ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.33.192.0/18
network10.33.192.0/18
broadcast10.33.255.255
first host10.33.192.1
last host10.33.255.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.33.192.0/18
address00001010.00100001.11000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00100001.11000000.00000000
broadcast00001010.00100001.11111111.11111111
green = network part, grey = host part
hex0x0a21c000
decimal169984000
reverse dns0.192.33.10.in-addr.arpa
ipv4-mapped::ffff:a21:c000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.33.192.0/2410.33.192.1 – 10.33.192.25410.33.192.255
210.33.193.0/2410.33.193.1 – 10.33.193.25410.33.193.255
310.33.194.0/2410.33.194.1 – 10.33.194.25410.33.194.255
410.33.195.0/2410.33.195.1 – 10.33.195.25410.33.195.255
510.33.196.0/2410.33.196.1 – 10.33.196.25410.33.196.255
610.33.197.0/2410.33.197.1 – 10.33.197.25410.33.197.255
710.33.198.0/2410.33.198.1 – 10.33.198.25410.33.198.255
810.33.199.0/2410.33.199.1 – 10.33.199.25410.33.199.255
910.33.200.0/2410.33.200.1 – 10.33.200.25410.33.200.255
1010.33.201.0/2410.33.201.1 – 10.33.201.25410.33.201.255
1110.33.202.0/2410.33.202.1 – 10.33.202.25410.33.202.255
1210.33.203.0/2410.33.203.1 – 10.33.203.25410.33.203.255
1310.33.204.0/2410.33.204.1 – 10.33.204.25410.33.204.255
1410.33.205.0/2410.33.205.1 – 10.33.205.25410.33.205.255
1510.33.206.0/2410.33.206.1 – 10.33.206.25410.33.206.255
1610.33.207.0/2410.33.207.1 – 10.33.207.25410.33.207.255
1710.33.208.0/2410.33.208.1 – 10.33.208.25410.33.208.255
1810.33.209.0/2410.33.209.1 – 10.33.209.25410.33.209.255
1910.33.210.0/2410.33.210.1 – 10.33.210.25410.33.210.255
2010.33.211.0/2410.33.211.1 – 10.33.211.25410.33.211.255
2110.33.212.0/2410.33.212.1 – 10.33.212.25410.33.212.255
2210.33.213.0/2410.33.213.1 – 10.33.213.25410.33.213.255
2310.33.214.0/2410.33.214.1 – 10.33.214.25410.33.214.255
2410.33.215.0/2410.33.215.1 – 10.33.215.25410.33.215.255
2510.33.216.0/2410.33.216.1 – 10.33.216.25410.33.216.255
2610.33.217.0/2410.33.217.1 – 10.33.217.25410.33.217.255
2710.33.218.0/2410.33.218.1 – 10.33.218.25410.33.218.255
2810.33.219.0/2410.33.219.1 – 10.33.219.25410.33.219.255
2910.33.220.0/2410.33.220.1 – 10.33.220.25410.33.220.255
3010.33.221.0/2410.33.221.1 – 10.33.221.25410.33.221.255
3110.33.222.0/2410.33.222.1 – 10.33.222.25410.33.222.255
3210.33.223.0/2410.33.223.1 – 10.33.223.25410.33.223.255
3310.33.224.0/2410.33.224.1 – 10.33.224.25410.33.224.255
3410.33.225.0/2410.33.225.1 – 10.33.225.25410.33.225.255
3510.33.226.0/2410.33.226.1 – 10.33.226.25410.33.226.255
3610.33.227.0/2410.33.227.1 – 10.33.227.25410.33.227.255
3710.33.228.0/2410.33.228.1 – 10.33.228.25410.33.228.255
3810.33.229.0/2410.33.229.1 – 10.33.229.25410.33.229.255
3910.33.230.0/2410.33.230.1 – 10.33.230.25410.33.230.255
4010.33.231.0/2410.33.231.1 – 10.33.231.25410.33.231.255
4110.33.232.0/2410.33.232.1 – 10.33.232.25410.33.232.255
4210.33.233.0/2410.33.233.1 – 10.33.233.25410.33.233.255
4310.33.234.0/2410.33.234.1 – 10.33.234.25410.33.234.255
4410.33.235.0/2410.33.235.1 – 10.33.235.25410.33.235.255
4510.33.236.0/2410.33.236.1 – 10.33.236.25410.33.236.255
4610.33.237.0/2410.33.237.1 – 10.33.237.25410.33.237.255
4710.33.238.0/2410.33.238.1 – 10.33.238.25410.33.238.255
4810.33.239.0/2410.33.239.1 – 10.33.239.25410.33.239.255
4910.33.240.0/2410.33.240.1 – 10.33.240.25410.33.240.255
5010.33.241.0/2410.33.241.1 – 10.33.241.25410.33.241.255
5110.33.242.0/2410.33.242.1 – 10.33.242.25410.33.242.255
5210.33.243.0/2410.33.243.1 – 10.33.243.25410.33.243.255
5310.33.244.0/2410.33.244.1 – 10.33.244.25410.33.244.255
5410.33.245.0/2410.33.245.1 – 10.33.245.25410.33.245.255
5510.33.246.0/2410.33.246.1 – 10.33.246.25410.33.246.255
5610.33.247.0/2410.33.247.1 – 10.33.247.25410.33.247.255
5710.33.248.0/2410.33.248.1 – 10.33.248.25410.33.248.255
5810.33.249.0/2410.33.249.1 – 10.33.249.25410.33.249.255
5910.33.250.0/2410.33.250.1 – 10.33.250.25410.33.250.255
6010.33.251.0/2410.33.251.1 – 10.33.251.25410.33.251.255
6110.33.252.0/2410.33.252.1 – 10.33.252.25410.33.252.255
6210.33.253.0/2410.33.253.1 – 10.33.253.25410.33.253.255
6310.33.254.0/2410.33.254.1 – 10.33.254.25410.33.254.255
6410.33.255.0/2410.33.255.1 – 10.33.255.25410.33.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →