ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.3.32.0/19
network10.3.32.0/19
broadcast10.3.63.255
first host10.3.32.1
last host10.3.63.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.3.32.0/19
address00001010.00000011.00100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00000011.00100000.00000000
broadcast00001010.00000011.00111111.11111111
green = network part, grey = host part
hex0x0a032000
decimal167976960
reverse dns0.32.3.10.in-addr.arpa
ipv4-mapped::ffff:a03:2000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.3.32.0/2410.3.32.1 – 10.3.32.25410.3.32.255
210.3.33.0/2410.3.33.1 – 10.3.33.25410.3.33.255
310.3.34.0/2410.3.34.1 – 10.3.34.25410.3.34.255
410.3.35.0/2410.3.35.1 – 10.3.35.25410.3.35.255
510.3.36.0/2410.3.36.1 – 10.3.36.25410.3.36.255
610.3.37.0/2410.3.37.1 – 10.3.37.25410.3.37.255
710.3.38.0/2410.3.38.1 – 10.3.38.25410.3.38.255
810.3.39.0/2410.3.39.1 – 10.3.39.25410.3.39.255
910.3.40.0/2410.3.40.1 – 10.3.40.25410.3.40.255
1010.3.41.0/2410.3.41.1 – 10.3.41.25410.3.41.255
1110.3.42.0/2410.3.42.1 – 10.3.42.25410.3.42.255
1210.3.43.0/2410.3.43.1 – 10.3.43.25410.3.43.255
1310.3.44.0/2410.3.44.1 – 10.3.44.25410.3.44.255
1410.3.45.0/2410.3.45.1 – 10.3.45.25410.3.45.255
1510.3.46.0/2410.3.46.1 – 10.3.46.25410.3.46.255
1610.3.47.0/2410.3.47.1 – 10.3.47.25410.3.47.255
1710.3.48.0/2410.3.48.1 – 10.3.48.25410.3.48.255
1810.3.49.0/2410.3.49.1 – 10.3.49.25410.3.49.255
1910.3.50.0/2410.3.50.1 – 10.3.50.25410.3.50.255
2010.3.51.0/2410.3.51.1 – 10.3.51.25410.3.51.255
2110.3.52.0/2410.3.52.1 – 10.3.52.25410.3.52.255
2210.3.53.0/2410.3.53.1 – 10.3.53.25410.3.53.255
2310.3.54.0/2410.3.54.1 – 10.3.54.25410.3.54.255
2410.3.55.0/2410.3.55.1 – 10.3.55.25410.3.55.255
2510.3.56.0/2410.3.56.1 – 10.3.56.25410.3.56.255
2610.3.57.0/2410.3.57.1 – 10.3.57.25410.3.57.255
2710.3.58.0/2410.3.58.1 – 10.3.58.25410.3.58.255
2810.3.59.0/2410.3.59.1 – 10.3.59.25410.3.59.255
2910.3.60.0/2410.3.60.1 – 10.3.60.25410.3.60.255
3010.3.61.0/2410.3.61.1 – 10.3.61.25410.3.61.255
3110.3.62.0/2410.3.62.1 – 10.3.62.25410.3.62.255
3210.3.63.0/2410.3.63.1 – 10.3.63.25410.3.63.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →