ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.37.128.0/17
network10.37.128.0/17
broadcast10.37.255.255
first host10.37.128.1
last host10.37.255.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.37.128.0/17
address00001010.00100101.10000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.00100101.10000000.00000000
broadcast00001010.00100101.11111111.11111111
green = network part, grey = host part
hex0x0a258000
decimal170229760
reverse dns0.128.37.10.in-addr.arpa
ipv4-mapped::ffff:a25:8000

/17 split into /23 · 64 subnets

close ×
#networkhost rangebroadcast
110.37.128.0/2310.37.128.1 – 10.37.129.25410.37.129.255
210.37.130.0/2310.37.130.1 – 10.37.131.25410.37.131.255
310.37.132.0/2310.37.132.1 – 10.37.133.25410.37.133.255
410.37.134.0/2310.37.134.1 – 10.37.135.25410.37.135.255
510.37.136.0/2310.37.136.1 – 10.37.137.25410.37.137.255
610.37.138.0/2310.37.138.1 – 10.37.139.25410.37.139.255
710.37.140.0/2310.37.140.1 – 10.37.141.25410.37.141.255
810.37.142.0/2310.37.142.1 – 10.37.143.25410.37.143.255
910.37.144.0/2310.37.144.1 – 10.37.145.25410.37.145.255
1010.37.146.0/2310.37.146.1 – 10.37.147.25410.37.147.255
1110.37.148.0/2310.37.148.1 – 10.37.149.25410.37.149.255
1210.37.150.0/2310.37.150.1 – 10.37.151.25410.37.151.255
1310.37.152.0/2310.37.152.1 – 10.37.153.25410.37.153.255
1410.37.154.0/2310.37.154.1 – 10.37.155.25410.37.155.255
1510.37.156.0/2310.37.156.1 – 10.37.157.25410.37.157.255
1610.37.158.0/2310.37.158.1 – 10.37.159.25410.37.159.255
1710.37.160.0/2310.37.160.1 – 10.37.161.25410.37.161.255
1810.37.162.0/2310.37.162.1 – 10.37.163.25410.37.163.255
1910.37.164.0/2310.37.164.1 – 10.37.165.25410.37.165.255
2010.37.166.0/2310.37.166.1 – 10.37.167.25410.37.167.255
2110.37.168.0/2310.37.168.1 – 10.37.169.25410.37.169.255
2210.37.170.0/2310.37.170.1 – 10.37.171.25410.37.171.255
2310.37.172.0/2310.37.172.1 – 10.37.173.25410.37.173.255
2410.37.174.0/2310.37.174.1 – 10.37.175.25410.37.175.255
2510.37.176.0/2310.37.176.1 – 10.37.177.25410.37.177.255
2610.37.178.0/2310.37.178.1 – 10.37.179.25410.37.179.255
2710.37.180.0/2310.37.180.1 – 10.37.181.25410.37.181.255
2810.37.182.0/2310.37.182.1 – 10.37.183.25410.37.183.255
2910.37.184.0/2310.37.184.1 – 10.37.185.25410.37.185.255
3010.37.186.0/2310.37.186.1 – 10.37.187.25410.37.187.255
3110.37.188.0/2310.37.188.1 – 10.37.189.25410.37.189.255
3210.37.190.0/2310.37.190.1 – 10.37.191.25410.37.191.255
3310.37.192.0/2310.37.192.1 – 10.37.193.25410.37.193.255
3410.37.194.0/2310.37.194.1 – 10.37.195.25410.37.195.255
3510.37.196.0/2310.37.196.1 – 10.37.197.25410.37.197.255
3610.37.198.0/2310.37.198.1 – 10.37.199.25410.37.199.255
3710.37.200.0/2310.37.200.1 – 10.37.201.25410.37.201.255
3810.37.202.0/2310.37.202.1 – 10.37.203.25410.37.203.255
3910.37.204.0/2310.37.204.1 – 10.37.205.25410.37.205.255
4010.37.206.0/2310.37.206.1 – 10.37.207.25410.37.207.255
4110.37.208.0/2310.37.208.1 – 10.37.209.25410.37.209.255
4210.37.210.0/2310.37.210.1 – 10.37.211.25410.37.211.255
4310.37.212.0/2310.37.212.1 – 10.37.213.25410.37.213.255
4410.37.214.0/2310.37.214.1 – 10.37.215.25410.37.215.255
4510.37.216.0/2310.37.216.1 – 10.37.217.25410.37.217.255
4610.37.218.0/2310.37.218.1 – 10.37.219.25410.37.219.255
4710.37.220.0/2310.37.220.1 – 10.37.221.25410.37.221.255
4810.37.222.0/2310.37.222.1 – 10.37.223.25410.37.223.255
4910.37.224.0/2310.37.224.1 – 10.37.225.25410.37.225.255
5010.37.226.0/2310.37.226.1 – 10.37.227.25410.37.227.255
5110.37.228.0/2310.37.228.1 – 10.37.229.25410.37.229.255
5210.37.230.0/2310.37.230.1 – 10.37.231.25410.37.231.255
5310.37.232.0/2310.37.232.1 – 10.37.233.25410.37.233.255
5410.37.234.0/2310.37.234.1 – 10.37.235.25410.37.235.255
5510.37.236.0/2310.37.236.1 – 10.37.237.25410.37.237.255
5610.37.238.0/2310.37.238.1 – 10.37.239.25410.37.239.255
5710.37.240.0/2310.37.240.1 – 10.37.241.25410.37.241.255
5810.37.242.0/2310.37.242.1 – 10.37.243.25410.37.243.255
5910.37.244.0/2310.37.244.1 – 10.37.245.25410.37.245.255
6010.37.246.0/2310.37.246.1 – 10.37.247.25410.37.247.255
6110.37.248.0/2310.37.248.1 – 10.37.249.25410.37.249.255
6210.37.250.0/2310.37.250.1 – 10.37.251.25410.37.251.255
6310.37.252.0/2310.37.252.1 – 10.37.253.25410.37.253.255
6410.37.254.0/2310.37.254.1 – 10.37.255.25410.37.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /17
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,7661
/18255.255.192.016,38416,3822 split →
/19255.255.224.08,1928,1904 split →
/20255.255.240.04,0964,0948 split →
/21255.255.248.02,0482,04616 split →
/22255.255.252.01,0241,02232 split →
/23255.255.254.051251064 split →
/24255.255.255.0256254128 split →
/25255.255.255.128128126256 split →
/26255.255.255.1926462512 split →
/27255.255.255.22432301,024 split →
/28255.255.255.24016142,048 split →
/29255.255.255.248864,096 split →
/30255.255.255.252428,192 split →
/31255.255.255.2542216,384 split →
/32255.255.255.2551132,768 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →