ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.29.96.0/22
network10.29.96.0/22
broadcast10.29.99.255
first host10.29.96.1
last host10.29.99.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.29.96.0/22
address00001010.00011101.01100000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00011101.01100000.00000000
broadcast00001010.00011101.01100011.11111111
green = network part, grey = host part
hex0x0a1d6000
decimal169697280
reverse dns0.96.29.10.in-addr.arpa
ipv4-mapped::ffff:a1d:6000

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.29.96.0/2810.29.96.1 – 10.29.96.1410.29.96.15
210.29.96.16/2810.29.96.17 – 10.29.96.3010.29.96.31
310.29.96.32/2810.29.96.33 – 10.29.96.4610.29.96.47
410.29.96.48/2810.29.96.49 – 10.29.96.6210.29.96.63
510.29.96.64/2810.29.96.65 – 10.29.96.7810.29.96.79
610.29.96.80/2810.29.96.81 – 10.29.96.9410.29.96.95
710.29.96.96/2810.29.96.97 – 10.29.96.11010.29.96.111
810.29.96.112/2810.29.96.113 – 10.29.96.12610.29.96.127
910.29.96.128/2810.29.96.129 – 10.29.96.14210.29.96.143
1010.29.96.144/2810.29.96.145 – 10.29.96.15810.29.96.159
1110.29.96.160/2810.29.96.161 – 10.29.96.17410.29.96.175
1210.29.96.176/2810.29.96.177 – 10.29.96.19010.29.96.191
1310.29.96.192/2810.29.96.193 – 10.29.96.20610.29.96.207
1410.29.96.208/2810.29.96.209 – 10.29.96.22210.29.96.223
1510.29.96.224/2810.29.96.225 – 10.29.96.23810.29.96.239
1610.29.96.240/2810.29.96.241 – 10.29.96.25410.29.96.255
1710.29.97.0/2810.29.97.1 – 10.29.97.1410.29.97.15
1810.29.97.16/2810.29.97.17 – 10.29.97.3010.29.97.31
1910.29.97.32/2810.29.97.33 – 10.29.97.4610.29.97.47
2010.29.97.48/2810.29.97.49 – 10.29.97.6210.29.97.63
2110.29.97.64/2810.29.97.65 – 10.29.97.7810.29.97.79
2210.29.97.80/2810.29.97.81 – 10.29.97.9410.29.97.95
2310.29.97.96/2810.29.97.97 – 10.29.97.11010.29.97.111
2410.29.97.112/2810.29.97.113 – 10.29.97.12610.29.97.127
2510.29.97.128/2810.29.97.129 – 10.29.97.14210.29.97.143
2610.29.97.144/2810.29.97.145 – 10.29.97.15810.29.97.159
2710.29.97.160/2810.29.97.161 – 10.29.97.17410.29.97.175
2810.29.97.176/2810.29.97.177 – 10.29.97.19010.29.97.191
2910.29.97.192/2810.29.97.193 – 10.29.97.20610.29.97.207
3010.29.97.208/2810.29.97.209 – 10.29.97.22210.29.97.223
3110.29.97.224/2810.29.97.225 – 10.29.97.23810.29.97.239
3210.29.97.240/2810.29.97.241 – 10.29.97.25410.29.97.255
3310.29.98.0/2810.29.98.1 – 10.29.98.1410.29.98.15
3410.29.98.16/2810.29.98.17 – 10.29.98.3010.29.98.31
3510.29.98.32/2810.29.98.33 – 10.29.98.4610.29.98.47
3610.29.98.48/2810.29.98.49 – 10.29.98.6210.29.98.63
3710.29.98.64/2810.29.98.65 – 10.29.98.7810.29.98.79
3810.29.98.80/2810.29.98.81 – 10.29.98.9410.29.98.95
3910.29.98.96/2810.29.98.97 – 10.29.98.11010.29.98.111
4010.29.98.112/2810.29.98.113 – 10.29.98.12610.29.98.127
4110.29.98.128/2810.29.98.129 – 10.29.98.14210.29.98.143
4210.29.98.144/2810.29.98.145 – 10.29.98.15810.29.98.159
4310.29.98.160/2810.29.98.161 – 10.29.98.17410.29.98.175
4410.29.98.176/2810.29.98.177 – 10.29.98.19010.29.98.191
4510.29.98.192/2810.29.98.193 – 10.29.98.20610.29.98.207
4610.29.98.208/2810.29.98.209 – 10.29.98.22210.29.98.223
4710.29.98.224/2810.29.98.225 – 10.29.98.23810.29.98.239
4810.29.98.240/2810.29.98.241 – 10.29.98.25410.29.98.255
4910.29.99.0/2810.29.99.1 – 10.29.99.1410.29.99.15
5010.29.99.16/2810.29.99.17 – 10.29.99.3010.29.99.31
5110.29.99.32/2810.29.99.33 – 10.29.99.4610.29.99.47
5210.29.99.48/2810.29.99.49 – 10.29.99.6210.29.99.63
5310.29.99.64/2810.29.99.65 – 10.29.99.7810.29.99.79
5410.29.99.80/2810.29.99.81 – 10.29.99.9410.29.99.95
5510.29.99.96/2810.29.99.97 – 10.29.99.11010.29.99.111
5610.29.99.112/2810.29.99.113 – 10.29.99.12610.29.99.127
5710.29.99.128/2810.29.99.129 – 10.29.99.14210.29.99.143
5810.29.99.144/2810.29.99.145 – 10.29.99.15810.29.99.159
5910.29.99.160/2810.29.99.161 – 10.29.99.17410.29.99.175
6010.29.99.176/2810.29.99.177 – 10.29.99.19010.29.99.191
6110.29.99.192/2810.29.99.193 – 10.29.99.20610.29.99.207
6210.29.99.208/2810.29.99.209 – 10.29.99.22210.29.99.223
6310.29.99.224/2810.29.99.225 – 10.29.99.23810.29.99.239
6410.29.99.240/2810.29.99.241 – 10.29.99.25410.29.99.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →