ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.3.96.0/21
network10.3.96.0/21
broadcast10.3.103.255
first host10.3.96.1
last host10.3.103.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.3.96.0/21
address00001010.00000011.01100000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.00000011.01100000.00000000
broadcast00001010.00000011.01100111.11111111
green = network part, grey = host part
hex0x0a036000
decimal167993344
reverse dns0.96.3.10.in-addr.arpa
ipv4-mapped::ffff:a03:6000

/21 split into /25 · 16 subnets

close ×
#networkhost rangebroadcast
110.3.96.0/2510.3.96.1 – 10.3.96.12610.3.96.127
210.3.96.128/2510.3.96.129 – 10.3.96.25410.3.96.255
310.3.97.0/2510.3.97.1 – 10.3.97.12610.3.97.127
410.3.97.128/2510.3.97.129 – 10.3.97.25410.3.97.255
510.3.98.0/2510.3.98.1 – 10.3.98.12610.3.98.127
610.3.98.128/2510.3.98.129 – 10.3.98.25410.3.98.255
710.3.99.0/2510.3.99.1 – 10.3.99.12610.3.99.127
810.3.99.128/2510.3.99.129 – 10.3.99.25410.3.99.255
910.3.100.0/2510.3.100.1 – 10.3.100.12610.3.100.127
1010.3.100.128/2510.3.100.129 – 10.3.100.25410.3.100.255
1110.3.101.0/2510.3.101.1 – 10.3.101.12610.3.101.127
1210.3.101.128/2510.3.101.129 – 10.3.101.25410.3.101.255
1310.3.102.0/2510.3.102.1 – 10.3.102.12610.3.102.127
1410.3.102.128/2510.3.102.129 – 10.3.102.25410.3.102.255
1510.3.103.0/2510.3.103.1 – 10.3.103.12610.3.103.127
1610.3.103.128/2510.3.103.129 – 10.3.103.25410.3.103.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →