 – 10.41.137.25410.41.137.255
610.41.138.0/2310.41.138.1 – 10.41.139.25410.41.139.255
710.41.140.0/2310.41.140.1 – 10.41.141.25410.41.141.255
810.41.142.0/2310.41.142.1 – 10.41.143.25410.41.143.255
910.41.144.0/2310.41.144.1 – 10.41.145.25410.41.145.255
1010.41.146.0/2310.41.146.1 – 10.41.147.25410.41.147.255
1110.41.148.0/2310.41.148.1 – 10.41.149.25410.41.149.255
1210.41.150.0/2310.41.150.1 – 10.41.151.25410.41.151.255
1310.41.152.0/2310.41.152.1 – 10.41.153.25410.41.153.255
1410.41.154.0/2310.41.154.1 – 10.41.155.25410.41.155.255
1510.41.156.0/2310.41.156.1 – 10.41.157.25410.41.157.255
1610.41.158.0/2310.41.158.1 – 10.41.159.25410.41.159.255
1710.41.160.0/2310.41.160.1 – 10.41.161.25410.41.161.255
1810.41.162.0/2310.41.162.1 – 10.41.163.25410.41.163.255
1910.41.164.0/2310.41.164.1 – 10.41.165.25410.41.165.255
2010.41.166.0/2310.41.166.1 – 10.41.167.25410.41.167.255
2110.41.168.0/2310.41.168.1 – 10.41.169.25410.41.169.255
2210.41.170.0/2310.41.170.1 – 10.41.171.25410.41.171.255
2310.41.172.0/2310.41.172.1 – 10.41.173.25410.41.173.255
2410.41.174.0/2310.41.174.1 – 10.41.175.25410.41.175.255
2510.41.176.0/2310.41.176.1 – 10.41.177.25410.41.177.255
2610.41.178.0/2310.41.178.1 – 10.41.179.25410.41.179.255
2710.41.180.0/2310.41.180.1 – 10.41.181.25410.41.181.255
2810.41.182.0/2310.41.182.1 – 10.41.183.25410.41.183.255
2910.41.184.0/2310.41.184.1 – 10.41.185.25410.41.185.255
3010.41.186.0/2310.41.186.1 – 10.41.187.25410.41.187.255
3110.41.188.0/2310.41.188.1 – 10.41.189.25410.41.189.255
3210.41.190.0/2310.41.190.1 – 10.41.191.25410.41.191.255
3310.41.192.0/2310.41.192.1 – 10.41.193.25410.41.193.255
3410.41.194.0/2310.41.194.1 – 10.41.195.25410.41.195.255
3510.41.196.0/2310.41.196.1 – 10.41.197.25410.41.197.255
3610.41.198.0/2310.41.198.1 – 10.41.199.25410.41.199.255
3710.41.200.0/2310.41.200.1 – 10.41.201.25410.41.201.255
3810.41.202.0/2310.41.202.1 – 10.41.203.25410.41.203.255
3910.41.204.0/2310.41.204.1 – 10.41.205.25410.41.205.255
4010.41.206.0/2310.41.206.1 – 10.41.207.25410.41.207.255
4110.41.208.0/2310.41.208.1 – 10.41.209.25410.41.209.255
4210.41.210.0/2310.41.210.1 – 10.41.211.25410.41.211.255
4310.41.212.0/2310.41.212.1 – 10.41.213.25410.41.213.255
4410.41.214.0/2310.41.214.1 – 10.41.215.25410.41.215.255
4510.41.216.0/2310.41.216.1 – 10.41.217.25410.41.217.255
4610.41.218.0/2310.41.218.1 – 10.41.219.25410.41.219.255
4710.41.220.0/2310.41.220.1 – 10.41.221.25410.41.221.255
4810.41.222.0/2310.41.222.1 – 10.41.223.25410.41.223.255
4910.41.224.0/2310.41.224.1 – 10.41.225.25410.41.225.255
5010.41.226.0/2310.41.226.1 – 10.41.227.25410.41.227.255
5110.41.228.0/2310.41.228.1 – 10.41.229.25410.41.229.255
5210.41.230.0/2310.41.230.1 – 10.41.231.25410.41.231.255
5310.41.232.0/2310.41.232.1 – 10.41.233.25410.41.233.255
5410.41.234.0/2310.41.234.1 – 10.41.235.25410.41.235.255
5510.41.236.0/2310.41.236.1 – 10.41.237.25410.41.237.255
5610.41.238.0/2310.41.238.1 – 10.41.239.25410.41.239.255
5710.41.240.0/2310.41.240.1 – 10.41.241.25410.41.241.255
5810.41.242.0/2310.41.242.1 – 10.41.243.25410.41.243.255
5910.41.244.0/2310.41.244.1 – 10.41.245.25410.41.245.255
6010.41.246.0/2310.41.246.1 – 10.41.247.25410.41.247.255
6110.41.248.0/2310.41.248.1 – 10.41.249.25410.41.249.255
6210.41.250.0/2310.41.250.1 – 10.41.251.25410.41.251.255
6310.41.252.0/2310.41.252.1 – 10.41.253.25410.41.253.255
6410.41.254.0/2310.41.254.1 – 10.41.255.25410.41.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /17
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,7661
/18255.255.192.016,38416,3822 split →
/19255.255.224.08,1928,1904 split →
/20255.255.240.04,0964,0948 split →
/21255.255.248.02,0482,04616 split →
/22255.255.252.01,0241,02232 split →
/23255.255.254.051251064 split →
/24255.255.255.0256254128 split →
/25255.255.255.128128126256 split →
/26255.255.255.1926462512 split →
/27255.255.255.22432301,024 split →
/28255.255.255.24016142,048 split →
/29255.255.255.248864,096 split →
/30255.255.255.252428,192 split →
/31255.255.255.2542216,384 split →
/32255.255.255.2551132,768 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →