ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.3.53.0/24
network10.3.53.0/24
broadcast10.3.53.255
first host10.3.53.1
last host10.3.53.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.3.53.0/24
address00001010.00000011.00110101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000011.00110101.00000000
broadcast00001010.00000011.00110101.11111111
green = network part, grey = host part
hex0x0a033500
decimal167982336
reverse dns0.53.3.10.in-addr.arpa
ipv4-mapped::ffff:a03:3500

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.3.53.0/2910.3.53.1 – 10.3.53.610.3.53.7
210.3.53.8/2910.3.53.9 – 10.3.53.1410.3.53.15
310.3.53.16/2910.3.53.17 – 10.3.53.2210.3.53.23
410.3.53.24/2910.3.53.25 – 10.3.53.3010.3.53.31
510.3.53.32/2910.3.53.33 – 10.3.53.3810.3.53.39
610.3.53.40/2910.3.53.41 – 10.3.53.4610.3.53.47
710.3.53.48/2910.3.53.49 – 10.3.53.5410.3.53.55
810.3.53.56/2910.3.53.57 – 10.3.53.6210.3.53.63
910.3.53.64/2910.3.53.65 – 10.3.53.7010.3.53.71
1010.3.53.72/2910.3.53.73 – 10.3.53.7810.3.53.79
1110.3.53.80/2910.3.53.81 – 10.3.53.8610.3.53.87
1210.3.53.88/2910.3.53.89 – 10.3.53.9410.3.53.95
1310.3.53.96/2910.3.53.97 – 10.3.53.10210.3.53.103
1410.3.53.104/2910.3.53.105 – 10.3.53.11010.3.53.111
1510.3.53.112/2910.3.53.113 – 10.3.53.11810.3.53.119
1610.3.53.120/2910.3.53.121 – 10.3.53.12610.3.53.127
1710.3.53.128/2910.3.53.129 – 10.3.53.13410.3.53.135
1810.3.53.136/2910.3.53.137 – 10.3.53.14210.3.53.143
1910.3.53.144/2910.3.53.145 – 10.3.53.15010.3.53.151
2010.3.53.152/2910.3.53.153 – 10.3.53.15810.3.53.159
2110.3.53.160/2910.3.53.161 – 10.3.53.16610.3.53.167
2210.3.53.168/2910.3.53.169 – 10.3.53.17410.3.53.175
2310.3.53.176/2910.3.53.177 – 10.3.53.18210.3.53.183
2410.3.53.184/2910.3.53.185 – 10.3.53.19010.3.53.191
2510.3.53.192/2910.3.53.193 – 10.3.53.19810.3.53.199
2610.3.53.200/2910.3.53.201 – 10.3.53.20610.3.53.207
2710.3.53.208/2910.3.53.209 – 10.3.53.21410.3.53.215
2810.3.53.216/2910.3.53.217 – 10.3.53.22210.3.53.223
2910.3.53.224/2910.3.53.225 – 10.3.53.23010.3.53.231
3010.3.53.232/2910.3.53.233 – 10.3.53.23810.3.53.239
3110.3.53.240/2910.3.53.241 – 10.3.53.24610.3.53.247
3210.3.53.248/2910.3.53.249 – 10.3.53.25410.3.53.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →