ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.30.64.0/19
network10.30.64.0/19
broadcast10.30.95.255
first host10.30.64.1
last host10.30.95.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.30.64.0/19
address00001010.00011110.01000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00011110.01000000.00000000
broadcast00001010.00011110.01011111.11111111
green = network part, grey = host part
hex0x0a1e4000
decimal169754624
reverse dns0.64.30.10.in-addr.arpa
ipv4-mapped::ffff:a1e:4000

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.30.64.0/2510.30.64.1 – 10.30.64.12610.30.64.127
210.30.64.128/2510.30.64.129 – 10.30.64.25410.30.64.255
310.30.65.0/2510.30.65.1 – 10.30.65.12610.30.65.127
410.30.65.128/2510.30.65.129 – 10.30.65.25410.30.65.255
510.30.66.0/2510.30.66.1 – 10.30.66.12610.30.66.127
610.30.66.128/2510.30.66.129 – 10.30.66.25410.30.66.255
710.30.67.0/2510.30.67.1 – 10.30.67.12610.30.67.127
810.30.67.128/2510.30.67.129 – 10.30.67.25410.30.67.255
910.30.68.0/2510.30.68.1 – 10.30.68.12610.30.68.127
1010.30.68.128/2510.30.68.129 – 10.30.68.25410.30.68.255
1110.30.69.0/2510.30.69.1 – 10.30.69.12610.30.69.127
1210.30.69.128/2510.30.69.129 – 10.30.69.25410.30.69.255
1310.30.70.0/2510.30.70.1 – 10.30.70.12610.30.70.127
1410.30.70.128/2510.30.70.129 – 10.30.70.25410.30.70.255
1510.30.71.0/2510.30.71.1 – 10.30.71.12610.30.71.127
1610.30.71.128/2510.30.71.129 – 10.30.71.25410.30.71.255
1710.30.72.0/2510.30.72.1 – 10.30.72.12610.30.72.127
1810.30.72.128/2510.30.72.129 – 10.30.72.25410.30.72.255
1910.30.73.0/2510.30.73.1 – 10.30.73.12610.30.73.127
2010.30.73.128/2510.30.73.129 – 10.30.73.25410.30.73.255
2110.30.74.0/2510.30.74.1 – 10.30.74.12610.30.74.127
2210.30.74.128/2510.30.74.129 – 10.30.74.25410.30.74.255
2310.30.75.0/2510.30.75.1 – 10.30.75.12610.30.75.127
2410.30.75.128/2510.30.75.129 – 10.30.75.25410.30.75.255
2510.30.76.0/2510.30.76.1 – 10.30.76.12610.30.76.127
2610.30.76.128/2510.30.76.129 – 10.30.76.25410.30.76.255
2710.30.77.0/2510.30.77.1 – 10.30.77.12610.30.77.127
2810.30.77.128/2510.30.77.129 – 10.30.77.25410.30.77.255
2910.30.78.0/2510.30.78.1 – 10.30.78.12610.30.78.127
3010.30.78.128/2510.30.78.129 – 10.30.78.25410.30.78.255
3110.30.79.0/2510.30.79.1 – 10.30.79.12610.30.79.127
3210.30.79.128/2510.30.79.129 – 10.30.79.25410.30.79.255
3310.30.80.0/2510.30.80.1 – 10.30.80.12610.30.80.127
3410.30.80.128/2510.30.80.129 – 10.30.80.25410.30.80.255
3510.30.81.0/2510.30.81.1 – 10.30.81.12610.30.81.127
3610.30.81.128/2510.30.81.129 – 10.30.81.25410.30.81.255
3710.30.82.0/2510.30.82.1 – 10.30.82.12610.30.82.127
3810.30.82.128/2510.30.82.129 – 10.30.82.25410.30.82.255
3910.30.83.0/2510.30.83.1 – 10.30.83.12610.30.83.127
4010.30.83.128/2510.30.83.129 – 10.30.83.25410.30.83.255
4110.30.84.0/2510.30.84.1 – 10.30.84.12610.30.84.127
4210.30.84.128/2510.30.84.129 – 10.30.84.25410.30.84.255
4310.30.85.0/2510.30.85.1 – 10.30.85.12610.30.85.127
4410.30.85.128/2510.30.85.129 – 10.30.85.25410.30.85.255
4510.30.86.0/2510.30.86.1 – 10.30.86.12610.30.86.127
4610.30.86.128/2510.30.86.129 – 10.30.86.25410.30.86.255
4710.30.87.0/2510.30.87.1 – 10.30.87.12610.30.87.127
4810.30.87.128/2510.30.87.129 – 10.30.87.25410.30.87.255
4910.30.88.0/2510.30.88.1 – 10.30.88.12610.30.88.127
5010.30.88.128/2510.30.88.129 – 10.30.88.25410.30.88.255
5110.30.89.0/2510.30.89.1 – 10.30.89.12610.30.89.127
5210.30.89.128/2510.30.89.129 – 10.30.89.25410.30.89.255
5310.30.90.0/2510.30.90.1 – 10.30.90.12610.30.90.127
5410.30.90.128/2510.30.90.129 – 10.30.90.25410.30.90.255
5510.30.91.0/2510.30.91.1 – 10.30.91.12610.30.91.127
5610.30.91.128/2510.30.91.129 – 10.30.91.25410.30.91.255
5710.30.92.0/2510.30.92.1 – 10.30.92.12610.30.92.127
5810.30.92.128/2510.30.92.129 – 10.30.92.25410.30.92.255
5910.30.93.0/2510.30.93.1 – 10.30.93.12610.30.93.127
6010.30.93.128/2510.30.93.129 – 10.30.93.25410.30.93.255
6110.30.94.0/2510.30.94.1 – 10.30.94.12610.30.94.127
6210.30.94.128/2510.30.94.129 – 10.30.94.25410.30.94.255
6310.30.95.0/2510.30.95.1 – 10.30.95.12610.30.95.127
6410.30.95.128/2510.30.95.129 – 10.30.95.25410.30.95.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →