ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.4.208.0/20
network10.4.208.0/20
broadcast10.4.223.255
first host10.4.208.1
last host10.4.223.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.4.208.0/20
address00001010.00000100.11010000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.00000100.11010000.00000000
broadcast00001010.00000100.11011111.11111111
green = network part, grey = host part
hex0x0a04d000
decimal168087552
reverse dns0.208.4.10.in-addr.arpa
ipv4-mapped::ffff:a04:d000

/20 split into /26 · 64 subnets

close ×
#networkhost rangebroadcast
110.4.208.0/2610.4.208.1 – 10.4.208.6210.4.208.63
210.4.208.64/2610.4.208.65 – 10.4.208.12610.4.208.127
310.4.208.128/2610.4.208.129 – 10.4.208.19010.4.208.191
410.4.208.192/2610.4.208.193 – 10.4.208.25410.4.208.255
510.4.209.0/2610.4.209.1 – 10.4.209.6210.4.209.63
610.4.209.64/2610.4.209.65 – 10.4.209.12610.4.209.127
710.4.209.128/2610.4.209.129 – 10.4.209.19010.4.209.191
810.4.209.192/2610.4.209.193 – 10.4.209.25410.4.209.255
910.4.210.0/2610.4.210.1 – 10.4.210.6210.4.210.63
1010.4.210.64/2610.4.210.65 – 10.4.210.12610.4.210.127
1110.4.210.128/2610.4.210.129 – 10.4.210.19010.4.210.191
1210.4.210.192/2610.4.210.193 – 10.4.210.25410.4.210.255
1310.4.211.0/2610.4.211.1 – 10.4.211.6210.4.211.63
1410.4.211.64/2610.4.211.65 – 10.4.211.12610.4.211.127
1510.4.211.128/2610.4.211.129 – 10.4.211.19010.4.211.191
1610.4.211.192/2610.4.211.193 – 10.4.211.25410.4.211.255
1710.4.212.0/2610.4.212.1 – 10.4.212.6210.4.212.63
1810.4.212.64/2610.4.212.65 – 10.4.212.12610.4.212.127
1910.4.212.128/2610.4.212.129 – 10.4.212.19010.4.212.191
2010.4.212.192/2610.4.212.193 – 10.4.212.25410.4.212.255
2110.4.213.0/2610.4.213.1 – 10.4.213.6210.4.213.63
2210.4.213.64/2610.4.213.65 – 10.4.213.12610.4.213.127
2310.4.213.128/2610.4.213.129 – 10.4.213.19010.4.213.191
2410.4.213.192/2610.4.213.193 – 10.4.213.25410.4.213.255
2510.4.214.0/2610.4.214.1 – 10.4.214.6210.4.214.63
2610.4.214.64/2610.4.214.65 – 10.4.214.12610.4.214.127
2710.4.214.128/2610.4.214.129 – 10.4.214.19010.4.214.191
2810.4.214.192/2610.4.214.193 – 10.4.214.25410.4.214.255
2910.4.215.0/2610.4.215.1 – 10.4.215.6210.4.215.63
3010.4.215.64/2610.4.215.65 – 10.4.215.12610.4.215.127
3110.4.215.128/2610.4.215.129 – 10.4.215.19010.4.215.191
3210.4.215.192/2610.4.215.193 – 10.4.215.25410.4.215.255
3310.4.216.0/2610.4.216.1 – 10.4.216.6210.4.216.63
3410.4.216.64/2610.4.216.65 – 10.4.216.12610.4.216.127
3510.4.216.128/2610.4.216.129 – 10.4.216.19010.4.216.191
3610.4.216.192/2610.4.216.193 – 10.4.216.25410.4.216.255
3710.4.217.0/2610.4.217.1 – 10.4.217.6210.4.217.63
3810.4.217.64/2610.4.217.65 – 10.4.217.12610.4.217.127
3910.4.217.128/2610.4.217.129 – 10.4.217.19010.4.217.191
4010.4.217.192/2610.4.217.193 – 10.4.217.25410.4.217.255
4110.4.218.0/2610.4.218.1 – 10.4.218.6210.4.218.63
4210.4.218.64/2610.4.218.65 – 10.4.218.12610.4.218.127
4310.4.218.128/2610.4.218.129 – 10.4.218.19010.4.218.191
4410.4.218.192/2610.4.218.193 – 10.4.218.25410.4.218.255
4510.4.219.0/2610.4.219.1 – 10.4.219.6210.4.219.63
4610.4.219.64/2610.4.219.65 – 10.4.219.12610.4.219.127
4710.4.219.128/2610.4.219.129 – 10.4.219.19010.4.219.191
4810.4.219.192/2610.4.219.193 – 10.4.219.25410.4.219.255
4910.4.220.0/2610.4.220.1 – 10.4.220.6210.4.220.63
5010.4.220.64/2610.4.220.65 – 10.4.220.12610.4.220.127
5110.4.220.128/2610.4.220.129 – 10.4.220.19010.4.220.191
5210.4.220.192/2610.4.220.193 – 10.4.220.25410.4.220.255
5310.4.221.0/2610.4.221.1 – 10.4.221.6210.4.221.63
5410.4.221.64/2610.4.221.65 – 10.4.221.12610.4.221.127
5510.4.221.128/2610.4.221.129 – 10.4.221.19010.4.221.191
5610.4.221.192/2610.4.221.193 – 10.4.221.25410.4.221.255
5710.4.222.0/2610.4.222.1 – 10.4.222.6210.4.222.63
5810.4.222.64/2610.4.222.65 – 10.4.222.12610.4.222.127
5910.4.222.128/2610.4.222.129 – 10.4.222.19010.4.222.191
6010.4.222.192/2610.4.222.193 – 10.4.222.25410.4.222.255
6110.4.223.0/2610.4.223.1 – 10.4.223.6210.4.223.63
6210.4.223.64/2610.4.223.65 – 10.4.223.12610.4.223.127
6310.4.223.128/2610.4.223.129 – 10.4.223.19010.4.223.191
6410.4.223.192/2610.4.223.193 – 10.4.223.25410.4.223.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →