ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.3.48.0/21
network10.3.48.0/21
broadcast10.3.55.255
first host10.3.48.1
last host10.3.55.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.3.48.0/21
address00001010.00000011.00110000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.00000011.00110000.00000000
broadcast00001010.00000011.00110111.11111111
green = network part, grey = host part
hex0x0a033000
decimal167981056
reverse dns0.48.3.10.in-addr.arpa
ipv4-mapped::ffff:a03:3000

/21 split into /26 · 32 subnets

close ×
#networkhost rangebroadcast
110.3.48.0/2610.3.48.1 – 10.3.48.6210.3.48.63
210.3.48.64/2610.3.48.65 – 10.3.48.12610.3.48.127
310.3.48.128/2610.3.48.129 – 10.3.48.19010.3.48.191
410.3.48.192/2610.3.48.193 – 10.3.48.25410.3.48.255
510.3.49.0/2610.3.49.1 – 10.3.49.6210.3.49.63
610.3.49.64/2610.3.49.65 – 10.3.49.12610.3.49.127
710.3.49.128/2610.3.49.129 – 10.3.49.19010.3.49.191
810.3.49.192/2610.3.49.193 – 10.3.49.25410.3.49.255
910.3.50.0/2610.3.50.1 – 10.3.50.6210.3.50.63
1010.3.50.64/2610.3.50.65 – 10.3.50.12610.3.50.127
1110.3.50.128/2610.3.50.129 – 10.3.50.19010.3.50.191
1210.3.50.192/2610.3.50.193 – 10.3.50.25410.3.50.255
1310.3.51.0/2610.3.51.1 – 10.3.51.6210.3.51.63
1410.3.51.64/2610.3.51.65 – 10.3.51.12610.3.51.127
1510.3.51.128/2610.3.51.129 – 10.3.51.19010.3.51.191
1610.3.51.192/2610.3.51.193 – 10.3.51.25410.3.51.255
1710.3.52.0/2610.3.52.1 – 10.3.52.6210.3.52.63
1810.3.52.64/2610.3.52.65 – 10.3.52.12610.3.52.127
1910.3.52.128/2610.3.52.129 – 10.3.52.19010.3.52.191
2010.3.52.192/2610.3.52.193 – 10.3.52.25410.3.52.255
2110.3.53.0/2610.3.53.1 – 10.3.53.6210.3.53.63
2210.3.53.64/2610.3.53.65 – 10.3.53.12610.3.53.127
2310.3.53.128/2610.3.53.129 – 10.3.53.19010.3.53.191
2410.3.53.192/2610.3.53.193 – 10.3.53.25410.3.53.255
2510.3.54.0/2610.3.54.1 – 10.3.54.6210.3.54.63
2610.3.54.64/2610.3.54.65 – 10.3.54.12610.3.54.127
2710.3.54.128/2610.3.54.129 – 10.3.54.19010.3.54.191
2810.3.54.192/2610.3.54.193 – 10.3.54.25410.3.54.255
2910.3.55.0/2610.3.55.1 – 10.3.55.6210.3.55.63
3010.3.55.64/2610.3.55.65 – 10.3.55.12610.3.55.127
3110.3.55.128/2610.3.55.129 – 10.3.55.19010.3.55.191
3210.3.55.192/2610.3.55.193 – 10.3.55.25410.3.55.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →