ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.35.64.0/23
network10.35.64.0/23
broadcast10.35.65.255
first host10.35.64.1
last host10.35.65.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.35.64.0/23
address00001010.00100011.01000000.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00100011.01000000.00000000
broadcast00001010.00100011.01000001.11111111
green = network part, grey = host part
hex0x0a234000
decimal170082304
reverse dns0.64.35.10.in-addr.arpa
ipv4-mapped::ffff:a23:4000

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.35.64.0/2810.35.64.1 – 10.35.64.1410.35.64.15
210.35.64.16/2810.35.64.17 – 10.35.64.3010.35.64.31
310.35.64.32/2810.35.64.33 – 10.35.64.4610.35.64.47
410.35.64.48/2810.35.64.49 – 10.35.64.6210.35.64.63
510.35.64.64/2810.35.64.65 – 10.35.64.7810.35.64.79
610.35.64.80/2810.35.64.81 – 10.35.64.9410.35.64.95
710.35.64.96/2810.35.64.97 – 10.35.64.11010.35.64.111
810.35.64.112/2810.35.64.113 – 10.35.64.12610.35.64.127
910.35.64.128/2810.35.64.129 – 10.35.64.14210.35.64.143
1010.35.64.144/2810.35.64.145 – 10.35.64.15810.35.64.159
1110.35.64.160/2810.35.64.161 – 10.35.64.17410.35.64.175
1210.35.64.176/2810.35.64.177 – 10.35.64.19010.35.64.191
1310.35.64.192/2810.35.64.193 – 10.35.64.20610.35.64.207
1410.35.64.208/2810.35.64.209 – 10.35.64.22210.35.64.223
1510.35.64.224/2810.35.64.225 – 10.35.64.23810.35.64.239
1610.35.64.240/2810.35.64.241 – 10.35.64.25410.35.64.255
1710.35.65.0/2810.35.65.1 – 10.35.65.1410.35.65.15
1810.35.65.16/2810.35.65.17 – 10.35.65.3010.35.65.31
1910.35.65.32/2810.35.65.33 – 10.35.65.4610.35.65.47
2010.35.65.48/2810.35.65.49 – 10.35.65.6210.35.65.63
2110.35.65.64/2810.35.65.65 – 10.35.65.7810.35.65.79
2210.35.65.80/2810.35.65.81 – 10.35.65.9410.35.65.95
2310.35.65.96/2810.35.65.97 – 10.35.65.11010.35.65.111
2410.35.65.112/2810.35.65.113 – 10.35.65.12610.35.65.127
2510.35.65.128/2810.35.65.129 – 10.35.65.14210.35.65.143
2610.35.65.144/2810.35.65.145 – 10.35.65.15810.35.65.159
2710.35.65.160/2810.35.65.161 – 10.35.65.17410.35.65.175
2810.35.65.176/2810.35.65.177 – 10.35.65.19010.35.65.191
2910.35.65.192/2810.35.65.193 – 10.35.65.20610.35.65.207
3010.35.65.208/2810.35.65.209 – 10.35.65.22210.35.65.223
3110.35.65.224/2810.35.65.225 – 10.35.65.23810.35.65.239
3210.35.65.240/2810.35.65.241 – 10.35.65.25410.35.65.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →