ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.31.96.0/19
network10.31.96.0/19
broadcast10.31.127.255
first host10.31.96.1
last host10.31.127.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.31.96.0/19
address00001010.00011111.01100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00011111.01100000.00000000
broadcast00001010.00011111.01111111.11111111
green = network part, grey = host part
hex0x0a1f6000
decimal169828352
reverse dns0.96.31.10.in-addr.arpa
ipv4-mapped::ffff:a1f:6000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.31.96.0/2410.31.96.1 – 10.31.96.25410.31.96.255
210.31.97.0/2410.31.97.1 – 10.31.97.25410.31.97.255
310.31.98.0/2410.31.98.1 – 10.31.98.25410.31.98.255
410.31.99.0/2410.31.99.1 – 10.31.99.25410.31.99.255
510.31.100.0/2410.31.100.1 – 10.31.100.25410.31.100.255
610.31.101.0/2410.31.101.1 – 10.31.101.25410.31.101.255
710.31.102.0/2410.31.102.1 – 10.31.102.25410.31.102.255
810.31.103.0/2410.31.103.1 – 10.31.103.25410.31.103.255
910.31.104.0/2410.31.104.1 – 10.31.104.25410.31.104.255
1010.31.105.0/2410.31.105.1 – 10.31.105.25410.31.105.255
1110.31.106.0/2410.31.106.1 – 10.31.106.25410.31.106.255
1210.31.107.0/2410.31.107.1 – 10.31.107.25410.31.107.255
1310.31.108.0/2410.31.108.1 – 10.31.108.25410.31.108.255
1410.31.109.0/2410.31.109.1 – 10.31.109.25410.31.109.255
1510.31.110.0/2410.31.110.1 – 10.31.110.25410.31.110.255
1610.31.111.0/2410.31.111.1 – 10.31.111.25410.31.111.255
1710.31.112.0/2410.31.112.1 – 10.31.112.25410.31.112.255
1810.31.113.0/2410.31.113.1 – 10.31.113.25410.31.113.255
1910.31.114.0/2410.31.114.1 – 10.31.114.25410.31.114.255
2010.31.115.0/2410.31.115.1 – 10.31.115.25410.31.115.255
2110.31.116.0/2410.31.116.1 – 10.31.116.25410.31.116.255
2210.31.117.0/2410.31.117.1 – 10.31.117.25410.31.117.255
2310.31.118.0/2410.31.118.1 – 10.31.118.25410.31.118.255
2410.31.119.0/2410.31.119.1 – 10.31.119.25410.31.119.255
2510.31.120.0/2410.31.120.1 – 10.31.120.25410.31.120.255
2610.31.121.0/2410.31.121.1 – 10.31.121.25410.31.121.255
2710.31.122.0/2410.31.122.1 – 10.31.122.25410.31.122.255
2810.31.123.0/2410.31.123.1 – 10.31.123.25410.31.123.255
2910.31.124.0/2410.31.124.1 – 10.31.124.25410.31.124.255
3010.31.125.0/2410.31.125.1 – 10.31.125.25410.31.125.255
3110.31.126.0/2410.31.126.1 – 10.31.126.25410.31.126.255
3210.31.127.0/2410.31.127.1 – 10.31.127.25410.31.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →