ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.29.167.0/24
network10.29.167.0/24
broadcast10.29.167.255
first host10.29.167.1
last host10.29.167.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.29.167.0/24
address00001010.00011101.10100111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00011101.10100111.00000000
broadcast00001010.00011101.10100111.11111111
green = network part, grey = host part
hex0x0a1da700
decimal169715456
reverse dns0.167.29.10.in-addr.arpa
ipv4-mapped::ffff:a1d:a700

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.29.167.0/3010.29.167.1 – 10.29.167.210.29.167.3
210.29.167.4/3010.29.167.5 – 10.29.167.610.29.167.7
310.29.167.8/3010.29.167.9 – 10.29.167.1010.29.167.11
410.29.167.12/3010.29.167.13 – 10.29.167.1410.29.167.15
510.29.167.16/3010.29.167.17 – 10.29.167.1810.29.167.19
610.29.167.20/3010.29.167.21 – 10.29.167.2210.29.167.23
710.29.167.24/3010.29.167.25 – 10.29.167.2610.29.167.27
810.29.167.28/3010.29.167.29 – 10.29.167.3010.29.167.31
910.29.167.32/3010.29.167.33 – 10.29.167.3410.29.167.35
1010.29.167.36/3010.29.167.37 – 10.29.167.3810.29.167.39
1110.29.167.40/3010.29.167.41 – 10.29.167.4210.29.167.43
1210.29.167.44/3010.29.167.45 – 10.29.167.4610.29.167.47
1310.29.167.48/3010.29.167.49 – 10.29.167.5010.29.167.51
1410.29.167.52/3010.29.167.53 – 10.29.167.5410.29.167.55
1510.29.167.56/3010.29.167.57 – 10.29.167.5810.29.167.59
1610.29.167.60/3010.29.167.61 – 10.29.167.6210.29.167.63
1710.29.167.64/3010.29.167.65 – 10.29.167.6610.29.167.67
1810.29.167.68/3010.29.167.69 – 10.29.167.7010.29.167.71
1910.29.167.72/3010.29.167.73 – 10.29.167.7410.29.167.75
2010.29.167.76/3010.29.167.77 – 10.29.167.7810.29.167.79
2110.29.167.80/3010.29.167.81 – 10.29.167.8210.29.167.83
2210.29.167.84/3010.29.167.85 – 10.29.167.8610.29.167.87
2310.29.167.88/3010.29.167.89 – 10.29.167.9010.29.167.91
2410.29.167.92/3010.29.167.93 – 10.29.167.9410.29.167.95
2510.29.167.96/3010.29.167.97 – 10.29.167.9810.29.167.99
2610.29.167.100/3010.29.167.101 – 10.29.167.10210.29.167.103
2710.29.167.104/3010.29.167.105 – 10.29.167.10610.29.167.107
2810.29.167.108/3010.29.167.109 – 10.29.167.11010.29.167.111
2910.29.167.112/3010.29.167.113 – 10.29.167.11410.29.167.115
3010.29.167.116/3010.29.167.117 – 10.29.167.11810.29.167.119
3110.29.167.120/3010.29.167.121 – 10.29.167.12210.29.167.123
3210.29.167.124/3010.29.167.125 – 10.29.167.12610.29.167.127
3310.29.167.128/3010.29.167.129 – 10.29.167.13010.29.167.131
3410.29.167.132/3010.29.167.133 – 10.29.167.13410.29.167.135
3510.29.167.136/3010.29.167.137 – 10.29.167.13810.29.167.139
3610.29.167.140/3010.29.167.141 – 10.29.167.14210.29.167.143
3710.29.167.144/3010.29.167.145 – 10.29.167.14610.29.167.147
3810.29.167.148/3010.29.167.149 – 10.29.167.15010.29.167.151
3910.29.167.152/3010.29.167.153 – 10.29.167.15410.29.167.155
4010.29.167.156/3010.29.167.157 – 10.29.167.15810.29.167.159
4110.29.167.160/3010.29.167.161 – 10.29.167.16210.29.167.163
4210.29.167.164/3010.29.167.165 – 10.29.167.16610.29.167.167
4310.29.167.168/3010.29.167.169 – 10.29.167.17010.29.167.171
4410.29.167.172/3010.29.167.173 – 10.29.167.17410.29.167.175
4510.29.167.176/3010.29.167.177 – 10.29.167.17810.29.167.179
4610.29.167.180/3010.29.167.181 – 10.29.167.18210.29.167.183
4710.29.167.184/3010.29.167.185 – 10.29.167.18610.29.167.187
4810.29.167.188/3010.29.167.189 – 10.29.167.19010.29.167.191
4910.29.167.192/3010.29.167.193 – 10.29.167.19410.29.167.195
5010.29.167.196/3010.29.167.197 – 10.29.167.19810.29.167.199
5110.29.167.200/3010.29.167.201 – 10.29.167.20210.29.167.203
5210.29.167.204/3010.29.167.205 – 10.29.167.20610.29.167.207
5310.29.167.208/3010.29.167.209 – 10.29.167.21010.29.167.211
5410.29.167.212/3010.29.167.213 – 10.29.167.21410.29.167.215
5510.29.167.216/3010.29.167.217 – 10.29.167.21810.29.167.219
5610.29.167.220/3010.29.167.221 – 10.29.167.22210.29.167.223
5710.29.167.224/3010.29.167.225 – 10.29.167.22610.29.167.227
5810.29.167.228/3010.29.167.229 – 10.29.167.23010.29.167.231
5910.29.167.232/3010.29.167.233 – 10.29.167.23410.29.167.235
6010.29.167.236/3010.29.167.237 – 10.29.167.23810.29.167.239
6110.29.167.240/3010.29.167.241 – 10.29.167.24210.29.167.243
6210.29.167.244/3010.29.167.245 – 10.29.167.24610.29.167.247
6310.29.167.248/3010.29.167.249 – 10.29.167.25010.29.167.251
6410.29.167.252/3010.29.167.253 – 10.29.167.25410.29.167.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →